[U-Boot] [PATCH v2 1/1] colibri_imx7: introduce androidboot wrapper
Igor Opaniuk
igor.opaniuk at gmail.com
Tue Jun 18 11:57:32 UTC 2019
From: Igor Opaniuk <igor.opaniuk at toradex.com>
1. Introduce androidboot wrapper for booting AOSP.
2. Add partitions_android env var for simplifying the process of
writing new gpt table from U-boot shell/fastboot.
Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---
v2:
- add proper serialnum value for bootargs instead hardcoded stub
- add invocation of m4 aux binary
configs/colibri_imx7_emmc_defconfig | 2 +-
include/configs/colibri_imx7.h | 44 +++++++++++++++++++++++++++--
2 files changed, 43 insertions(+), 3 deletions(-)
diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig
index 2fa9f1f532..864234eac4 100644
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@@ -28,7 +28,7 @@ CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
-# CONFIG_RANDOM_UUID is not set
+CONFIG_RANDOM_UUID=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 3e4f63e7ba..5655c75376 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -48,6 +48,46 @@
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
+#ifndef PARTS_DEFAULT
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+ /* Android partitions */ \
+ "partitions_android=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=boot,start=1M,size=32M,uuid=${uuid_gpt_boot};" \
+ "name=environment,size=4M,uuid=${uuid_gpt_environment};" \
+ "name=recovery,size=16M,uuid=${uuid_gpt_recovery};" \
+ "name=system,size=1536M,uuid=${uuid_gpt_system};" \
+ "name=cache,size=512M,uuid=${uuid_gpt_cache};" \
+ "name=device,size=8M,uuid=${uuid_gpt_device};" \
+ "name=misc,size=4M,uuid=${uuid_gpt_misc};" \
+ "name=datafooter,size=2M,uuid=${uuid_gpt_datafooter};" \
+ "name=metadata,size=2M,uuid=${uuid_gpt_metadata};" \
+ "name=persistdata,size=2M,uuid=${uuid_gpt_persistdata};" \
+ "name=userdata,size=128M,uuid=${uuid_gpt_userdata};" \
+ "name=fbmisc,size=-,uuid=${uuid_gpt_fbmisc}\0"
+#endif /* PARTS_DEFAULT */
+
+#define EMMC_ANDROID_BOOTCMD \
+ "android_args=androidboot.storage_type=emmc\0" \
+ PARTS_DEFAULT \
+ "android_fdt_addr=0x83700000\0" \
+ "android_mmc_dev=0\0" \
+ "m4binary=rpmsg_imu_freertos.elf\0" \
+ "androidboot=ext4load mmc 0:a ${loadaddr} media/0/${m4binary}; "\
+ "bootaux ${loadaddr}; " \
+ "setenv loadaddr 0x88000000; " \
+ "setenv bootm_boot_mode sec;" \
+ "setenv bootargs androidboot.serialno=${serial#} " \
+ "$android_args; " \
+ "part start mmc ${android_mmc_dev} boot boot_start; " \
+ "part size mmc ${android_mmc_dev} boot boot_size; " \
+ "mmc read ${loadaddr} ${boot_start} ${boot_size}; " \
+ "part start mmc ${android_mmc_dev} environment env_start; " \
+ "part size mmc ${android_mmc_dev} environment env_size; " \
+ "mmc read ${android_fdt_addr} ${env_start} ${env_size}; " \
+ "bootm ${loadaddr} ${loadaddr} ${android_fdt_addr}\0 "
+
#define EMMC_BOOTCMD \
"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \
"rootfstype=ext4 rootwait\0" \
@@ -65,7 +105,6 @@
"emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \
"emmcrootpart=2\0"
-
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82000000\0" \
@@ -127,7 +166,8 @@
"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
#define MODULE_EXTRA_ENV_SETTINGS \
"variant=-emmc\0" \
- EMMC_BOOTCMD
+ EMMC_BOOTCMD \
+ EMMC_ANDROID_BOOTCMD
#endif
#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
--
2.17.1
More information about the U-Boot
mailing list