[U-Boot] [PATCH v9 6/9] net: macb: Extend MACB driver for SiFive Unleashed board
Anup Patel
Anup.Patel at wdc.com
Tue Jun 25 06:31:38 UTC 2019
The SiFive MACB ethernet has a custom TX_CLK_SEL register to select
different TX clock for 1000mbps vs 10/100mbps.
This patch adds SiFive MACB compatible string and extends the MACB
ethernet driver to change TX clock using TX_CLK_SEL register for
SiFive MACB.
Signed-off-by: Anup Patel <anup.patel at wdc.com>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---
drivers/net/macb.c | 70 +++++++++++++++++++++++++++++++++++-----------
1 file changed, 53 insertions(+), 17 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index c072f99d8f..322302762a 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -83,7 +83,8 @@ struct macb_dma_desc {
struct macb_device {
void *regs;
- unsigned int dma_burst_length;
+
+ const struct macb_config*config;
unsigned int rx_tail;
unsigned int tx_head;
@@ -123,6 +124,8 @@ struct macb_device {
struct macb_config {
unsigned int dma_burst_length;
+
+ int (*clk_init)(struct udevice *dev, ulong rate);
};
#ifndef CONFIG_DM_ETH
@@ -483,21 +486,38 @@ static int macb_phy_find(struct macb_device *macb, const char *name)
* when operation failed.
*/
#ifdef CONFIG_DM_ETH
+static int macb_sifive_clk_init(struct udevice *dev, ulong rate)
+{
+ fdt_addr_t addr;
+ void *gemgxl_regs;
+
+ addr = dev_read_addr_index(dev, 1);
+ if (addr == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ gemgxl_regs = (void __iomem *)addr;
+ if (!gemgxl_regs)
+ return -ENODEV;
+
+ /*
+ * SiFive GEMGXL TX clock operation mode:
+ *
+ * 0 = GMII mode. Use 125 MHz gemgxlclk from PRCI in TX logic
+ * and output clock on GMII output signal GTX_CLK
+ * 1 = MII mode. Use MII input signal TX_CLK in TX logic
+ */
+ writel(rate != 125000000, gemgxl_regs);
+ return 0;
+}
+
int __weak macb_linkspd_cb(struct udevice *dev, unsigned int speed)
{
#ifdef CONFIG_CLK
+ struct macb_device *macb = dev_get_priv(dev);
struct clk tx_clk;
ulong rate;
int ret;
- /*
- * "tx_clk" is an optional clock source for MACB.
- * Ignore if it does not exist in DT.
- */
- ret = clk_get_by_name(dev, "tx_clk", &tx_clk);
- if (ret)
- return 0;
-
switch (speed) {
case _10BASET:
rate = 2500000; /* 2.5 MHz */
@@ -513,6 +533,17 @@ int __weak macb_linkspd_cb(struct udevice *dev, unsigned int speed)
return 0;
}
+ if (macb->config->clk_init)
+ return macb->config->clk_init(dev, rate);
+
+ /*
+ * "tx_clk" is an optional clock source for MACB.
+ * Ignore if it does not exist in DT.
+ */
+ ret = clk_get_by_name(dev, "tx_clk", &tx_clk);
+ if (ret)
+ return 0;
+
if (tx_clk.dev) {
ret = clk_set_rate(&tx_clk, rate);
if (ret)
@@ -705,8 +736,9 @@ static void gmac_configure_dma(struct macb_device *macb)
dmacfg = gem_readl(macb, DMACFG) & ~GEM_BF(RXBS, -1L);
dmacfg |= GEM_BF(RXBS, buffer_size);
- if (macb->dma_burst_length)
- dmacfg = GEM_BFINS(FBLDO, macb->dma_burst_length, dmacfg);
+ if (macb->config->dma_burst_length)
+ dmacfg = GEM_BFINS(FBLDO,
+ macb->config->dma_burst_length, dmacfg);
dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L);
dmacfg &= ~GEM_BIT(ENDIA_PKT);
@@ -1173,11 +1205,10 @@ static const struct macb_config default_gem_config = {
static int macb_eth_probe(struct udevice *dev)
{
- const struct macb_config *macb_config;
struct eth_pdata *pdata = dev_get_platdata(dev);
struct macb_device *macb = dev_get_priv(dev);
const char *phy_mode;
- __maybe_unused int ret;
+ int ret;
phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
NULL);
@@ -1190,11 +1221,10 @@ static int macb_eth_probe(struct udevice *dev)
macb->regs = (void *)pdata->iobase;
- macb_config = (struct macb_config *)dev_get_driver_data(dev);
- if (!macb_config)
- macb_config = &default_gem_config;
+ macb->config = (struct macb_config *)dev_get_driver_data(dev);
+ if (!macb->config)
+ macb->config = &default_gem_config;
- macb->dma_burst_length = macb_config->dma_burst_length;
#ifdef CONFIG_CLK
ret = macb_enable_clk(dev);
if (ret)
@@ -1259,6 +1289,11 @@ static const struct macb_config sama5d4_config = {
.dma_burst_length = 4,
};
+static const struct macb_config sifive_config = {
+ .dma_burst_length = 16,
+ .clk_init = macb_sifive_clk_init,
+};
+
static const struct udevice_id macb_eth_ids[] = {
{ .compatible = "cdns,macb" },
{ .compatible = "cdns,at91sam9260-macb" },
@@ -1266,6 +1301,7 @@ static const struct udevice_id macb_eth_ids[] = {
{ .compatible = "atmel,sama5d3-gem" },
{ .compatible = "atmel,sama5d4-gem", .data = (ulong)&sama5d4_config },
{ .compatible = "cdns,zynq-gem" },
+ { .compatible = "sifive,fu540-macb", .data = (ulong)&sifive_config },
{ }
};
--
2.17.1
More information about the U-Boot
mailing list