[U-Boot] [PATCH v9 6/9] net: macb: Extend MACB driver for SiFive Unleashed board

Ramon Fried rfried.dev at gmail.com
Tue Jun 25 07:13:04 UTC 2019


On 6/25/2019 09:31, Anup Patel wrote:
> The SiFive MACB ethernet has a custom TX_CLK_SEL register to select
> different TX clock for 1000mbps vs 10/100mbps.
>
> This patch adds SiFive MACB compatible string and extends the MACB
> ethernet driver to change TX clock using TX_CLK_SEL register for
> SiFive MACB.
>
> Signed-off-by: Anup Patel <anup.patel at wdc.com>
> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>   drivers/net/macb.c | 70 +++++++++++++++++++++++++++++++++++-----------
>   1 file changed, 53 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index c072f99d8f..322302762a 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -83,7 +83,8 @@ struct macb_dma_desc {
>   
>   struct macb_device {
>   	void			*regs;
> -	unsigned int		dma_burst_length;
> +
> +	const struct macb_config*config;
>   
>   	unsigned int		rx_tail;
>   	unsigned int		tx_head;
> @@ -123,6 +124,8 @@ struct macb_device {
>   
>   struct macb_config {
>   	unsigned int		dma_burst_length;
> +
> +	int			(*clk_init)(struct udevice *dev, ulong rate);
>   };
>   
>   #ifndef CONFIG_DM_ETH
> @@ -483,21 +486,38 @@ static int macb_phy_find(struct macb_device *macb, const char *name)
>    * when operation failed.
>    */
>   #ifdef CONFIG_DM_ETH
> +static int macb_sifive_clk_init(struct udevice *dev, ulong rate)
> +{
> +	fdt_addr_t addr;
> +	void *gemgxl_regs;
> +
> +	addr = dev_read_addr_index(dev, 1);
> +	if (addr == FDT_ADDR_T_NONE)
> +		return -ENODEV;
> +
> +	gemgxl_regs = (void __iomem *)addr;
> +	if (!gemgxl_regs)
> +		return -ENODEV;
> +
> +	/*
> +	 * SiFive GEMGXL TX clock operation mode:
> +	 *
> +	 * 0 = GMII mode. Use 125 MHz gemgxlclk from PRCI in TX logic
> +	 *     and output clock on GMII output signal GTX_CLK
> +	 * 1 = MII mode. Use MII input signal TX_CLK in TX logic
> +	 */
> +	writel(rate != 125000000, gemgxl_regs);
> +	return 0;
> +}
> +
>   int __weak macb_linkspd_cb(struct udevice *dev, unsigned int speed)
>   {
>   #ifdef CONFIG_CLK
> +	struct macb_device *macb = dev_get_priv(dev);
>   	struct clk tx_clk;
>   	ulong rate;
>   	int ret;
>   
> -	/*
> -	 * "tx_clk" is an optional clock source for MACB.
> -	 * Ignore if it does not exist in DT.
> -	 */
> -	ret = clk_get_by_name(dev, "tx_clk", &tx_clk);
> -	if (ret)
> -		return 0;
> -
>   	switch (speed) {
>   	case _10BASET:
>   		rate = 2500000;		/* 2.5 MHz */
> @@ -513,6 +533,17 @@ int __weak macb_linkspd_cb(struct udevice *dev, unsigned int speed)
>   		return 0;
>   	}
>   
> +	if (macb->config->clk_init)
> +		return macb->config->clk_init(dev, rate);
> +
> +	/*
> +	 * "tx_clk" is an optional clock source for MACB.
> +	 * Ignore if it does not exist in DT.
> +	 */
> +	ret = clk_get_by_name(dev, "tx_clk", &tx_clk);
> +	if (ret)
> +		return 0;
> +
>   	if (tx_clk.dev) {
>   		ret = clk_set_rate(&tx_clk, rate);
>   		if (ret)
> @@ -705,8 +736,9 @@ static void gmac_configure_dma(struct macb_device *macb)
>   	dmacfg = gem_readl(macb, DMACFG) & ~GEM_BF(RXBS, -1L);
>   	dmacfg |= GEM_BF(RXBS, buffer_size);
>   
> -	if (macb->dma_burst_length)
> -		dmacfg = GEM_BFINS(FBLDO, macb->dma_burst_length, dmacfg);
> +	if (macb->config->dma_burst_length)
> +		dmacfg = GEM_BFINS(FBLDO,
> +				   macb->config->dma_burst_length, dmacfg);
>   
>   	dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L);
>   	dmacfg &= ~GEM_BIT(ENDIA_PKT);
> @@ -1173,11 +1205,10 @@ static const struct macb_config default_gem_config = {
>   
>   static int macb_eth_probe(struct udevice *dev)
>   {
> -	const struct macb_config *macb_config;
>   	struct eth_pdata *pdata = dev_get_platdata(dev);
>   	struct macb_device *macb = dev_get_priv(dev);
>   	const char *phy_mode;
> -	__maybe_unused int ret;
> +	int ret;
>   
>   	phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
>   			       NULL);
> @@ -1190,11 +1221,10 @@ static int macb_eth_probe(struct udevice *dev)
>   
>   	macb->regs = (void *)pdata->iobase;
>   
> -	macb_config = (struct macb_config *)dev_get_driver_data(dev);
> -	if (!macb_config)
> -		macb_config = &default_gem_config;
> +	macb->config = (struct macb_config *)dev_get_driver_data(dev);
> +	if (!macb->config)
> +		macb->config = &default_gem_config;
>   
> -	macb->dma_burst_length = macb_config->dma_burst_length;
>   #ifdef CONFIG_CLK
>   	ret = macb_enable_clk(dev);
>   	if (ret)
> @@ -1259,6 +1289,11 @@ static const struct macb_config sama5d4_config = {
>   	.dma_burst_length = 4,
>   };
>   
> +static const struct macb_config sifive_config = {
> +	.dma_burst_length = 16,
> +	.clk_init = macb_sifive_clk_init,
> +};
> +
>   static const struct udevice_id macb_eth_ids[] = {
>   	{ .compatible = "cdns,macb" },
>   	{ .compatible = "cdns,at91sam9260-macb" },
> @@ -1266,6 +1301,7 @@ static const struct udevice_id macb_eth_ids[] = {
>   	{ .compatible = "atmel,sama5d3-gem" },
>   	{ .compatible = "atmel,sama5d4-gem", .data = (ulong)&sama5d4_config },
>   	{ .compatible = "cdns,zynq-gem" },
> +	{ .compatible = "sifive,fu540-macb", .data = (ulong)&sifive_config },
>   	{ }
>   };
>   

Reviewed-By: Ramon Fried <rfried.dev at gmail.com>




More information about the U-Boot mailing list