[U-Boot] [PATCH v5 15/18] clk: sandbox: Adjust clk-mux.c to emulate reading divider value from HW

Lukasz Majewski lukma at denx.de
Mon Jun 24 13:50:49 UTC 2019


The generic mux clock code for CCF requires reading the clock multiplexer
value from HW registers. As sandbox by design has readl() as no-op it was
necessary to provide this value in the other way.

The new field in the mux structure (accessible only when sandbox is run)
has been introduced for this purpose.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 drivers/clk/clk-mux.c        | 10 +++++++++-
 include/linux/clk-provider.h |  4 ++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 14b9f2b1d9..3c075aa09e 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -64,7 +64,12 @@ static u8 clk_mux_get_parent(struct clk *clk)
 	struct clk_mux *mux = to_clk_mux(clk);
 	u32 val;
 
-	val = readl(mux->reg) >> mux->shift;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+	val = mux->io_mux_val;
+#else
+	val = readl(mux->reg);
+#endif
+	val >>= mux->shift;
 	val &= mux->mask;
 
 	return clk_mux_val_to_index(clk, mux->table, mux->flags, val);
@@ -108,6 +113,9 @@ struct clk *clk_hw_register_mux_table(struct device *dev, const char *name,
 	mux->mask = mask;
 	mux->flags = clk_mux_flags;
 	mux->table = table;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+	mux->io_mux_val = *(u32 *)reg;
+#endif
 
 	clk = &mux->clk;
 
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 53c9c41b90..43a25e9c6a 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -59,6 +59,10 @@ struct clk_mux {
 	 */
 	const char	* const *parent_names;
 	u8		num_parents;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+	u32             io_mux_val;
+#endif
+
 };
 
 #define to_clk_mux(_clk) container_of(_clk, struct clk_mux, clk)
-- 
2.11.0



More information about the U-Boot mailing list