[U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
tien.fong.chee at intel.com
Thu Feb 14 15:15:53 UTC 2019
On Thu, 2019-02-14 at 13:28 +0100, Marek Vasut wrote:
> On 2/14/19 12:38 PM, Chee, Tien Fong wrote:
> >
> > On Thu, 2019-02-14 at 11:42 +0100, Marek Vasut wrote:
> > >
> > > On 2/14/19 7:50 AM, Chee, Tien Fong wrote:
> > > >
> > > >
> > > > On Wed, 2019-02-13 at 17:25 +0100, Marek Vasut wrote:
> > > > >
> > > > >
> > > > > On 2/13/19 3:18 PM, tien.fong.chee at intel.com wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > > > > >
> > > > > > Add support for loading FPGA bitstream to get DDR up
> > > > > > running
> > > > > > before
> > > > > > U-Boot is loaded into DDR. Boot device initialization,
> > > > > > generic
> > > > > > firmware
> > > > > > loader and SPL FAT support are required for this whole
> > > > > > mechanism to
> > > > > > work.
> > > > > >
> > > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> > > > > >
> > > > > > ---
> > > > > >
> > > > > > changes for v7
> > > > > > - Removed casting for get_fpga_filename
> > > > > > - Removed hard coding DDR address for loading core
> > > > > > bistream,
> > > > > > using
> > > > > > loadable
> > > > > > property from FIT.
> > > > > > - Added checking for config_pins, return if error.
> > > > > > ---
> > > > > > arch/arm/mach-socfpga/spl_a10.c | 41
> > > > > > ++++++++++++++++++++++++++++++++++++++++-
> > > > > > 1 file changed, 40 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/arch/arm/mach-socfpga/spl_a10.c
> > > > > > b/arch/arm/mach-
> > > > > > socfpga/spl_a10.c
> > > > > > index c97eacb..36003b1 100644
> > > > > > --- a/arch/arm/mach-socfpga/spl_a10.c
> > > > > > +++ b/arch/arm/mach-socfpga/spl_a10.c
> > > > > > @@ -1,6 +1,6 @@
> > > > > > // SPDX-License-Identifier: GPL-2.0+
> > > > > > /*
> > > > > > - * Copyright (C) 2012 Altera Corporation <www.altera.com>
> > > > > > + * Copyright (C) 2012-2019 Altera Corporation <www.altera
> > > > > > .com
> > > > > > >
> > > > > > >
> > > > > > */
> > > > > >
> > > > > > #include <common.h>
> > > > > > @@ -23,6 +23,8 @@
> > > > > > #include <fdtdec.h>
> > > > > > #include <watchdog.h>
> > > > > > #include <asm/arch/pinmux.h>
> > > > > > +#include <asm/arch/fpga_manager.h>
> > > > > > +#include <mmc.h>
> > > > > >
> > > > > > DECLARE_GLOBAL_DATA_PTR;
> > > > > >
> > > > > > @@ -68,11 +70,48 @@ u32 spl_boot_mode(const u32
> > > > > > boot_device)
> > > > > >
> > > > > > void spl_board_init(void)
> > > > > > {
> > > > > > + char buf[16 * 1024] __aligned(ARCH_DMA_MINALIGN);
> > > > > ALLOC_CACHE_ALIGN_BUFFER()
> > > > #define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE
> > > > They are not same thing?
> > > See include/memalign.h and other drivers, the macro is preferred
> > > as
> > > it
> > > hides the details.
> > Okay.
> > >
> > >
> > > >
> > > >
> > > > >
> > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > +
> > > > > > /* enable console uart printing */
> > > > > > preloader_console_init();
> > > > > > WATCHDOG_RESET();
> > > > > >
> > > > > > arch_early_init_r();
> > > > > > +
> > > > > > + /* If the full FPGA is already loaded, ie.from
> > > > > > EPCQ,
> > > > > > config fpga pins */
> > > > > > + if (is_fpgamgr_user_mode()) {
> > > > > > + int ret = config_pins(gd->fdt_blob,
> > > > > > "shared");
> > > > > > +
> > > > > > + if (ret)
> > > > > > + return;
> > > > > > +
> > > > > > + ret = config_pins(gd->fdt_blob, "fpga");
> > > > > > + if (ret)
> > > > > > + return;
> > > > > > + } else if (!is_fpgamgr_early_user_mode()) {
> > > > > > + /* Program IOSSM(early IO release) or full
> > > > > > FPGA */
> > > > > > + fpga_fs_info fpga_fsinfo;
> > > > > > + int len;
> > > > > > +
> > > > > > + fpga_fsinfo.filename =
> > > > > > get_fpga_filename(gd-
> > > > > > >
> > > > > > >
> > > > > > > fdt_blob, &len);
> > > > > > +
> > > > > > + if (fpga_fsinfo.filename)
> > > > > > + socfpga_loadfs(&fpga_fsinfo, buf,
> > > > > > sizeof(buf), 0);
> > > > > Why is this code here twice ? The same code seems to be below
> > > > > ...
> > > > The 1st calling for periph program, then running ddr
> > > > calibration,
> > > > then
> > > > 2nd calling for core program.
> > > Then maybe the code can be deduplicated ?
> > Hmm...seems cannot, because
> > 1. DDR calibration is not part of fpga code.
> > 2. fpga driver can only be used to process one bistream at a time,
> > because different mode has different handling.
> + } else if (!is_fpgamgr_early_user_mode()) {
> + /* Program IOSSM(early IO release) or full FPGA */
> + fpga_fs_info fpga_fsinfo;
> + int len;
> +
> + fpga_fsinfo.filename = get_fpga_filename(gd-
> >fdt_blob, &len);
> +
> + if (fpga_fsinfo.filename)
> + socfpga_loadfs(&fpga_fsinfo, buf,
> sizeof(buf), 0);
> ...
> + if (!is_fpgamgr_user_mode()) {
> + fpga_fs_info fpga_fsinfo;
> + int len;
> +
> + fpga_fsinfo.filename = get_fpga_filename(gd-
> >fdt_blob, &len);
> +
> + if (fpga_fsinfo.filename)
> + socfpga_loadfs(&fpga_fsinfo, buf,
> sizeof(buf), 0);
>
> These two chunks look the same to me , no ?
Yes, they are being called twice at different fpga mode, and different
sequence, before and after DDR calibration.
>
More information about the U-Boot
mailing list