[U-Boot] [PATCH v4 5/6] board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0
Kever Yang
kever.yang at rock-chips.com
Fri Jun 21 09:39:48 UTC 2019
On 06/20/2019 06:07 PM, Jagan Teki wrote:
> Right now puma rk3399 board need to copy bl31-rk3399.bin and
> rk3399m0.bin into u-boot source directory to make use of building
> u-boot.itb.
>
> So, add environment variable
> - BL31 for bl31.bin (instead of bl31-rk3399.bin to compatible with other
> platform BL31 env)
> - PMUM0 for rk3399m0.bin
>
> If the builds are not exporting BL31, PMUM0 env, the fit_spl_atf.sh will
> notify with warning about which document to refer for more information
> like this:
>
> WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
> Please read Building section in doc/README.rockchip
> WARNING: PMUM0 file rk3399m0.bin NOT found, resulting binary is non-functional
> Please read Building section in doc/README.rockchip
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> .../puma_rk3399/fit_spl_atf.its | 58 ------------
> .../puma_rk3399/fit_spl_atf.sh | 94 +++++++++++++++++++
> configs/puma-rk3399_defconfig | 2 +-
> doc/README.rockchip | 8 +-
> 4 files changed, 99 insertions(+), 63 deletions(-)
> delete mode 100644 board/theobroma-systems/puma_rk3399/fit_spl_atf.its
> create mode 100755 board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
>
> diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
> deleted file mode 100644
> index 530f059f3d..0000000000
> --- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
> -/*
> - * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
> - *
> - * Minimal dts for a SPL FIT image payload.
> - */
> -
> -/dts-v1/;
> -
> -/ {
> - description = "FIT image with U-Boot proper, ATF bl31, M0 Firmware, DTB";
> - #address-cells = <1>;
> -
> - images {
> - uboot {
> - description = "U-Boot (64-bit)";
> - data = /incbin/("../../../u-boot-nodtb.bin");
> - type = "standalone";
> - os = "U-Boot";
> - arch = "arm64";
> - compression = "none";
> - load = <0x00200000>;
> - };
> - atf {
> - description = "ARM Trusted Firmware";
> - data = /incbin/("../../../bl31-rk3399.bin");
> - type = "firmware";
> - arch = "arm64";
> - os = "arm-trusted-firmware";
> - compression = "none";
> - load = <0x1000>;
> - entry = <0x1000>;
> - };
> - pmu {
> - description = "Cortex-M0 firmware";
> - data = /incbin/("../../../rk3399m0.bin");
> - type = "pmu-firmware";
> - compression = "none";
> - load = <0x180000>;
> - };
> - fdt {
> - description = "RK3399-Q7 (Puma) flat device-tree";
> - data = /incbin/("../../../u-boot.dtb");
> - type = "flat_dt";
> - compression = "none";
> - };
> - };
> -
> - configurations {
> - default = "conf";
> - conf {
> - description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
> - firmware = "atf";
> - loadables = "uboot", "pmu";
> - fdt = "fdt";
> - };
> - };
> -};
> diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
> new file mode 100755
> index 0000000000..420e7daf4c
> --- /dev/null
> +++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
> @@ -0,0 +1,94 @@
> +#!/bin/sh
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2019 Jagan Teki <jagan at amarulasolutions.com>
> +#
> +# Based on the board/sunxi/mksunxi_fit_atf.sh
> +#
> +# Script to generate FIT image source for 64-bit puma boards with
> +# U-Boot proper, ATF, PMU firmware and devicetree.
> +#
> +# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
> +
> +[ -z "$BL31" ] && BL31="bl31.bin"
> +
> +if [ ! -f $BL31 ]; then
> + echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
> + echo "Please read Building section in doc/README.rockchip" >&2
> + BL31=/dev/null
> +fi
> +
> +[ -z "$PMUM0" ] && PMUM0="rk3399m0.bin"
> +
> +if [ ! -f $PMUM0 ]; then
> + echo "WARNING: PMUM0 file $PMUM0 NOT found, resulting binary is non-functional" >&2
> + echo "Please read Building section in doc/README.rockchip" >&2
> + PMUM0=/dev/null
> +fi
> +
> +cat << __HEADER_EOF
> +/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
> +/*
> + * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
> + *
> + * Minimal dts for a SPL FIT image payload.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> + description = "FIT image with U-Boot proper, ATF bl31, M0 Firmware, DTB";
> + #address-cells = <1>;
> +
> + images {
> + uboot {
> + description = "U-Boot (64-bit)";
> + data = /incbin/("u-boot-nodtb.bin");
> + type = "standalone";
> + arch = "arm64";
> + compression = "none";
> + load = <0x4a000000>;
> + };
> + atf {
> + description = "ARM Trusted Firmware";
> + data = /incbin/("$BL31");
> + type = "firmware";
> + arch = "arm64";
> + os = "arm-trusted-firmware";
> + compression = "none";
> + load = <0x1000>;
> + entry = <0x1000>;
> + };
> + pmu {
> + description = "Cortex-M0 firmware";
> + data = /incbin/("$PMUM0");
> + type = "pmu-firmware";
> + compression = "none";
> + load = <0x180000>;
> + };
> + fdt {
> + description = "RK3399-Q7 (Puma) flat device-tree";
> + data = /incbin/("u-boot.dtb");
> + type = "flat_dt";
> + compression = "none";
> + };
> +__HEADER_EOF
> +
> +cat << __CONF_HEADER_EOF
> + };
> +
> + configurations {
> + default = "conf";
> + conf {
> + description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
> + firmware = "atf";
> + loadables = "uboot", "pmu";
> + fdt = "fdt";
> + };
> +__CONF_HEADER_EOF
> +
> +cat << __ITS_EOF
> + };
> +};
> +__ITS_EOF
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index 03f0bfdb59..ebc78fb216 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -15,7 +15,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> CONFIG_DEBUG_UART=y
> -CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
> +CONFIG_SPL_FIT_GENERATOR="board/theobroma-systems/puma_rk3399/fit_spl_atf.sh"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
> CONFIG_MISC_INIT_R=y
> # CONFIG_DISPLAY_CPUINFO is not set
> diff --git a/doc/README.rockchip b/doc/README.rockchip
> index 5680c075fa..0ee54cd00e 100644
> --- a/doc/README.rockchip
> +++ b/doc/README.rockchip
> @@ -137,8 +137,8 @@ For example:
> => cd arm-trusted-firmware
> => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
>
> - (copy bl31.bin into U-Boot root dir)
> - => cp build/rk3399/release/bl31/bl31.bin /path/to/u-boot/bl31-rk3399.bin
> + (export bl31.bin)
> + => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.bin
>
> For rest of rk3399 boards.
>
> @@ -162,8 +162,8 @@ For example:
> (export cross compiler path for Cortex-M0 PMU)
> => make CROSS_COMPILE=arm-cortex_m0-eabi-
>
> - (copy rk3399m0.bin into U-Boot root dir)
> - => cp rk3399m0.bin /path/to/u-boot
> + (export rk3399m0.bin)
> + => export PMUM0=/path/to/rk3399-cortex-m0/rk3399m0.bin
>
> - Compile U-Boot
>
More information about the U-Boot
mailing list