[U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig
Marek Vasut
marex at denx.de
Fri Mar 1 11:40:59 UTC 2019
On 3/1/19 8:48 AM, Simon Goldschmidt wrote:
> On Thu, Feb 28, 2019 at 10:44 PM Marek Vasut <marex at denx.de> wrote:
>>
>> On 2/28/19 9:33 PM, Simon Goldschmidt wrote:
>>> Instead of fixing the SPL stack to 64 KiB in the board config header via
>>> CONFIG_SYS_SPL_MALLOC_SIZE, let's just use CONFIG_SPL_SYS_MALLOC_F_LEN
>>> in the defconfig.
>>>
>>> This also has the advandage that it removes sub-mach specific ifdefs in
>>> socfpga_common.h.
>>>
>>> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
>>
>> Can't we default these stack sizes with imply in Kconfig files instead ?
>> Then they won't have to be in the defconfigs either.
>
> I guess you mean default the *malloc* sizes, not *stack* sizes? Yes, that
> should work.
Yes, that's what I meant.
> I started this whole series because all gen5 defconfigs set the initial malloc
> size to 8 KiB, while I monitored socrates to only need a bit more than 1 KiB.
> With my reset patches, something around 1.5 KiB is still enough. So I'd
> move that to imply 2 KiB for gen5 and 64 KiB for a10 in a patch 4/4 for v2.
Sounds good!
> Regards,
> Simon
>
>>
>>> ---
>>>
>>> configs/socfpga_arria10_defconfig | 1 +
>>> include/configs/socfpga_common.h | 14 --------------
>>> 2 files changed, 1 insertion(+), 14 deletions(-)
>>>
>>> diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
>>> index f321a0ac3b..8d0479cc05 100644
>>> --- a/configs/socfpga_arria10_defconfig
>>> +++ b/configs/socfpga_arria10_defconfig
>>> @@ -2,6 +2,7 @@ CONFIG_ARM=y
>>> CONFIG_ARCH_SOCFPGA=y
>>> CONFIG_SYS_TEXT_BASE=0x01000040
>>> CONFIG_SYS_MALLOC_F_LEN=0x2000
>>> +CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
>>> CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
>>> CONFIG_SPL=y
>>> CONFIG_IDENT_STRING="socfpga_arria10"
>>> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
>>> index a3fbca0a5d..c23b34186a 100644
>>> --- a/include/configs/socfpga_common.h
>>> +++ b/include/configs/socfpga_common.h
>>> @@ -251,16 +251,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>>> #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
>>> #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
>>>
>>> -#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
>>> -/* SPL memory allocation configuration, this is for FAT implementation */
>>> -#ifndef CONFIG_SYS_SPL_MALLOC_START
>>> -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
>>> -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \
>>> - CONFIG_SYS_SPL_MALLOC_SIZE + \
>>> - CONFIG_SYS_INIT_RAM_ADDR)
>>> -#endif
>>> -#endif
>>> -
>>> /* SPL SDMMC boot support */
>>> #ifdef CONFIG_SPL_MMC_SUPPORT
>>> #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
>>> @@ -287,11 +277,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>>> /*
>>> * Stack setup
>>> */
>>> -#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>>> #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
>>> -#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
>>> -#define CONFIG_SPL_STACK CONFIG_SYS_SPL_MALLOC_START
>>> -#endif
>>>
>>> /* Extra Environment */
>>> #ifndef CONFIG_SPL_BUILD
>>>
>>
>>
>> --
>> Best regards,
>> Marek Vasut
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list