[U-Boot] [PATCH v4 6/6] Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip

[Jagan Teki]

Add u-boot.itb BUILD_TARGET for Rockchip platform when SPL_LOAD_FIT
is being used.

This can get rid of building itb explicitly with 'make u-boot.itb'
so, from now all required images will build just by make.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
 Kconfig                                    | 2 +-
 board/theobroma-systems/puma_rk3399/README | 2 +-
 board/vamrs/rock960_rk3399/README          | 1 -
 doc/README.rockchip                        | 2 --
 4 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/Kconfig b/Kconfig
index 6b44256538..df8f2946c5 100644
--- a/Kconfig
+++ b/Kconfig
@@ -250,7 +250,7 @@ config BUILD_TARGET
 	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
 	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
 	default "u-boot-elf.srec" if RCAR_GEN3
-	default "u-boot.itb" if SPL_LOAD_FIT && ARCH_SUNXI
+	default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
 	default "u-boot.kwb" if KIRKWOOD
 	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
 	help
diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README
index f67dfb451f..9b31b0b379 100644
--- a/board/theobroma-systems/puma_rk3399/README
+++ b/board/theobroma-systems/puma_rk3399/README
@@ -60,7 +60,7 @@ Creating a SPL image for SD-Card/eMMC
 Creating a SPL image for SPI-NOR
   > tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin spl_nor.img
 Create the FIT image containing U-Boot proper, ATF, M0 Firmware, devicetree
-  > make CROSS_COMPILE=aarch64-linux-gnu- u-boot.itb
+  > make CROSS_COMPILE=aarch64-linux-gnu-
 
 Flash the image
 ===============
diff --git a/board/vamrs/rock960_rk3399/README b/board/vamrs/rock960_rk3399/README
index d14399090e..c5c675c4ea 100644
--- a/board/vamrs/rock960_rk3399/README
+++ b/board/vamrs/rock960_rk3399/README
@@ -61,7 +61,6 @@ Compile the U-Boot
   > export CROSS_COMPILE=aarch64-linux-gnu-
   > make rock960-rk3399_defconfig
   > make
-  > make u-boot.itb
 
 Compile the rkdeveloptool
 =========================
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 0ee54cd00e..fac87ade2c 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -103,7 +103,6 @@ For example:
      => cd /path/to/u-boot
      => make nanopi-neo4-rk3399_defconfig
      => make
-     => make u-boot.itb
 
    - Get the rkbin
 
@@ -170,7 +169,6 @@ For example:
      => cd /path/to/u-boot
      => make orangepi-rk3399_defconfig
      => make
-     => make u-boot.itb
 
      (Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get
       spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL
-- 
2.18.0.321.gffc6fa0e3