[U-Boot] [PATCH v5 1/2] arm: i.MX: Add CMD_NANDBCB Kconfig entry

[Shyam Saini]

> >
> > Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6
> > platform with NAND_MXS defined.
> >
> > Reviewed-by: Stefano Babic <sbabic at denx.de>
> > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> > Signed-off-by: Shyam Saini <shyam.saini at amarulasolutions.com>
> > ---
> > Hi,
> >
> > This patch series is based on feedback gathered from this [1] discussion
> > and [2] patch submitted by Stefan.
> >
> > [1] https://patchwork.ozlabs.org/patch/870467/
> > [2] https://patchwork.ozlabs.org/patch/897222/
> >
> > Changes for v5:
> > - New patch
> > Changes for v4:
> > - No change
> > Changes for v3:
> > - Fixed Typo 'seprate'
> > Changes for v2:
> > - New patch
> >  arch/arm/mach-imx/Kconfig | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> > index ec09ef240f..5dd286f9a7 100644
> > --- a/arch/arm/mach-imx/Kconfig
> > +++ b/arch/arm/mach-imx/Kconfig
> > @@ -71,6 +71,17 @@ config CMD_HDMIDETECT
> >           This enables the 'hdmidet' command which detects if an HDMI monitor
> >           is connected.
> >
> > +config CMD_NANDBCB
> > +       bool "i.MX6 NAND Boot Control Block(BCB) command"
> > +       depends on NAND && CMD_MTDPARTS
> > +       default y if ARCH_MX6 && NAND_MXS
> > +       help
> > +         Unlike normal 'nand write/erase' commands, this command update
> > +         Boot Control Block(BCB) for i.MX6 platform NAND IP's.
> > +
> > +         This is similar to kobs-ng, which is used in Linux as separate
> > +         rootfs package.
> > +
>
> This patch structuring is not in proper order.
>
> 01: Add support for nandbcb (would have all required code, kconfig,
> makefile changes)
> 02: Enable it on board config.
> 03: Readme, about the steps.

okay, will fix this in next version.

Thanks!!