March 2019 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Fri Mar 1 00:54:44 UTC 2019
Ending: Sun Mar 31 23:54:18 UTC 2019
Messages: 3036

• [U-Boot] 'U-Boot parlella board support'   Terrance Chiang
• [U-Boot] [5/5] arm: ti: boot: Implement Android boot using DT image format   Eugeniu Rosca
• [U-Boot] [5/5] arm: ti: boot: Implement Android boot using DT image format   Eugeniu Rosca
• [U-Boot] [5/5] arm: ti: boot: Implement Android boot using DT image format   Sam Protsenko
• [U-Boot] [5/5] arm: ti: boot: Implement Android boot using DT image format   Eugeniu Rosca
• [U-Boot] [ANN] No montly community call this month   Tom Rini
• [U-Boot] [ANN] U-Boot v2019.04-rc3 released   Tom Rini
• [U-Boot] [ANN] U-Boot v2019.04-rc3 released   Peter Robinson
• [U-Boot] [ANN] U-Boot v2019.04-rc3 released   Jagan Teki
• [U-Boot] [ANN] U-Boot v2019.04-rc3 released   Peter Robinson
• [U-Boot] [ANN] U-Boot v2019.04-rc3 released   Peter Robinson
• [U-Boot] [ANN] U-Boot v2019.04-rc3 released   Lokesh Vutla
• [U-Boot] [ANN] U-Boot v2019.04-rc3 released   Jagan Teki
• [U-Boot] [ANN] U-Boot v2019.04-rc3 released   Peter Robinson
• [U-Boot] [ANN] U-Boot v2019.04-rc3 released   Jagan Teki
• [U-Boot] [ANN] U-Boot v2019.04-rc4 released   Tom Rini
• [U-Boot] [ANN] U-Boot v2019.04-rc4 released   Anatolij Gustschin
• [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
• [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
• [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails   Faiz Abbas
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails   Rizvi, Mohammad Faiz Abbas
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails   Tom Rini
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails   Akashi, Takahiro
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails   Tom Rini
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails   Akashi, Takahiro
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails   Tom Rini
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails   Faiz Abbas
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails   Faiz Abbas
• [U-Boot] [BUG] Crash when starting grub-arm.efi on BeagleBone Black   Heinrich Schuchardt
• [U-Boot] [BUG] Crash when starting grub-arm.efi on BeagleBone Black   Heinrich Schuchardt
• [U-Boot] [BUG] Crash when starting grub-arm.efi on BeagleBone Black   Heinrich Schuchardt
• [U-Boot] [BUG] efi_loader: self-tests fail on qemu-x86_defconfig when compiled with GCC 8.3 and CONFIG_CC_OPTIMIZE_FOR_SIZE=y   Heinrich Schuchardt
• [U-Boot] [BUG] efi_loader: self-tests fail on qemu-x86_defconfig when compiled with GCC 8.3 and CONFIG_CC_OPTIMIZE_FOR_SIZE=y   Bin Meng
• [U-Boot] [BUG] efi_loader: self-tests fail on qemu-x86_defconfig when compiled with GCC 8.3 and CONFIG_CC_OPTIMIZE_FOR_SIZE=y   Heinrich Schuchardt
• [U-Boot] [BUG] efiloader: cannot boot OpenBSD on armv7 via bootefi   Heinrich Schuchardt
• [U-Boot] [linux-sunxi] [PATCH 1/3] arm: sunxi: Allow per-platform DRAM ZQ configuration on sun8i   Julian Calaby
• [U-Boot] [linux-sunxi] [PATCH 1/3] arm: sunxi: Allow per-platform DRAM ZQ configuration on sun8i   Paul Kocialkowski
• [U-Boot] [linux-sunxi] [PATCH] ARM: HYP/non-sec: Don't enable ARMV7_LPAE for old sunxi kernels   Jagan Teki
• [U-Boot] [linux-sunxi] [PATCH] ARM: HYP/non-sec: Don't enable ARMV7_LPAE for old sunxi kernels   Jonathan Liu
• [U-Boot] [PATCH 0/1] board: imx7d tqma7d support   Bruno Thomsen
• [U-Boot] [PATCH 0/2] Apply correct skew values to KSZ9021 PHYs   James Byrne
• [U-Boot] [PATCH 0/2] ARM: meson: add p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH 0/2] ARM: meson: add p200 and p201 boards   Neil Armstrong
• [U-Boot] [PATCH 0/2] ARM: meson: Add support for Libretech-AC   Neil Armstrong
• [U-Boot] [PATCH 0/2] efi_loader: parameter checks in StartImage and Exit()   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] Fix broken ethernet on imx8qxp-mek   Andrejs Cainikovs
• [U-Boot] [PATCH 0/2] syscon: update syscon_regmap_lookup_by_phandle   Patrick Delaunay
• [U-Boot] [PATCH 0/2] Update pbias and IO voltage in dra7 and am57 devices   Faiz Abbas
• [U-Boot] [PATCH 0/2] Update pbias and IO voltage in dra7 and am57 devices   Faiz Abbas
• [U-Boot] [PATCH 0/3] ARM: meson: Add G12A USB Support   Neil Armstrong
• [U-Boot] [PATCH 0/3] remove dm_fdt_pre_reloc, replaced by dm_ofnode_pre_reloc   Patrick Delaunay
• [U-Boot] [PATCH 0/3] rockchip: correct SYS_SOC name for all rockchip SoCs   Kever Yang
• [U-Boot] [PATCH 0/3] thermal: Add multiple instance support   Keerthy
• [U-Boot] [PATCH 0/4] add drive strenght and slew rate support for SAM9X60   Claudiu.Beznea at microchip.com
• [U-Boot] [PATCH 0/4] Add network support for Jaguar2 SoCs   Horatiu Vultur
• [U-Boot] [PATCH 0/4] arm: socfpga: enable rtc support for the socrates board   Simon Goldschmidt
• [U-Boot] [PATCH 0/4] Let's write correct arch/*/dts/Makefile   Masahiro Yamada
• [U-Boot] [PATCH 0/4] Veyron Speedy / ASUS C201 fixes   Urja Rannikko
• [U-Boot] [PATCH 0/4] Veyron Speedy / ASUS C201 fixes   Heiko Stübner
• [U-Boot] [PATCH 0/4] Veyron Speedy / ASUS C201 fixes   Urja Rannikko
• [U-Boot] [PATCH 0/4] Veyron Speedy / ASUS C201 fixes   Heiko Stübner
• [U-Boot] [PATCH 0/4] Veyron Speedy / ASUS C201 fixes   Urja Rannikko
• [U-Boot] [PATCH 0/5] arm: k3: Fixup msmc dt node   Lokesh Vutla
• [U-Boot] [PATCH 0/5] Convert Pico i.MX7 to DM   Joris Offouga
• [U-Boot] [PATCH 0/5] Convert Pico i.MX7 to DM   Joris Offouga
• [U-Boot] [PATCH 0/5] Convert Pico i.MX7 to DM   Otavio Salvador
• [U-Boot] [PATCH 0/5] pico-imx7d: Add support for BL33 case   Jun Nie
• [U-Boot] [PATCH 0/6] - Add Ethernet support for stm32mpu   Christophe Roullier
• [U-Boot] [PATCH 0/6] ARM: meson: Add support for G12A based U200 board   Neil Armstrong
• [U-Boot] [PATCH 0/6] spl: full-featured heap cleanups   Simon Goldschmidt
• [U-Boot] [PATCH 0/8] rockchip: enable spl/tpl for px5-evb   Kever Yang
• [U-Boot] [PATCH 0/8] video/console: Fix various DM_VIDEO console issues   Andre Przywara
• [U-Boot] [PATCH 0/9] AE350 SMP support RISC-V   Andes
• [U-Boot] [PATCH 00/10] rockchip: enable board_debug_uart_init for all soc   Kever Yang
• [U-Boot] [PATCH 00/10] rockchip: enable board_debug_uart_init for all soc   Philipp Tomsich
• [U-Boot] [PATCH 00/10] tbs2910 fixes and driver model conversion   Soeren Moch
• [U-Boot] [PATCH 00/10] Update Stratix 10 SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH 00/10] Update Stratix 10 SDRAM driver   Simon Goldschmidt
• [U-Boot] [PATCH 00/10] Update Stratix 10 SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH 00/10] Update Stratix 10 SDRAM driver   Simon Goldschmidt
• [U-Boot] [PATCH 00/11] Fix Ethernet boot in am335x   Faiz Abbas
• [U-Boot] [PATCH 00/11] Fix Ethernet boot in am335x   Tom Rini
• [U-Boot] [PATCH 00/11] Fix Ethernet boot in am335x   Faiz Abbas
• [U-Boot] [PATCH 00/11] Fix Ethernet boot in am335x   Andrew F. Davis
• [U-Boot] [PATCH 00/11] Fix Ethernet boot in am335x   Andrew F. Davis
• [U-Boot] [PATCH 00/11] sound: Add sound support for Nyan   Simon Glass
• [U-Boot] [PATCH 00/12] ARM: tegra: Share cboot code with Tegra210   Thierry Reding
• [U-Boot] [PATCH 00/12] nxp: fix dhcp and efi boot support for various socs   Prabhakar Kushwaha
• [U-Boot] [PATCH 00/16] usb: convert dwc2 gadget to driver model, used in stm32mp1   Patrick Delaunay
• [U-Boot] [PATCH 00/16] usb: convert dwc2 gadget to driver model, used in stm32mp1   Jack Mitchell
• [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO   Fabio Estevam
• [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO   Fabio Estevam
• [U-Boot] [PATCH 00/18] Initial support of driver brcmnand (from kernel 4.18)   Philippe Reynes
• [U-Boot] [PATCH 01/10] board: tbs2910: Fix default environment   Soeren Moch
• [U-Boot] [PATCH 01/10] board: tbs2910: Fix default environment   Soeren Moch
• [U-Boot] [PATCH 01/10] board: tbs2910: Fix default environment   Stefano Babic
• [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Marek Vasut
• [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Marek Vasut
• [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Marek Vasut
• [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Marek Vasut
• [U-Boot] [PATCH 01/10] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH 01/11] arm: at91: Makefile: Compile lowlevel_init only when really necessary   Stefan Roese
• [U-Boot] [PATCH 01/11] net: Add priv_pdata to eth_pdata   Faiz Abbas
• [U-Boot] [PATCH 01/12] ARM: tegra: Use common header for PMU declarations   Thierry Reding
• [U-Boot] [PATCH 01/12 v2] arm: at91: Makefile: Compile lowlevel_init only when really necessary   Stefan Roese
• [U-Boot] [PATCH 01/12 v2] arm: at91: Makefile: Compile lowlevel_init only when really necessary   Heiko Schocher
• [U-Boot] [PATCH 01/14] gpio: bcm6345: switch to raw I/O functions   Philippe Reynes
• [U-Boot] [PATCH 01/14] gpio: bcm6345: switch to raw I/O functions   Daniel Schwierzeck
• [U-Boot] [PATCH 01/14] gpio: bcm6345: switch to raw I/O functions   Daniel Schwierzeck
• [U-Boot] [PATCH 01/16] gdsys: phy: Adapt fixup_88e1518() to latest Release Notes   Mario Six
• [U-Boot] [PATCH 01/16] phy: usbphyc: remove unused variable index   Patrick Delaunay
• [U-Boot] [PATCH 01/17] video: ipuv3: add DM_VIDEO support   Anatolij Gustschin
• [U-Boot] [PATCH 01/18] mtd: add get/set of_node/flash_node helpers   Philippe Reynes
• [U-Boot] [PATCH 01/34] Add target to generate initial environment   Stefano Babic
• [U-Boot] [PATCH 01/34] Add target to generate initial environment   Alex Kiernan
• [U-Boot] [PATCH 01/34] Add target to generate initial environment   Stefano Babic
• [U-Boot] [PATCH 02/10] arm: socfpga: Add sdram_s10.h to sdram.h   Ley Foon Tan
• [U-Boot] [PATCH 02/10] board: tbs2910: Remove efi loader support in defconfig to reduce u-boot size   Soeren Moch
• [U-Boot] [PATCH 02/11] arm: at91: spl_at91.c: Call spl_early_init() if OF_CONTROL is enabled   Stefan Roese
• [U-Boot] [PATCH 02/11] net: ti: cpsw: Move cpsw_phy_sel() to _probe()   Faiz Abbas
• [U-Boot] [PATCH 02/12] ARM: tegra: Guard clock code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH 02/12 v2] arm: at91: spl_at91.c: Call spl_early_init() if OF_CONTROL is enabled   Stefan Roese
• [U-Boot] [PATCH 02/12 v2] arm: at91: spl_at91.c: Call spl_early_init() if OF_CONTROL is enabled   Heiko Schocher
• [U-Boot] [PATCH 02/14] dt: bcm6838: add gpio controller   Philippe Reynes
• [U-Boot] [PATCH 02/14] dt: bcm6838: add gpio controller   Daniel Schwierzeck
• [U-Boot] [PATCH 02/16] gdsys: Post ppc4xx removal cleanup   Mario Six
• [U-Boot] [PATCH 02/16] phy: usbphyc: update xlate with DT binding   Patrick Delaunay
• [U-Boot] [PATCH 02/17] video: move ipuv3 files to subdirectory   Anatolij Gustschin
• [U-Boot] [PATCH 02/18] mtd: nand: import nand_hw_control_init()   Philippe Reynes
• [U-Boot] [PATCH 02/34] pinctrl: add imx8m driver   sbabic at denx.de
• [U-Boot] [PATCH 03/10] board: tbs2910: Add device tree   Soeren Moch
• [U-Boot] [PATCH 03/10] ddr: altera: s10: Add multiple memory banks support   Ley Foon Tan
• [U-Boot] [PATCH 03/10] ddr: altera: s10: Add multiple memory banks support   Marek Vasut
• [U-Boot] [PATCH 03/10] ddr: altera: s10: Add multiple memory banks support   Westergreen, Dalon
• [U-Boot] [PATCH 03/10] ddr: altera: s10: Add multiple memory banks support   Ley Foon Tan
• [U-Boot] [PATCH 03/10] ddr: altera: s10: Add multiple memory banks support   Marek Vasut
• [U-Boot] [PATCH 03/11] net: ti: cpsw: Convert cpsw_platform_data to a pointer in cpsw_priv   Faiz Abbas
• [U-Boot] [PATCH 03/11] serial: atmel_usart: Use fixed clock value in SPL version   Stefan Roese
• [U-Boot] [PATCH 03/11] serial: atmel_usart: Use fixed clock value in SPL version   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 03/11] serial: atmel_usart: Use fixed clock value in SPL version   Stefan Roese
• [U-Boot] [PATCH 03/11] serial: atmel_usart: Use fixed clock value in SPL version   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 03/11] serial: atmel_usart: Use fixed clock value in SPL version   Stefan Roese
• [U-Boot] [PATCH 03/12] ARM: tegra: Guard GP pad control code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH 03/12 v2] serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL   Stefan Roese
• [U-Boot] [PATCH 03/12 v2] serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 03/12 v2] serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL   Heiko Schocher
• [U-Boot] [PATCH 03/12 v2] serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL   Stefan Roese
• [U-Boot] [PATCH 03/12 v2] serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL   Stefan Roese
• [U-Boot] [PATCH 03/14] dt: bcm968380gerg: enable gpio controller   Philippe Reynes
• [U-Boot] [PATCH 03/14] dt: bcm968380gerg: enable gpio controller   Daniel Schwierzeck
• [U-Boot] [PATCH 03/16] gdsys: mpc8308: Fix style violations   Mario Six
• [U-Boot] [PATCH 03/16] phy: usbphyc: Binding update of vdda supply   Patrick Delaunay
• [U-Boot] [PATCH 03/17] imx: move CONFIG_VIDEO_IPUV3 to defconfigs   Anatolij Gustschin
• [U-Boot] [PATCH 03/18] mtd: nand: provide several helpers to do common NAND operations   Philippe Reynes
• [U-Boot] [PATCH 03/34] imx8mq_evk_defconfig: Enable pinctrl driver   sbabic at denx.de
• [U-Boot] [PATCH 04/10] arm: socfpga: Update dram_init_banksize() for Stratix10   Ley Foon Tan
• [U-Boot] [PATCH 04/10] arm: socfpga: Update dram_init_banksize() for Stratix10   Marek Vasut
• [U-Boot] [PATCH 04/10] arm: socfpga: Update dram_init_banksize() for Stratix10   Westergreen, Dalon
• [U-Boot] [PATCH 04/10] board: tbs2910: Add pinctrl driver and convert gpio to driver model   Soeren Moch
• [U-Boot] [PATCH 04/11] net: ti: cpsw-common: Isolate getting syscon address from assigning macid   Faiz Abbas
• [U-Boot] [PATCH 04/11] watchdog: Handle SPL build with watchdog disabled   Stefan Roese
• [U-Boot] [PATCH 04/11] watchdog: Handle SPL build with watchdog disabled   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 04/11] watchdog: Handle SPL build with watchdog disabled   Stefan Roese
• [U-Boot] [PATCH 04/11] watchdog: Handle SPL build with watchdog disabled   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 04/11] watchdog: Handle SPL build with watchdog disabled   Stefan Roese
• [U-Boot] [PATCH 04/11] watchdog: Handle SPL build with watchdog disabled   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 04/11] watchdog: Handle SPL build with watchdog disabled   Stefan Roese
• [U-Boot] [PATCH 04/12] ARM: tegra: Guard memory controller code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH 04/12 v2] watchdog: Handle SPL build with watchdog disabled   Stefan Roese
• [U-Boot] [PATCH 04/12 v2] watchdog: Handle SPL build with watchdog disabled   Heiko Schocher
• [U-Boot] [PATCH 04/14] bcm968380gerg: enable gpio support   Philippe Reynes
• [U-Boot] [PATCH 04/16] gdsys: mpc8308: Use shadow register for output GPIO values   Mario Six
• [U-Boot] [PATCH 04/16] phy: usbphyc: move vdda1v1 and vdda1v8 in phy_init   Patrick Delaunay
• [U-Boot] [PATCH 04/17] imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes   Anatolij Gustschin
• [U-Boot] [PATCH 04/18] arm: asm: io.h: define readX_relaxed and writeX_relaxed   Philippe Reynes
• [U-Boot] [PATCH 04/34] pico-imx6ul: Import dts files from kernel   sbabic at denx.de
• [U-Boot] [PATCH 05/10] board: altera: Stratix10: Add board_get_usable_ram_top()   Ley Foon Tan
• [U-Boot] [PATCH 05/10] board: altera: Stratix10: Add board_get_usable_ram_top()   Marek Vasut
• [U-Boot] [PATCH 05/10] board: altera: Stratix10: Add board_get_usable_ram_top()   Westergreen, Dalon
• [U-Boot] [PATCH 05/10] board: altera: Stratix10: Add board_get_usable_ram_top()   Marek Vasut
• [U-Boot] [PATCH 05/10] board: altera: Stratix10: Add board_get_usable_ram_top()   Ley Foon Tan
• [U-Boot] [PATCH 05/10] board: tbs2910: Convert usb to driver model   Soeren Moch
• [U-Boot] [PATCH 05/11] net: ti: cpsw: Block off ofdata_to_platdata with OF_CONTROL   Faiz Abbas
• [U-Boot] [PATCH 05/11] watchdog: at91sam9_wdt: Fix WDT setup in at91_wdt_start()   Stefan Roese
• [U-Boot] [PATCH 05/12] ARM: tegra: Guard pin controller code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH 05/12 v2] watchdog: at91sam9_wdt: Fix WDT setup in at91_wdt_start()   Stefan Roese
• [U-Boot] [PATCH 05/12 v2] watchdog: at91sam9_wdt: Fix WDT setup in at91_wdt_start()   Heiko Schocher
• [U-Boot] [PATCH 05/14] gpio: bcm6345: allow this driver on ARCH_BCM6858   Philippe Reynes
• [U-Boot] [PATCH 05/16] gdsys: mpc8308: Migrate SYS_FPGA{0, 1}_{BASE, SIZE} to Kconfig   Mario Six
• [U-Boot] [PATCH 05/16] phy: usbphyc: increase PLL wait timeout   Patrick Delaunay
• [U-Boot] [PATCH 05/17] apalis_imx6: convert to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 05/18] include: linux: io: define devm_ioremap on board with ioremap   Philippe Reynes
• [U-Boot] [PATCH 05/34] pico-imx6ul: Select CONFIG_OF_CONTROL   sbabic at denx.de
• [U-Boot] [PATCH 05/36] rockchip: add STIMER_BASE for all SoCs   Kever Yang
• [U-Boot] [PATCH 06/10] board: altera: Stratix10: Add ft_board_setup()   Ley Foon Tan
• [U-Boot] [PATCH 06/10] board: altera: Stratix10: Add ft_board_setup()   Marek Vasut
• [U-Boot] [PATCH 06/10] board: altera: Stratix10: Add ft_board_setup()   Ley Foon Tan
• [U-Boot] [PATCH 06/10] board: tbs2910: Convert i2c and rtc to driver model   Soeren Moch
• [U-Boot] [PATCH 06/11] arm: at91: Enable watchdog support   Stefan Roese
• [U-Boot] [PATCH 06/11] arm: at91: Enable watchdog support   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 06/11] arm: at91: Enable watchdog support   Stefan Roese
• [U-Boot] [PATCH 06/11] arm: at91: Enable watchdog support   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 06/11] net: ti: cpsw: Enable DM_FLAG_PRE_RELOC   Faiz Abbas
• [U-Boot] [PATCH 06/12] ARM: tegra: Guard powergate code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH 06/12 v2] arm: at91: Enable watchdog support   Stefan Roese
• [U-Boot] [PATCH 06/12 v2] arm: at91: Enable watchdog support   Heiko Schocher
• [U-Boot] [PATCH 06/12 v2] arm: at91: Enable watchdog support   Wolfgang Denk
• [U-Boot] [PATCH 06/12 v2] arm: at91: Enable watchdog support   Stefan Roese
• [U-Boot] [PATCH 06/14] gpio: do not include <asm/arch/gpio.h> on ARCH_BCM6858   Philippe Reynes
• [U-Boot] [PATCH 06/16] gdsys: mpc8308: Don't use manual RAM config if RAM driver is active   Mario Six
• [U-Boot] [PATCH 06/16] usb: dwc2: remove unused variable regs_otg   Patrick Delaunay
• [U-Boot] [PATCH 06/17] imx6: icore: convert to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 06/18] compat linux: import completion from linux 4.18   Philippe Reynes
• [U-Boot] [PATCH 06/34] pico-imx6ul: Convert to DM MMC   sbabic at denx.de
• [U-Boot] [PATCH 07/10] arm: socfpga: Enable OF_BOARD_SETUP for Stratix 10   Ley Foon Tan
• [U-Boot] [PATCH 07/10] ata: dwc_ahsata: Fix sector reports for large disks   Soeren Moch
• [U-Boot] [PATCH 07/11] arm: at91: arm926ejs/u-boot-spl.lds: Add _image_binary_end to SPL lds   Stefan Roese
• [U-Boot] [PATCH 07/11] board: ti: am335x: Add platdata for cpsw in SPL   Faiz Abbas
• [U-Boot] [PATCH 07/11] board: ti: am335x: Add platdata for cpsw in SPL   Tom Rini
• [U-Boot] [PATCH 07/11] board: ti: am335x: Add platdata for cpsw in SPL   Faiz Abbas
• [U-Boot] [PATCH 07/12] ARM: tegra: Fix save_boot_params() prototype   Thierry Reding
• [U-Boot] [PATCH 07/12 v2] arm: at91: arm926ejs/u-boot-spl.lds: Add _image_binary_end to SPL lds   Stefan Roese
• [U-Boot] [PATCH 07/12 v2] arm: at91: arm926ejs/u-boot-spl.lds: Add _image_binary_end to SPL lds   Heiko Schocher
• [U-Boot] [PATCH 07/14] dt: bcm6858: add gpio controller   Philippe Reynes
• [U-Boot] [PATCH 07/16] gdsys: Introduce GDSYS_LEGACY_DRIVERS   Mario Six
• [U-Boot] [PATCH 07/16] usb: dwc2: convert driver to DM_USB_GADGET   Patrick Delaunay
• [U-Boot] [PATCH 07/17] imx6: ge_bx50v3: convert to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 07/18] drivers: nand: brcmnand: add initial support   Philippe Reynes
• [U-Boot] [PATCH 07/34] pico-imx6ul: Convert to CONFIG_DM_GPIO   sbabic at denx.de
• [U-Boot] [PATCH 08/10] ata: dwc_ahsata: Add ahci driver model support   Soeren Moch
• [U-Boot] [PATCH 08/10] ata: dwc_ahsata: Add ahci driver model support   Soeren Moch
• [U-Boot] [PATCH 08/10] ata: dwc_ahsata: Add ahci driver model support   Soeren Moch
• [U-Boot] [PATCH 08/10] configs: stratix10: Change CONFIG_NR_DRAM_BANKS to 2   Ley Foon Tan
• [U-Boot] [PATCH 08/11] configs: am335x_evm: Reduce size of SPL   Faiz Abbas
• [U-Boot] [PATCH 08/11] configs: am335x_evm: Reduce size of SPL   Tom Rini
• [U-Boot] [PATCH 08/11] Makefile.spl: Move generate AT91SAM NAND image boot.bin to spl directory   Stefan Roese
• [U-Boot] [PATCH 08/11] Makefile.spl: Move generate AT91SAM NAND image boot.bin to spl directory   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 08/11] Makefile.spl: Move generate AT91SAM NAND image boot.bin to spl directory   Stefan Roese
• [U-Boot] [PATCH 08/11] Makefile.spl: Move generate AT91SAM NAND image boot.bin to spl directory   Heiko Schocher
• [U-Boot] [PATCH 08/12] ARM: tegra: Unify Tegra186 builds   Thierry Reding
• [U-Boot] [PATCH 08/12 v2] Makefile.spl: Move generated AT91SAM NAND image boot.bin to spl directory   Stefan Roese
• [U-Boot] [PATCH 08/12 v2] Makefile.spl: Move generated AT91SAM NAND image boot.bin to spl directory   Heiko Schocher
• [U-Boot] [PATCH 08/14] dt: bcm968580xref: enable gpio controller   Philippe Reynes
• [U-Boot] [PATCH 08/16] gdsys: mpc8308: Add FPGA flavor option   Mario Six
• [U-Boot] [PATCH 08/16] usb: dwc2: force reset assert before to probe the driver   Patrick Delaunay
• [U-Boot] [PATCH 08/17] colibri_imx6: convert to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 08/18] drivers: nand: brcmnand: add parameter parameter-page-big-endian   Philippe Reynes
• [U-Boot] [PATCH 08/34] pico-imx6ul: Convert to DM_PMIC   sbabic at denx.de
• [U-Boot] [PATCH 09/10] arm: socfpga: stratix10: Add cpu_has_been_warmreset()   Ley Foon Tan
• [U-Boot] [PATCH 09/10] board: tbs2910: Convert sata to ahci driver model   Soeren Moch
• [U-Boot] [PATCH 09/11] configs: am335x_evm: Add Support for SPL_ETH   Faiz Abbas
• [U-Boot] [PATCH 09/11] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary   Stefan Roese
• [U-Boot] [PATCH 09/12] ARM: tegra: Allow boards to override boot target devices   Thierry Reding
• [U-Boot] [PATCH 09/12 v2] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary   Stefan Roese
• [U-Boot] [PATCH 09/12 v2] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 09/12 v2] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary   Heiko Schocher
• [U-Boot] [PATCH 09/12 v2] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary   Stefan Roese
• [U-Boot] [PATCH 09/12 v2] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 09/12 v2] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary   Stefan Roese
• [U-Boot] [PATCH 09/14] bcm968580xref: enable gpio support   Philippe Reynes
• [U-Boot] [PATCH 09/16] gdsys: cmd_ioloop: Fix style violations   Mario Six
• [U-Boot] [PATCH 09/16] usb: dwc2: Add force-b-session-valid support   Patrick Delaunay
• [U-Boot] [PATCH 09/17] mx6sabresd: convert to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 09/18] drivers: nand: brcmnand: add an option to read the write-protect from device tree   Philippe Reynes
• [U-Boot] [PATCH 09/34] pico-imx6ul: README: Adjust the binary name after DM conversion   sbabic at denx.de
• [U-Boot] [PATCH 1/1] board: tq mba7 tqma7d 1gb emmc support.   Bruno Thomsen
• [U-Boot] [PATCH 1/1] board: tq mba7 tqma7d 1gb emmc support.   Fabio Estevam
• [U-Boot] [PATCH 1/1] cmd: usb: display bus number   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] cmd: usb: display bus number   Marek Vasut
• [U-Boot] [PATCH 1/1] doc/git-mailrc: correct entry 'agraf'   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] doc/git-mailrc: correct entry 'agraf'   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: correct parameter size in efi_allocate_pool   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: correct parameter size in efi_allocate_pool   Takahiro Akashi
• [U-Boot] [PATCH 1/1] efi_loader: correct parameter size in efi_allocate_pool   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: correct parameter size in efi_allocate_pool   Takahiro Akashi
• [U-Boot] [PATCH 1/1] efi_loader: correct parameter size in efi_allocate_pool   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: define development target in README.uefi   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: define development target in README.uefi   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: endless loop in add_strings_package()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: error handling for `efidebug boot add`   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: fix build error for freestanding.o   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: fix build error for freestanding.o   Andy Shevchenko
• [U-Boot] [PATCH 1/1] efi_loader: fix build error for freestanding.o   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: fix build error for freestanding.o   Andy Shevchenko
• [U-Boot] [PATCH 1/1] efi_loader: fix build error for freestanding.o   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: HII protocols: fix new_package_list()   AKASHI Takahiro
• [U-Boot] [PATCH 1/1] efi_loader: HII protocols: fix new_package_list()   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: HII protocols: fix new_package_list()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: HII protocols: fix new_package_list()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: HII protocols: informative error message   AKASHI Takahiro
• [U-Boot] [PATCH 1/1] efi_loader: memory leak in efi_dump_single_var()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: missing return in efi_get_next_variable_name()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: release file buffer after loading image   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: release file buffer after loading image   AKASHI Takahiro
• [U-Boot] [PATCH 1/1] efi_loader: release file buffer after loading image   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: remove superfluous check in efi_setup_loaded_image()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: sanity checks when freeing memory   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: sanity checks when freeing memory   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: TODO for the EFI file protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: update TODOs in doc/README.uefi   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: update TODOs in doc/README.uefi   AKASHI Takahiro
• [U-Boot] [PATCH 1/1] efi_loader: update TODOs in doc/README.uefi   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: update TODOs in doc/README.uefi   AKASHI Takahiro
• [U-Boot] [PATCH 1/1] efi_selftest: avoid double free in dp utilities test   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: check image_base, image_size   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: fix test_hii_string_get_string()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] env: add missing newline   Philip Molloy
• [U-Boot] [PATCH 1/1] fs: ext4: do not write on filesystem with metadata_csum feature   Sébastien Szymanski
• [U-Boot] [PATCH 1/1] hush: provide help for 'if', 'for', and 'while'   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] hush: provide help for 'if', 'for', and 'while'   Wolfgang Denk
• [U-Boot] [PATCH 1/1] hush: provide help for 'if', 'for', and 'while'   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] hush: provide help for 'if', 'for', and 'while'   Tom Rini
• [U-Boot] [PATCH 1/1] hush: provide help for 'if', 'for', and 'while'   Wolfgang Denk
• [U-Boot] [PATCH 1/1] MAINTAINERS: adjust git repository for EFI PAYLOAD   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] Set environment location to ENVL_NOWHERE with CONFIG_ENV_IS_NOWHERE.   Udit Agarwal
• [U-Boot] [PATCH 1/1] video: backlight: Parse PWM polarity cell   Stefan Mavrodiev
• [U-Boot] [PATCH 1/2] Add domain mapping for Pepperl+Fuchs   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] ARM: dts: dra7: Change pbias voltage to 3.3V   Faiz Abbas
• [U-Boot] [PATCH 1/2] ARM: dts: Import libretech-ac DT from Linux 5.0   Neil Armstrong
• [U-Boot] [PATCH 1/2] ARM: dts: meson: add p200 and p201 boards   Neil Armstrong
• [U-Boot] [PATCH 1/2] ARM: dts: meson: add p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH 1/2] ARM: dts: rmobile: Activate I2C7 on Alt   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: exynos: arndale: Remove unused CONFIG_DM_I2C_COMPAT   Krzysztof Kozlowski
• [U-Boot] [PATCH 1/2] arm: exynos: arndale: Remove unused CONFIG_DM_I2C_COMPAT   Simon Glass
• [U-Boot] [PATCH 1/2] ARM: mvebu: define board_ahci_enable() for A38x   Baruch Siach
• [U-Boot] [PATCH 1/2] ARM: mvebu: define board_ahci_enable() for A38x   Stefan Roese
• [U-Boot] [PATCH 1/2] ARM: mvebu: rename armada-385-amc.dts to armada-385-db-88f6820-amc.dts   Chris Packham
• [U-Boot] [PATCH 1/2] ARM: socfpga: Pull PL310 clearing into common code   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: socfpga: Pull PL310 clearing into common code   Dinh Nguyen
• [U-Boot] [PATCH 1/2] ARM: socfpga: Pull PL310 clearing into common code   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: tegra: Fix mux type for disp1 and disp2 clocks on Tegra210   Thierry Reding
• [U-Boot] [PATCH 1/2] armv8: fsl-layerscape: add missing sec jr base address defines   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH 1/2] armv8: fsl-layerscape: add missing sec jr base address defines   Horia Geanta
• [U-Boot] [PATCH 1/2] board: pm9261: Convert to CONFIG_DM_USB and CONFIG_DM_VIDEO   Ilko Iliev
• [U-Boot] [PATCH 1/2] cmd: binop: Use new environment api   Mario Six
• [U-Boot] [PATCH 1/2] common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled   Abel Vesa
• [U-Boot] [PATCH 1/2] common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled   Marek Vasut
• [U-Boot] [PATCH 1/2] Convert CONFIG_NAND to Kconfig   Adam Ford
• [U-Boot] [PATCH 1/2] ddr: socfpga: Clean up EMIF reset   Marek Vasut
• [U-Boot] [PATCH 1/2] ddr: socfpga: Fix IO in Arria10 DDR driver   Marek Vasut
• [U-Boot] [PATCH 1/2] ddr: socfpga: Fix IO in Arria10 DDR driver   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] ddr: socfpga: Fix IO in Arria10 DDR driver   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] efi_loader: rearrange boottime service functions   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] fastboot: getvar_partition_{type, size}: Sanitize arguments   Eugeniu Rosca
• [U-Boot] [PATCH 1/2] fastboot: getvar_partition_{type, size}: Sanitize arguments   Eugeniu Rosca
• [U-Boot] [PATCH 1/2] gdsys_rxaui_ctrl: Return old state   Mario Six
• [U-Boot] [PATCH 1/2] i2c: i2c_cdns: Fix clearing of all interrupts   Michal Simek
• [U-Boot] [PATCH 1/2] i2c: i2c_cdns: Fix clearing of all interrupts   Heiko Schocher
• [U-Boot] [PATCH 1/2] i2c: ihs: Get rid of fpgamap   Mario Six
• [U-Boot] [PATCH 1/2] imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to Kconfig   Peng Fan
• [U-Boot] [PATCH 1/2] lib: fdt: Allow enabling both LZO and GZIP DT compression   Marek Vasut
• [U-Boot] [PATCH 1/2] Makefile: Add target to generate hex output for combined spl and dtb   Dalon Westergreen
• [U-Boot] [PATCH 1/2] Makefile: Add target to generate hex output for combined spl and dtb   Simon Glass
• [U-Boot] [PATCH 1/2] mtd: ubi debug: Remove the pid print from ubi_assert   Heiko Schocher
• [U-Boot] [PATCH 1/2] mv_ddr: ddr3: fix tRAS timimg parameter   Stefan Roese
• [U-Boot] [PATCH 1/2] net: dm: fec: Support phy-reset-post-delay property   Andrejs Cainikovs
• [U-Boot] [PATCH 1/2] net: dm: fec: Support phy-reset-post-delay property   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] net: dm: fec: Support phy-reset-post-delay property   Stefano Babic
• [U-Boot] [PATCH 1/2] net: dm: fec: Support phy-reset-post-delay property   Joe Hershberger
• [U-Boot] [PATCH 1/2] net: dm: fec: Support phy-reset-post-delay property   Lukasz Majewski
• [U-Boot] [PATCH 1/2] net: phy: micrel: Use correct skew values on KSZ9021   James Byrne
• [U-Boot] [PATCH 1/2] net: phy: micrel: Use correct skew values on KSZ9021   Joe Hershberger
• [U-Boot] [PATCH 1/2] pci: Add boundary check for hose->regions   Thierry Reding
• [U-Boot] [PATCH 1/2] pci: Add boundary check for hose->regions   Simon Glass
• [U-Boot] [PATCH 1/2] phy: rcar: Add R-Car Gen3 PHY driver   Eugeniu Rosca
• [U-Boot] [PATCH 1/2] phy: rcar: Add R-Car Gen3 PHY driver   Marek Vasut
• [U-Boot] [PATCH 1/2] phy: rcar: Add R-Car Gen3 PHY driver   Eugeniu Rosca
• [U-Boot] [PATCH 1/2] phy: rcar: Add R-Car Gen3 PHY driver   Marek Vasut
• [U-Boot] [PATCH 1/2] serial: add skipping init option   Jun Nie
• [U-Boot] [PATCH 1/2] serial: add skipping init option   Simon Glass
• [U-Boot] [PATCH 1/2] serial: add skipping init option   Jun Nie
• [U-Boot] [PATCH 1/2] serial: add skipping init option   Simon Glass
• [U-Boot] [PATCH 1/2] serial: add skipping init option   Lukasz Majewski
• [U-Boot] [PATCH 1/2] serial: add skipping init option   Jun Nie
• [U-Boot] [PATCH 1/2] serial: add skipping init option   Simon Glass
• [U-Boot] [PATCH 1/2] serial: add skipping init option   Simon Glass
• [U-Boot] [PATCH 1/2] spl: ymodem: Terminate YModem session on error   Marek Vasut
• [U-Boot] [PATCH 1/2] syscon: update syscon_regmap_lookup_by_phandle   Patrick Delaunay
• [U-Boot] [PATCH 1/2] syscon: update syscon_regmap_lookup_by_phandle   Simon Glass
• [U-Boot] [PATCH 1/3] ag7xxx: add initial support for s17   rosysong at rosinson.com
• [U-Boot] [PATCH 1/3] arm64: zynqmp: Add spi-flash compatible string to flash node   Michal Simek
• [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Ley Foon Tan
• [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Marek Vasut
• [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Oleksandr
• [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Patrick DELAUNAY
• [U-Boot] [PATCH 1/3] arm: sunxi: Allow per-platform DRAM ZQ configuration on sun8i   Paul Kocialkowski
• [U-Boot] [PATCH 1/3] armv8: ls1028a: Add NXP LS1028A SoC support   Bhaskar Upadhaya
• [U-Boot] [PATCH 1/3] armv8: ls1028a: Add NXP LS1028A SoC support   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3] clk: at91: replace dm_fdt_pre_reloc by dm_ofnode_pre_reloc   Patrick Delaunay
• [U-Boot] [PATCH 1/3] clk: at91: replace dm_fdt_pre_reloc by dm_ofnode_pre_reloc   Simon Glass
• [U-Boot] [PATCH 1/3] clk: renesas: Fix SDH clock divider decoding on Gen2   Marek Vasut
• [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree   Fabio Estevam
• [U-Boot] [PATCH 1/3] Move CONFIG_FSL_ESDHC to defconfig   Y.b. Lu
• [U-Boot] [PATCH 1/3] Move CONFIG_FSL_ESDHC to defconfig   Stefano Babic
• [U-Boot] [PATCH 1/3] Move CONFIG_FSL_ESDHC to defconfig   Y.b. Lu
• [U-Boot] [PATCH 1/3] net: eth-uclass: Write MAC address to hardware after probe   Thierry Reding
• [U-Boot] [PATCH 1/3] rockchip: arm: use 'arch-rockchip' for common header   Kever Yang
• [U-Boot] [PATCH 1/3] rockchip: arm: use 'arch-rockchip' for common header   Philipp Tomsich
• [U-Boot] [PATCH 1/3] spl: Rename SPL_LEGACY_IMAGE_SUPPORT to SPL_IMAGE_FORMAT_LEGACY   Tom Rini
• [U-Boot] [PATCH 1/3] thermal: Add multiple instance support   Keerthy
• [U-Boot] [PATCH 1/3] thermal: Add multiple instance support   Simon Glass
• [U-Boot] [PATCH 1/3] thermal: Add multiple instance support   keerthy
• [U-Boot] [PATCH 1/3] thermal: Add multiple instance support   Simon Glass
• [U-Boot] [PATCH 1/3] usb: dwc3: Add Meson G12A USB Glue   Neil Armstrong
• [U-Boot] [PATCH 1/3] usb: dwc3: Add Meson G12A USB Glue   Marek Vasut
• [U-Boot] [PATCH 1/3] usb: dwc3: Add Meson G12A USB Glue   Neil Armstrong
• [U-Boot] [PATCH 1/3] usb: dwc3: Add Meson G12A USB Glue   Marek Vasut
• [U-Boot] [PATCH 1/3] vsprintf: Support phys_addr_t specifier unconditionally   Thierry Reding
• [U-Boot] [PATCH 1/3] vsprintf: Support phys_addr_t specifier unconditionally   Simon Glass
• [U-Boot] [PATCH 1/4] arm: exynos: arndale: Replace Chander Kashyap inactive maintainer   Minkyu Kang
• [U-Boot] [PATCH 1/4] ARM: fix arch/arm/dts/Makefile   Masahiro Yamada
• [U-Boot] [PATCH 1/4] ARM: fix arch/arm/dts/Makefile   Chris Packham
• [U-Boot] [PATCH 1/4] ARM: rmobile: alt: Remove R8A7794_ETHERNET_B   Marek Vasut
• [U-Boot] [PATCH 1/4] ARM: socfpga: Disable D cache in SPL   Marek Vasut
• [U-Boot] [PATCH 1/4] ARM: socfpga: Disable D cache in SPL   Chee, Tien Fong
• [U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Peng Ma
• [U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Stefan Roese
• [U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Peng Ma
• [U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Stefan Roese
• [U-Boot] [PATCH 1/4] i2c: designware: fix reset handling on socfpga gen5   Simon Goldschmidt
• [U-Boot] [PATCH 1/4] i2c: designware: fix reset handling on socfpga gen5   Heiko Schocher
• [U-Boot] [PATCH 1/4] lib: fdt: Split fdtdec_setup_mem_size_base()   Marek Vasut
• [U-Boot] [PATCH 1/4] lib: fdt: Split fdtdec_setup_mem_size_base()   Simon Glass
• [U-Boot] [PATCH 1/4] net: Add MSCC Jaguar2 network driver.   Horatiu Vultur
• [U-Boot] [PATCH 1/4] pinctrl: at91: add option to use drive strength bits   Claudiu.Beznea at microchip.com
• [U-Boot] [PATCH 1/4] pinctrl: exit pinconfig_post_bind if there are no subnodes   Urja Rannikko
• [U-Boot] [PATCH 1/4] pinctrl: exit pinconfig_post_bind if there are no subnodes   Simon Glass
• [U-Boot] [PATCH 1/4] rockchip: dts: rk3399: Sync rk3399-opp from Linux   Jagan Teki
• [U-Boot] [PATCH 1/4] sata: sata_mv: Add DM support to enable CONFIG_BLK usage   Stefan Roese
• [U-Boot] [PATCH 1/4] x86: Make sure i8254 is setup correctly before generating beeps   Simon Glass
• [U-Boot] [PATCH 1/4] x86: Make sure i8254 is setup correctly before generating beeps   Bin Meng
• [U-Boot] [PATCH 1/5] Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM   Joris Offouga
• [U-Boot] [PATCH 1/5] Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM   Fabio Estevam
• [U-Boot] [PATCH 1/5] ARM: rmobile: Add dedicated R8A77965 SoC support   Marek Vasut
• [U-Boot] [PATCH 1/5] firmware: Add support for querying msmc memory   Lokesh Vutla
• [U-Boot] [PATCH 1/5] mx7_common: Share configs to skip low level init   Jun Nie
• [U-Boot] [PATCH 1/5] test/py: mmc: Factor out device selection   Marek Vasut
• [U-Boot] [PATCH 1/5] test/py: mmc: Factor out device selection   Simon Glass
• [U-Boot] [PATCH 1/6] fdt: boot_get_fdt: remove redundant zeroing out   Eugeniu Rosca
• [U-Boot] [PATCH 1/6] fdtdec: Add cpu_to_fdt_{addr,size}() macros   Thierry Reding
• [U-Boot] [PATCH 1/6] fdtdec: Add cpu_to_fdt_{addr, size}() macros   Simon Glass
• [U-Boot] [PATCH 1/6] i2c: rcar_i2c: Fix u32 cast warnings   Ismael Luceno Cortes
• [U-Boot] [PATCH 1/6] i2c: rcar_i2c: Fix u32 cast warnings   Marek Vasut
• [U-Boot] [PATCH 1/6] i2c: rcar_i2c: Fix u32 cast warnings   Ismael Luceno Cortes
• [U-Boot] [PATCH 1/6] i2c: rcar_i2c: Fix u32 cast warnings   Marek Vasut
• [U-Boot] [PATCH 1/6] pico-imx6ul: Import dts files from kernel   Otavio Salvador
• [U-Boot] [PATCH 1/6] pico-imx6ul: Import dts files from kernel   Stefano Babic
• [U-Boot] [PATCH 1/6] pinctrl: meson: add g12a support   Neil Armstrong
• [U-Boot] [PATCH 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH 1/6] spl: add Kconfig option to clear bss early   Stefan Roese
• [U-Boot] [PATCH 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH 1/6] stm32mp1: clk: use the correct identifier for ethck   Christophe Roullier
• [U-Boot] [PATCH 1/8] led: add initial support for bcm6858   Philippe Reynes
• [U-Boot] [PATCH 1/8] led: add initial support for bcm6858   Daniel Schwierzeck
• [U-Boot] [PATCH 1/8] rockchip: rk3368: support UART2/4 in board_debug_uart_init()   Kever Yang
• [U-Boot] [PATCH 1/8] video/console: Fix DM_VIDEO font glyph array indexing   Andre Przywara
• [U-Boot] [PATCH 1/8] video/console: Fix DM_VIDEO font glyph array indexing   Simon Glass
• [U-Boot] [PATCH 1/9] pinctrl: renesas: Fix r8a779{5, 6, 65} assign to GP7_03/02 of GPSR7   Marek Vasut
• [U-Boot] [PATCH 1/9] riscv: ax25: Create a simple-bus driver for the soc node   Andes
• [U-Boot] [PATCH 1/9] riscv: ax25: Create a simple-bus driver for the soc node   Bin Meng
• [U-Boot] [PATCH 1/9] riscv: ax25: Create a simple-bus driver for the soc node   Rick Chen
• [U-Boot] [PATCH 1/9] riscv: ax25: Create a simple-bus driver for the soc node   Bin Meng
• [U-Boot] [PATCH 1/9] riscv: ax25: Create a simple-bus driver for the soc node   Rick Chen
• [U-Boot] [PATCH 1/9] riscv: ax25: Create a simple-bus driver for the soc node   Bin Meng
• [U-Boot] [PATCH 1/9] riscv: ax25: Create a simple-bus driver for the soc node   Rick Chen
• [U-Boot] [PATCH 1/9] riscv: ax25: Create a simple-bus driver for the soc node   Bin Meng
• [U-Boot] [PATCH 10/10] board: tbs2910: Convert mmc to driver model   Soeren Moch
• [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing   Ley Foon Tan
• [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing   Marek Vasut
• [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing   Ley Foon Tan
• [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing   Marek Vasut
• [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing   Ley Foon Tan
• [U-Boot] [PATCH 10/10] ddr: altera: Stratix10: Add ECC memory scrubbing   Marek Vasut
• [U-Boot] [PATCH 10/11] arm: at91: siemens: Add support to generate combined SPL+U-Boot image   Stefan Roese
• [U-Boot] [PATCH 10/11] configs: am335x_evm: Update VCI String   Faiz Abbas
• [U-Boot] [PATCH 10/11] configs: am335x_evm: Update VCI String   Tom Rini
• [U-Boot] [PATCH 10/12] ARM: tegra: Implement cboot_save_boot_params() in C   Thierry Reding
• [U-Boot] [PATCH 10/12 v2] arm: at91: siemens: Add support to generate combined SPL+U-Boot image   Stefan Roese
• [U-Boot] [PATCH 10/12 v2] arm: at91: siemens: Add support to generate combined SPL+U-Boot image   Heiko Schocher
• [U-Boot] [PATCH 10/14] gpio: bcm6345: allow this driver on ARCH_BCM63158   Philippe Reynes
• [U-Boot] [PATCH 10/16] gdsys: cmd_ioloop: Introduce commenting enum   Mario Six
• [U-Boot] [PATCH 10/16] usb: dwc2: Add function for session B check   Patrick Delaunay
• [U-Boot] [PATCH 10/17] mx6sabreauto: convert to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 10/18] dt: bcm6838: add nand controller   Philippe Reynes
• [U-Boot] [PATCH 10/34] ARM: liteboard: move towards driver model and device-tree boot   sbabic at denx.de
• [U-Boot] [PATCH 11/11] arm: at91: Add gardena-gateway-at91sam support   Stefan Roese
• [U-Boot] [PATCH 11/11] board: ti: am335x: Remove non DM_ETH code   Faiz Abbas
• [U-Boot] [PATCH 11/12] ARM: tegra: Support TZ-only access to PMC   Thierry Reding
• [U-Boot] [PATCH 11/12 v2] arm: at91: at91sam9x5.dtsi: Add watchdog handle   Stefan Roese
• [U-Boot] [PATCH 11/12 v2] arm: at91: at91sam9x5.dtsi: Add watchdog handle   Heiko Schocher
• [U-Boot] [PATCH 11/14] gpio: do not include <asm/arch/gpio.h> on ARCH_BCM63158   Philippe Reynes
• [U-Boot] [PATCH 11/16] gdsys: cmd_ioloop: Make DM compatible   Mario Six
• [U-Boot] [PATCH 11/16] usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register   Patrick Delaunay
• [U-Boot] [PATCH 11/17] imx6: wandboard: add device tree   Anatolij Gustschin
• [U-Boot] [PATCH 11/18] dt: bcm968380gerg: enable nand controller   Philippe Reynes
• [U-Boot] [PATCH 11/34] ARM: liteboard: use random ethaddr   sbabic at denx.de
• [U-Boot] [PATCH 12/12] ARM: tegra: Implement cboot_get_ethaddr()   Thierry Reding
• [U-Boot] [PATCH 12/12 v2] arm: at91: Add gardena-gateway-at91sam support   Stefan Roese
• [U-Boot] [PATCH 12/12 v2] arm: at91: Add gardena-gateway-at91sam support   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 12/12 v2] arm: at91: Add gardena-gateway-at91sam support   Stefan Roese
• [U-Boot] [PATCH 12/12 v2] arm: at91: Add gardena-gateway-at91sam support   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 12/12 v2] arm: at91: Add gardena-gateway-at91sam support   Stefan Roese
• [U-Boot] [PATCH 12/12 v2] arm: at91: Add gardena-gateway-at91sam support   Heiko Schocher
• [U-Boot] [PATCH 12/14] dt: bcm63158: add gpio controller   Philippe Reynes
• [U-Boot] [PATCH 12/16] gdsys: ioep-fpga: Switch to gazerbeam-style reporting   Mario Six
• [U-Boot] [PATCH 12/16] usb: dwc2_udc_otg: Add tx_fifo_sz array support   Patrick Delaunay
• [U-Boot] [PATCH 12/17] imx6: wandboard: convert to DM_GPIO and enable pinctrl driver   Anatolij Gustschin
• [U-Boot] [PATCH 12/18] bcm968380gerg: add nand support   Philippe Reynes
• [U-Boot] [PATCH 12/34] imx: ventana: hexdump invalid EEPROM data   sbabic at denx.de
• [U-Boot] [PATCH 13/13] bootcount: i2c: Delay after writing   Stefano Babic
• [U-Boot] [PATCH 13/13] bootcount: i2c: Delay after writing   Heiko Schocher
• [U-Boot] [PATCH 13/13] bootcount: i2c: Delay after writing   Stefano Babic
• [U-Boot] [PATCH 13/14] dt: bcm963158: enable gpio controller   Philippe Reynes
• [U-Boot] [PATCH 13/16] board: gazerbeam: Fix SC detection   Mario Six
• [U-Boot] [PATCH 13/16] usb: dwc2: add support for STM32MP1   Patrick Delaunay
• [U-Boot] [PATCH 13/17] imx6: wandboard: convert to DM_USB   Anatolij Gustschin
• [U-Boot] [PATCH 13/18] dt: bcm6858: add nand controller   Philippe Reynes
• [U-Boot] [PATCH 13/34] imx: ventana: added support for 16bit 8Gb density (1GiB) DRAM   sbabic at denx.de
• [U-Boot] [PATCH 14/14] bcm963158: enable gpio support   Philippe Reynes
• [U-Boot] [PATCH 14/16] gazerbeam: Import Linux DT   Mario Six
• [U-Boot] [PATCH 14/16] stm32mp1: remove CONFIG_USB_DWC2, HOST support for USBO   Patrick Delaunay
• [U-Boot] [PATCH 14/17] imx6: wandboard: convert to DM_VIDEO   Anatolij Gustschin
• [U-Boot] [PATCH 14/18] dt: bcm968580xref: enable nand controller   Philippe Reynes
• [U-Boot] [PATCH 14/34] warp7: README: Adjust the binary name after DM conversion   sbabic at denx.de
• [U-Boot] [PATCH 15/16] gazerbeam: Add u-boot specific dts include file   Mario Six
• [U-Boot] [PATCH 15/16] stm32mp1: migrate USBOTG device to driver model   Patrick Delaunay
• [U-Boot] [PATCH 15/17] imx6: wandboard: convert to DM_PMIC   Anatolij Gustschin
• [U-Boot] [PATCH 15/18] bcm968580xref: add nand support   Philippe Reynes
• [U-Boot] [PATCH 15/34] warp7: Remove unneeded headers after DM conversion   sbabic at denx.de
• [U-Boot] [PATCH 16/16] mpc83xx: Add gazerbeam board   Mario Six
• [U-Boot] [PATCH 16/16] stm32mp1: add stusb1600 support for DK1 and DK2 board   Patrick Delaunay
• [U-Boot] [PATCH 16/17] imx6: wandboard: convert to DM_I2C   Anatolij Gustschin
• [U-Boot] [PATCH 16/18] dt: bcm63158: add nand controller   Philippe Reynes
• [U-Boot] [PATCH 16/34] mx6ul_14x14_evk: Simplify the PMIC register writes   sbabic at denx.de
• [U-Boot] [PATCH 17/17] imx6: wandboard: convert to DM_MMC   Anatolij Gustschin
• [U-Boot] [PATCH 17/18] dt: bcm963158: enable nand controller   Philippe Reynes
• [U-Boot] [PATCH 17/34] warp7: Fix the write to the LDOGCTL PMIC register   sbabic at denx.de
• [U-Boot] [PATCH 18/18] bcm963158: add nand support   Philippe Reynes
• [U-Boot] [PATCH 18/34] imx8mq_evk/README: add missing firmware extract step   sbabic at denx.de
• [U-Boot] [PATCH 19/34] imx8mq_evk/README: fix DDR training firmware path   sbabic at denx.de
• [U-Boot] [PATCH 2/2] ARM: board: meson: add p200 and p201 boards   Neil Armstrong
• [U-Boot] [PATCH 2/2] arm: exynos: arndale: Remove unused CONFIG_POWER and CONFIG_POWER_I2C   Krzysztof Kozlowski
• [U-Boot] [PATCH 2/2] arm: exynos: arndale: Remove unused CONFIG_POWER and CONFIG_POWER_I2C   Simon Glass
• [U-Boot] [PATCH 2/2] ARM: mvebu: sync db-88f6820-amc.dts with Linux v5.0   Chris Packham
• [U-Boot] [PATCH 2/2] ARM: rmobile: alt: Fix I2C bus number   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: socfpga: stratix10: Remove CONFIG_OF_EMBED   Dalon Westergreen
• [U-Boot] [PATCH 2/2] ARM: socfpga: stratix10: Remove CONFIG_OF_EMBED   Simon Glass
• [U-Boot] [PATCH 2/2] ARM: tegra: Remove disp1 clock initialization on Tegra210   Thierry Reding
• [U-Boot] [PATCH 2/2] armv8: ls1088a: add icid setup for platform devices   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH 2/2] armv8: ls1088a: add icid setup for platform devices   Horia Geanta
• [U-Boot] [PATCH 2/2] armv8: ls1088a: add icid setup for platform devices   Laurentiu Tudor
• [U-Boot] [PATCH 2/2] armv8: ls1088a: add icid setup for platform devices   Laurentiu Tudor
• [U-Boot] [PATCH 2/2] armv8: ls1088a: add icid setup for platform devices   Laurentiu Tudor
• [U-Boot] [PATCH 2/2] armv8: ls1088a: add icid setup for platform devices   Horia Geanta
• [U-Boot] [PATCH 2/2] armv8: ls1088a: add icid setup for platform devices   Laurentiu Tudor
• [U-Boot] [PATCH 2/2] ata: ahci_mvebu: add support for Armada 38x   Baruch Siach
• [U-Boot] [PATCH 2/2] ata: ahci_mvebu: add support for Armada 38x   Stefan Roese
• [U-Boot] [PATCH 2/2] board: pm9263: Convert to CONFIG_DM_USB and CONFIG_DM_VIDEO   Ilko Iliev
• [U-Boot] [PATCH 2/2] board: stm32f746-disco: Get MII/RMII phy_mode from DT   Joe Hershberger
• [U-Boot] [PATCH 2/2] boards: Amlogic: Add support for Libretech-AC   Neil Armstrong
• [U-Boot] [PATCH 2/2] cmd: binop: Use hex2bin   Mario Six
• [U-Boot] [PATCH 2/2] Convert CONFIG_NAND_FSL_ELBC et al to Kconfig   Adam Ford
• [U-Boot] [PATCH 2/2] ddr: socfpga: Clean up ddr_setup()   Marek Vasut
• [U-Boot] [PATCH 2/2] ddr: socfpga: Fix newline in debug print on A10   Marek Vasut
• [U-Boot] [PATCH 2/2] ddr: socfpga: Fix newline in debug print on A10   Simon Goldschmidt
• [U-Boot] [PATCH 2/2] ddr: socfpga: Fix newline in debug print on A10   Chee, Tien Fong
• [U-Boot] [PATCH 2/2] dts: imx8qxp-mek: Add PHY post reset delay   Andrejs Cainikovs
• [U-Boot] [PATCH 2/2] dts: imx8qxp-mek: Add PHY post reset delay   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] dts: imx8qxp-mek: Add PHY post reset delay   Stefano Babic
• [U-Boot] [PATCH 2/2] dts: imx8qxp-mek: Add PHY post reset delay   Joe Hershberger
• [U-Boot] [PATCH 2/2] efi_loader: parameter checks in StartImage and Exit()   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: parameter checks in StartImage and Exit()   Alexander Graf
• [U-Boot] [PATCH 2/2] efi_loader: parameter checks in StartImage and Exit()   Alexander Graf
• [U-Boot] [PATCH 2/2] fastboot: getvar_partition_type: Return 'raw' when FS-unaware   Eugeniu Rosca
• [U-Boot] [PATCH 2/2] fastboot: getvar_partition_type: Return 'raw' when FS-unaware   Eugeniu Rosca
• [U-Boot] [PATCH 2/2] fastboot: getvar_partition_type: Return 'raw' when FS-unaware   Eugeniu Rosca
• [U-Boot] [PATCH 2/2] gdsys_rxaui_ctrl: Use new regmap interface   Mario Six
• [U-Boot] [PATCH 2/2] i2c: i2c_cdns: Add support for handling arbitration lost   Michal Simek
• [U-Boot] [PATCH 2/2] i2c: i2c_cdns: Add support for handling arbitration lost   Heiko Schocher
• [U-Boot] [PATCH 2/2] i2c: ihs: Improve error handling   Mario Six
• [U-Boot] [PATCH 2/2] imx8mq_evk: Add myself as a co-maintainer   Peng Fan
• [U-Boot] [PATCH 2/2] imx: serial_mxc: skip uart initilization   Jun Nie
• [U-Boot] [PATCH 2/2] lib: fdt: Allow LZO and GZIP DT compression in U-Boot   Marek Vasut
• [U-Boot] [PATCH 2/2] mc : Reduce MC memory size to 128M   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] mc : Reduce MC memory size to 128M   Joe Hershberger
• [U-Boot] [PATCH 2/2] mc : Reduce MC memory size to 128M   Joe Hershberger
• [U-Boot] [PATCH 2/2] mc : Reduce MC memory size to 128M   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2] mmc: omap_hsmmc: Set 3.3V for IO voltage   Faiz Abbas
• [U-Boot] [PATCH 2/2] mtd: ubi, ubifs debug: Use pr_debug instead of pr_crit   Heiko Schocher
• [U-Boot] [PATCH 2/2] mv_ddr: ddr3: only use active chip-selects when tuning ODT   Baruch Siach
• [U-Boot] [PATCH 2/2] mv_ddr: ddr3: only use active chip-selects when tuning ODT   Stefan Roese
• [U-Boot] [PATCH 2/2] net: phy: micrel: Find Micrel PHY node correctly   James Byrne
• [U-Boot] [PATCH 2/2] net: phy: micrel: Find Micrel PHY node correctly   Joe Hershberger
• [U-Boot] [PATCH 2/2] pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS   Thierry Reding
• [U-Boot] [PATCH 2/2] pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS   Simon Glass
• [U-Boot] [PATCH 2/2] spl: ymodem: Move GZ handling out of YModem session   Marek Vasut
• [U-Boot] [PATCH 2/2] sysreset: use syscon_regmap_lookup_by_phandle   Patrick Delaunay
• [U-Boot] [PATCH 2/2] tools: fit_image: Add the loadable property to configs   Abel Vesa
• [U-Boot] [PATCH 2/2] tools: fit_image: Add the loadable property to configs   Simon Glass
• [U-Boot] [PATCH 2/3] arm64: zynqmp: Define label for flash node   Michal Simek
• [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig   Marek Vasut
• [U-Boot] [PATCH 2/3] arm: sunxi: Set the default DRAM ZQ value to 3881979 on H3/H5   Paul Kocialkowski
• [U-Boot] [PATCH 2/3] armv8: ls1028ardb: Add support for LS1028ARDB platform   Bhaskar Upadhaya
• [U-Boot] [PATCH 2/3] armv8: ls1028ardb: Add support for LS1028ARDB platform   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3] clk: renesas: Fix swapped div and mul in debug output on Gen2   Marek Vasut
• [U-Boot] [PATCH 2/3] clk: socfpga: replace dm_fdt_pre_reloc by dm_ofnode_pre_reloc   Patrick Delaunay
• [U-Boot] [PATCH 2/3] clk: socfpga: replace dm_fdt_pre_reloc by dm_ofnode_pre_reloc   Simon Glass
• [U-Boot] [PATCH 2/3] cmd: thermal: Add command line interface to read out temperatures   Keerthy
• [U-Boot] [PATCH 2/3] cmd: thermal: Add command line interface to read out temperatures   Simon Glass
• [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path   Fabio Estevam
• [U-Boot] [PATCH 2/3] mmc: split fsl_esdhc driver for i.MX   Lukasz Majewski
• [U-Boot] [PATCH 2/3] mmc: split fsl_esdhc driver for i.MX   Stefano Babic
• [U-Boot] [PATCH 2/3] mmc: split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [PATCH 2/3] net: rtl8169: Implement ->hwaddr_write() callback   Thierry Reding
• [U-Boot] [PATCH 2/3] phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers   Neil Armstrong
• [U-Boot] [PATCH 2/3] rockchip: use 'arch-rockchip' as header file path   Kever Yang
• [U-Boot] [PATCH 2/3] rockchip: use 'arch-rockchip' as header file path   Simon Glass
• [U-Boot] [PATCH 2/3] sandbox: Use correct phys_{addr, size}_t for PHYS_64BIT=y   Thierry Reding
• [U-Boot] [PATCH 2/3] Switch checks of CONFIG_IMAGE_FORMAT_LEGACY to CONFIG_IS_ENABLED   Tom Rini
• [U-Boot] [PATCH 2/4] arm: mvebu: theadorable_debug_defconfig: Enable CONFIG_BLK   Stefan Roese
• [U-Boot] [PATCH 2/4] ARM: rmobile: alt: Remove CLK2MHZ macro   Marek Vasut
• [U-Boot] [PATCH 2/4] ARM: socfpga: Drop CONFIG_SYS_NAND_BAD_BLOCK_POS   Marek Vasut
• [U-Boot] [PATCH 2/4] ARM: socfpga: Drop CONFIG_SYS_NAND_BAD_BLOCK_POS   Chee, Tien Fong
• [U-Boot] [PATCH 2/4] board: mscc: jr2: Update MSCC Jaguar2 boards   Horatiu Vultur
• [U-Boot] [PATCH 2/4] board: mscc: jr2: Update MSCC Jaguar2 boards   Daniel Schwierzeck
• [U-Boot] [PATCH 2/4] board: mscc: jr2: Update MSCC Jaguar2 boards   Horatiu Vultur
• [U-Boot] [PATCH 2/4] board: mscc: jr2: Update MSCC Jaguar2 boards   Daniel Schwierzeck
• [U-Boot] [PATCH 2/4] board: mscc: jr2: Update MSCC Jaguar2 boards   Horatiu Vultur
• [U-Boot] [PATCH 2/4] configs: odroid_xu3: Use consistent syntax for #include   Minkyu Kang
• [U-Boot] [PATCH 2/4] lib: fdt: Split fdtdec_setup_memory_banksize()   Marek Vasut
• [U-Boot] [PATCH 2/4] lib: fdt: Split fdtdec_setup_memory_banksize()   Simon Glass
• [U-Boot] [PATCH 2/4] pinctrl: at91: add drive strength support for SAM9X60   Claudiu.Beznea at microchip.com
• [U-Boot] [PATCH 2/4] powerpc: fix arch/powerpc/dts/Makefile   Masahiro Yamada
• [U-Boot] [PATCH 2/4] ppc: t2080qds: add sata node   Peng Ma
• [U-Boot] [PATCH 2/4] rk3288-board: remove pinctrl call for debug uart   Urja Rannikko
• [U-Boot] [PATCH 2/4] rk3288-board: remove pinctrl call for debug uart   Simon Glass
• [U-Boot] [PATCH 2/4] rk3288-board: remove pinctrl call for debug uart   Urja Rannikko
• [U-Boot] [PATCH 2/4] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi   Jagan Teki
• [U-Boot] [PATCH 2/4] rtc: m41t62: add compatible for m41t82   Simon Goldschmidt
• [U-Boot] [PATCH 2/4] rtc: m41t62: add compatible for m41t82   Stefan Roese
• [U-Boot] [PATCH 2/4] rtc: m41t62: add compatible for m41t82   Simon Goldschmidt
• [U-Boot] [PATCH 2/4] x86: Add a dtsi file for the pc speaker   Simon Glass
• [U-Boot] [PATCH 2/4] x86: Add a dtsi file for the pc speaker   Bin Meng
• [U-Boot] [PATCH 2/5] arm: k3: Add a wrapper to get tisci handle   Lokesh Vutla
• [U-Boot] [PATCH 2/5] clk: renesas: Add R8A77965 clock tables   Marek Vasut
• [U-Boot] [PATCH 2/5] imx: mx7: Add empty arch_cpu_init if skipped   Jun Nie
• [U-Boot] [PATCH 2/5] pico-imx7d: defconfig: Add DT file hooks   Joris Offouga
• [U-Boot] [PATCH 2/5] pico-imx7d: defconfig: Add DT file hooks   Fabio Estevam
• [U-Boot] [PATCH 2/5] test/py: mmc: Add 'mmc dev' test   Marek Vasut
• [U-Boot] [PATCH 2/5] test/py: mmc: Add 'mmc dev' test   Simon Glass
• [U-Boot] [PATCH 2/6] board: stm32mp1: Add board_interface_eth_init   Christophe Roullier
• [U-Boot] [PATCH 2/6] clk: create meson directory and move related drivers   Neil Armstrong
• [U-Boot] [PATCH 2/6] fdt: boot_get_fdt: really boot w/o FDT when "goto no_fdt"   Eugeniu Rosca
• [U-Boot] [PATCH 2/6] fdtdec: Implement fdtdec_get_max_phandle()   Thierry Reding
• [U-Boot] [PATCH 2/6] fdtdec: Implement fdtdec_get_max_phandle()   Simon Glass
• [U-Boot] [PATCH 2/6] fdtdec: Implement fdtdec_get_max_phandle()   Thierry Reding
• [U-Boot] [PATCH 2/6] fdtdec: Implement fdtdec_get_max_phandle()   Simon Glass
• [U-Boot] [PATCH 2/6] i2c: rcar_i2c: Add comments about registers & values   Ismael Luceno Cortes
• [U-Boot] [PATCH 2/6] spl: arm: implement SPL_CLEAR_BSS_F   Simon Goldschmidt
• [U-Boot] [PATCH 2/8] dt: bcm6858: add led controller   Philippe Reynes
• [U-Boot] [PATCH 2/8] rockchip: px5 update dts for spl/tpl   Kever Yang
• [U-Boot] [PATCH 2/8] video/console: Implement reverse video ANSI sequence for DM_VIDEO   Andre Przywara
• [U-Boot] [PATCH 2/8] video/console: Implement reverse video ANSI sequence for DM_VIDEO   Simon Glass
• [U-Boot] [PATCH 2/9] pinctrl: renesas: Fix r8a779{5, 6, 65} rename sel_adg_ to sel_adg   Marek Vasut
• [U-Boot] [PATCH 2/9] riscv: Add a SYSCON driver for Andestech's PLIC   Andes
• [U-Boot] [PATCH 2/9] riscv: Add a SYSCON driver for Andestech's PLIC   Bin Meng
• [U-Boot] [PATCH 2/9] riscv: Add a SYSCON driver for Andestech's PLIC   Rick Chen
• [U-Boot] [PATCH 2/9] riscv: Add a SYSCON driver for Andestech's PLIC   Bin Meng
• [U-Boot] [PATCH 2/9] riscv: Add a SYSCON driver for Andestech's PLIC   Rick Chen
• [U-Boot] [PATCH 2/9] riscv: Add a SYSCON driver for Andestech's PLIC   Troy Benjegerdes
• [U-Boot] [PATCH 20/34] imx: mx6qsabrelite: Update the SabreLite README   sbabic at denx.de
• [U-Boot] [PATCH 21/34] mx6sabresd: README: Adjust the binary name after DM conversion   sbabic at denx.de
• [U-Boot] [PATCH 22/34] mx6sabreauto: README: Adjust the binary name after DM conversion   sbabic at denx.de
• [U-Boot] [PATCH 23/34] imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to Kconfig   sbabic at denx.de
• [U-Boot] [PATCH 24/34] imx8mq_evk: Add myself as a co-maintainer   sbabic at denx.de
• [U-Boot] [PATCH 25/34] imx8qxp: Fix the reported CPU frequency   sbabic at denx.de
• [U-Boot] [PATCH 26/34] board: engicam: Add watchdog support on Engicam   sbabic at denx.de
• [U-Boot] [PATCH 27/34] configs: imx6qdl_icore_mmc: Enable watchdog and bootcounter   sbabic at denx.de
• [U-Boot] [PATCH 28/34] include: configs: imx6-engicam: Add recovery boot option   sbabic at denx.de
• [U-Boot] [PATCH 29/34] ARM: imx6_logic: Fix typo in FDT address   sbabic at denx.de
• [U-Boot] [PATCH 3/3] arm64: xilinx: zynqmp: Remove unneeded configs   Michal Simek
• [U-Boot] [PATCH 3/3] arm: socfpga: put initial U-Boot stack into DDR   Simon Goldschmidt
• [U-Boot] [PATCH 3/3] arm: socfpga: put initial U-Boot stack into DDR   Marek Vasut
• [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ   Simon Goldschmidt
• [U-Boot] [PATCH 3/3] arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ   Marek Vasut
• [U-Boot] [PATCH 3/3] arm: sunxi: Enable DRAM ODT by default on H3/H5   Paul Kocialkowski
• [U-Boot] [PATCH 3/3] armv8: ls1028aqds: Add support of LS1028AQDS   Bhaskar Upadhaya
• [U-Boot] [PATCH 3/3] armv8: ls1028aqds: Add support of LS1028AQDS   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/3] clk: renesas: Add support for setting MMCIF clock divider on Gen2   Marek Vasut
• [U-Boot] [PATCH 3/3] configs: dra7xx_evm_defconfig: Enable TI_DRA7_THERMAL & CMD_THERMAL   Keerthy
• [U-Boot] [PATCH 3/3] dm: remove unused function dm_fdt_pre_reloc   Patrick Delaunay
• [U-Boot] [PATCH 3/3] dm: remove unused function dm_fdt_pre_reloc   Simon Glass
• [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence   Fabio Estevam
• [U-Boot] [PATCH 3/3] logos: Add the TechNexion's logo   Fabio Estevam
• [U-Boot] [PATCH 3/3] mach-meson: g12a: add DWC2 peripheral mode support   Neil Armstrong
• [U-Boot] [PATCH 3/3] net: rtl8169: Support RTL-8168h/8111h   Thierry Reding
• [U-Boot] [PATCH 3/3] rockchip: correct ARCH_SOC name   Kever Yang
• [U-Boot] [PATCH 3/3] rockchip: correct ARCH_SOC name   Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: correct ARCH_SOC name   Kever Yang
• [U-Boot] [PATCH 3/3] sandbox: Properly print physical addresses   Thierry Reding
• [U-Boot] [PATCH 3/3] SPL: Default to disabling legacy image support when using FIT   Tom Rini
• [U-Boot] [PATCH 3/4] arm: mvebu: db-mv784mp-gp_defconfig: Enable CONFIG_BLK   Stefan Roese
• [U-Boot] [PATCH 3/4] ARM: renesas: Save boot parameters passed in by ATF   Marek Vasut
• [U-Boot] [PATCH 3/4] ARM: renesas: Save boot parameters passed in by ATF   Eugeniu Rosca
• [U-Boot] [PATCH 3/4] ARM: renesas: Save boot parameters passed in by ATF   Tom Rini
• [U-Boot] [PATCH 3/4] ARM: renesas: Save boot parameters passed in by ATF   Eugeniu Rosca
• [U-Boot] [PATCH 3/4] ARM: renesas: Save boot parameters passed in by ATF   Marek Vasut
• [U-Boot] [PATCH 3/4] ARM: rmobile: alt: Synchronize defconfig   Marek Vasut
• [U-Boot] [PATCH 3/4] ARM: socfpga: Fix Arria10 SPI and NAND U-Boot offset   Marek Vasut
• [U-Boot] [PATCH 3/4] ARM: socfpga: Fix Arria10 SPI and NAND U-Boot offset   Simon Goldschmidt
• [U-Boot] [PATCH 3/4] arm: socfpga: socrates: make rtc work   Simon Goldschmidt
• [U-Boot] [PATCH 3/4] arm: socfpga: socrates: make rtc work   Stefan Roese
• [U-Boot] [PATCH 3/4] configs: odroid_xu3: Unify indentation   Minkyu Kang
• [U-Boot] [PATCH 3/4] mips: add missing dtb-y to arch/mips/dts/Makefile   Masahiro Yamada
• [U-Boot] [PATCH 3/4] mips: add missing dtb-y to arch/mips/dts/Makefile   Daniel Schwierzeck
• [U-Boot] [PATCH 3/4] net: mscc: jaguar2: Add ethenet nodes for Jaguar2.   Horatiu Vultur
• [U-Boot] [PATCH 3/4] pinctrl: at91: add compatibles for SAM9X60 pin controller   Claudiu.Beznea at microchip.com
• [U-Boot] [PATCH 3/4] powerpc: mpc85xx: delete FSL_SATA for T2080QDS board.   Peng Ma
• [U-Boot] [PATCH 3/4] rk3288-board: cosmetic: document selecting RK PWM   Urja Rannikko
• [U-Boot] [PATCH 3/4] rk3288-board: cosmetic: document selecting RK PWM   Simon Glass
• [U-Boot] [PATCH 3/4] rk3288-board: cosmetic: document selecting RK PWM   Urja Rannikko
• [U-Boot] [PATCH 3/4] rockchip: rk3399: Add Orangepi RK3399 support   Jagan Teki
• [U-Boot] [PATCH 3/4] x86: coreboot: Add the missing pc speaker node in the device tree   Simon Glass
• [U-Boot] [PATCH 3/4] x86: coreboot: Add the missing pc speaker node in the device tree   Bin Meng
• [U-Boot] [PATCH 3/5] arm: k3: Add support for updating msmc dt node   Lokesh Vutla
• [U-Boot] [PATCH 3/5] pico-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7   Joris Offouga
• [U-Boot] [PATCH 3/5] pico-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7   Fabio Estevam
• [U-Boot] [PATCH 3/5] pico-imx7d: Reserve region of memory to OPTEE   Jun Nie
• [U-Boot] [PATCH 3/5] pinctrl: renesas: Add R8A77965 pin control tables   Marek Vasut
• [U-Boot] [PATCH 3/5] test/py: mmc: Add 'mmc rescan' test   Marek Vasut
• [U-Boot] [PATCH 3/5] test/py: mmc: Add 'mmc rescan' test   Simon Glass
• [U-Boot] [PATCH 3/6] clk: meson: add g12a support   Neil Armstrong
• [U-Boot] [PATCH 3/6] dlmalloc: fix malloc range at end of ram   Simon Goldschmidt
• [U-Boot] [PATCH 3/6] fdt: boot_get_fdt: simplify no_fdt handling (non-functional)   Eugeniu Rosca
• [U-Boot] [PATCH 3/6] fdtdec: Implement fdtdec_set_phandle()   Thierry Reding
• [U-Boot] [PATCH 3/6] fdtdec: Implement fdtdec_set_phandle()   Simon Glass
• [U-Boot] [PATCH 3/6] fdtdec: Implement fdtdec_set_phandle()   Thierry Reding
• [U-Boot] [PATCH 3/6] fdtdec: Implement fdtdec_set_phandle()   Simon Glass
• [U-Boot] [PATCH 3/6] i2c: rcar_i2c: Fix sending of slave addresses   Ismael Luceno Cortes
• [U-Boot] [PATCH 3/6] net: dwc_eth_qos: add Ethernet stm32mp1 support   Christophe Roullier
• [U-Boot] [PATCH 3/8] dt: bcm968580xref: enable led controller   Philippe Reynes
• [U-Boot] [PATCH 3/8] rockchip: px5: update SPL size for spl/tpl   Kever Yang
• [U-Boot] [PATCH 3/8] video/console: Implement relative cursor movement ANSI handling   Andre Przywara
• [U-Boot] [PATCH 3/8] video/console: Implement relative cursor movement ANSI handling   Simon Glass
• [U-Boot] [PATCH 3/9] pinctrl: renesas: Remove r8a779{5, 6, 65} CC5_OSCOUT of IP17   Marek Vasut
• [U-Boot] [PATCH 3/9] riscv: Add a SYSCON driver for Andestech's PLMT   Andes
• [U-Boot] [PATCH 3/9] riscv: Add a SYSCON driver for Andestech's PLMT   Bin Meng
• [U-Boot] [PATCH 3/9] riscv: Add a SYSCON driver for Andestech's PLMT   Rick Chen
• [U-Boot] [PATCH 30/34] ARM: imx6q_logic: Enable MTD and NAND_MXS_DT   sbabic at denx.de
• [U-Boot] [PATCH 31/34] imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdef   sbabic at denx.de
• [U-Boot] [PATCH 32/34] arm: dts: imx6qdl-u-boot: Enable spba-bus at 2000000 simple bus   sbabic at denx.de
• [U-Boot] [PATCH 32/36] rockchip: remove rk_timer   Alexander Kochetkov
• [U-Boot] [PATCH 32/36] rockchip: remove rk_timer   Kever Yang
• [U-Boot] [PATCH 33/34] MTD: mxs_nand_spl: Redo the way nand_init initializes   sbabic at denx.de
• [U-Boot] [PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic   sbabic at denx.de
• [U-Boot] [PATCH 4/4] arm: exynos: Remove duplicated "boardname" env setting   Minkyu Kang
• [U-Boot] [PATCH 4/4] ARM: renesas: Configure DRAM size from ATF DT fragment   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: renesas: Configure DRAM size from ATF DT fragment   Eugeniu Rosca
• [U-Boot] [PATCH 4/4] ARM: renesas: Configure DRAM size from ATF DT fragment   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: renesas: Configure DRAM size from ATF DT fragment   Eugeniu Rosca
• [U-Boot] [PATCH 4/4] ARM: rmobile: Fix PHY LED mode register mask   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: socfpga: Fix A10 SoCDK Kconfig   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: socfpga: Fix A10 SoCDK Kconfig   Chee, Tien Fong
• [U-Boot] [PATCH 4/4] configs: enable sata device module in T2080QDS   Peng Ma
• [U-Boot] [PATCH 4/4] configs: mscc_jr2: Add network support   Horatiu Vultur
• [U-Boot] [PATCH 4/4] configs: socfpga: socrates: enable rtc support   Simon Goldschmidt
• [U-Boot] [PATCH 4/4] configs: socfpga: socrates: enable rtc support   Stefan Roese
• [U-Boot] [PATCH 4/4] doc: rockchip: Add global doc for rk3399 build/run   Jagan Teki
• [U-Boot] [PATCH 4/4] dw_mmc: turn on the IO supply   Urja Rannikko
• [U-Boot] [PATCH 4/4] dw_mmc: turn on the IO supply   Heiko Stübner
• [U-Boot] [PATCH 4/4] dw_mmc: turn on the IO supply   Urja Rannikko
• [U-Boot] [PATCH 4/4] Makefile: Correct logic for DM_SCSI + unconverted drivers check   Stefan Roese
• [U-Boot] [PATCH 4/4] Makefile: Correct logic for DM_SCSI + unconverted drivers check   Tom Rini
• [U-Boot] [PATCH 4/4] Makefile: Correct logic for DM_SCSI + unconverted drivers check   Stefan Roese
• [U-Boot] [PATCH 4/4] pinctrl: at91: add slewrate support for SAM9X60   Claudiu.Beznea at microchip.com
• [U-Boot] [PATCH 4/4] Revert "Ensure device tree DTS is compiled"   Masahiro Yamada
• [U-Boot] [PATCH 4/4] x86: crownbay: Enable the beeper sound driver   Simon Glass
• [U-Boot] [PATCH 4/4] x86: crownbay: Enable the beeper sound driver   Bin Meng
• [U-Boot] [PATCH 4/4 v2] Makefile: Correct logic for DM_SCSI + unconverted drivers check   Stefan Roese
• [U-Boot] [PATCH 4/4 v2] Makefile: Correct logic for DM_SCSI + unconverted drivers check   Tom Rini
• [U-Boot] [PATCH 4/5] ARM: dts: rmobile: Import R8A77965 M3NULCB DTs   Marek Vasut
• [U-Boot] [PATCH 4/5] board: ti: am65x: Enable fixing up msmc sram node   Lokesh Vutla
• [U-Boot] [PATCH 4/5] pico-imx7d: Add boot option for verified boot   Jun Nie
• [U-Boot] [PATCH 4/5] pico-imx7d: Convert DM MMC   Joris Offouga
• [U-Boot] [PATCH 4/5] test/py: mmc: Add 'mmc info' test   Marek Vasut
• [U-Boot] [PATCH 4/5] test/py: mmc: Add 'mmc info' test   Simon Glass
• [U-Boot] [PATCH 4/6] ARM: dts: stm32: Add Ethernet support on stm32mp1   Christophe Roullier
• [U-Boot] [PATCH 4/6] ARM: meson: add G12a support   Neil Armstrong
• [U-Boot] [PATCH 4/6] dlmalloc: be compatible to tiny printf   Simon Goldschmidt
• [U-Boot] [PATCH 4/6] fdt: boot_get_fdt: unify 'fdt_len' validation (non-functional)   Eugeniu Rosca
• [U-Boot] [PATCH 4/6] fdtdec: Implement fdtdec_add_reserved_memory()   Thierry Reding
• [U-Boot] [PATCH 4/6] fdtdec: Implement fdtdec_add_reserved_memory()   Simon Glass
• [U-Boot] [PATCH 4/6] fdtdec: Implement fdtdec_add_reserved_memory()   Thierry Reding
• [U-Boot] [PATCH 4/6] fdtdec: Implement fdtdec_add_reserved_memory()   Simon Glass
• [U-Boot] [PATCH 4/6] i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH 4/8] bcm968580xref: enable led support   Philippe Reynes
• [U-Boot] [PATCH 4/8] rockchip: px5: update defconfig for TPL/SPL   Kever Yang
• [U-Boot] [PATCH 4/8] video/console: Implement ANSI clear line command   Andre Przywara
• [U-Boot] [PATCH 4/8] video/console: Implement ANSI clear line command   Simon Glass
• [U-Boot] [PATCH 4/9] pinctrl: renesas: Fix r8a779{6, 65} rename sel_ndfc to sel_ndf   Marek Vasut
• [U-Boot] [PATCH 4/9] riscv: ae350: initialize PLIC   Andes
• [U-Boot] [PATCH 5/5] ARM: board: meson: add p201 board   Mohammad Rasim
• [U-Boot] [PATCH 5/5] ARM: rmobile: Add R8A77965 M3NULCB support   Marek Vasut
• [U-Boot] [PATCH 5/5] configs: am65x_evm_a53: Enable CONFIG_OF_BOARD_SETUP   Lokesh Vutla
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Jun Nie
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Otavio Salvador
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Jun Nie
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Jun Nie
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Otavio Salvador
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Fabio Estevam
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Jun Nie
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Otavio Salvador
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Fabio Estevam
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Jun Nie
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Fabio Estevam
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Jun Nie
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Otavio Salvador
• [U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config   Fabio Estevam
• [U-Boot] [PATCH 5/5] pico-imx7d: Increase u-boot size for dfu request   Joris Offouga
• [U-Boot] [PATCH 5/5] pico-imx7d: Increase u-boot size for dfu request   Fabio Estevam
• [U-Boot] [PATCH 5/5] test/py: mmc: Add 'mmc read' performance check   Marek Vasut
• [U-Boot] [PATCH 5/5] test/py: mmc: Add 'mmc read' performance check   Simon Glass
• [U-Boot] [PATCH 5/6] ARM: dts: Import Amlogic G12A u200 DT from Linux 5.1-rc1   Neil Armstrong
• [U-Boot] [PATCH 5/6] fdt: boot_get_fdt: android: compress handling (non-functional)   Eugeniu Rosca
• [U-Boot] [PATCH 5/6] fdtdec: Implement carveout support functions   Thierry Reding
• [U-Boot] [PATCH 5/6] fdtdec: Implement carveout support functions   Simon Glass
• [U-Boot] [PATCH 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Marek Vasut
• [U-Boot] [PATCH 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Marek Vasut
• [U-Boot] [PATCH 5/6] spl: support using full malloc with SYS_MALLOC_F_LEN   Simon Goldschmidt
• [U-Boot] [PATCH 5/6] spl: support using full malloc with SYS_MALLOC_F_LEN   Simon Glass
• [U-Boot] [PATCH 5/6] spl: support using full malloc with SYS_MALLOC_F_LEN   Simon Goldschmidt
• [U-Boot] [PATCH 5/6] stm32mp1: Add Ethernet support for stm32mp1 board   Christophe Roullier
• [U-Boot] [PATCH 5/7] Convert CONFIG_SF_DEFAULT_* to Kconfig   Patrick DELAUNAY
• [U-Boot] [PATCH 5/7] Convert CONFIG_SF_DEFAULT_* to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH 5/7] Convert CONFIG_SF_DEFAULT_* to Kconfig   Patrick DELAUNAY
• [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Rick Chen
• [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Auer, Lukas
• [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Anup Patel
• [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Auer, Lukas
• [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Anup Patel
• [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Rick Chen
• [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Auer, Lukas
• [U-Boot] [PATCH 5/8] led: bcm6858: allow to use this driver on ARCH_963158   Philippe Reynes
• [U-Boot] [PATCH 5/8] rockchip: boot0: update CONFIG_ROCKCHIP_SPL_RESERVE_IRAM for SPL only   Kever Yang
• [U-Boot] [PATCH 5/8] video/console: Factor out actual character output   Andre Przywara
• [U-Boot] [PATCH 5/8] video/console: Factor out actual character output   Simon Glass
• [U-Boot] [PATCH 5/9] pinctrl: renesas: r8a77990: Fix rename RTSx_N_TANS_x to RTSx_N_x   Marek Vasut
• [U-Boot] [PATCH 5/9] riscv: ae350: disable ATCPIT100 timer   Andes
• [U-Boot] [PATCH 5/9] riscv: ae350: disable ATCPIT100 timer   Bin Meng
• [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs   Eugeniu Rosca
• [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs   Marek Vasut
• [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs   Eugeniu Rosca
• [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs   Marek Vasut
• [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs   Masahiro Yamada
• [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs   Ismael Luceno Cortes
• [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs   Marek Vasut
• [U-Boot] [PATCH 6/6] arm: socfpga: a10: move SPL stack size to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH 6/6] arm: socfpga: a10: move SPL stack size to Kconfig   Chee, Tien Fong
• [U-Boot] [PATCH 6/6] boards: meson: add g12a u200   Neil Armstrong
• [U-Boot] [PATCH 6/6] configs: stm32mp15: Enable Ethernet feature   Christophe Roullier
• [U-Boot] [PATCH 6/6] fdt: boot_get_fdt: android: use ENV 'fdtaddr' as fallback   Eugeniu Rosca
• [U-Boot] [PATCH 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Ismael Luceno Cortes
• [U-Boot] [PATCH 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Marek Vasut
• [U-Boot] [PATCH 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Ismael Luceno Cortes
• [U-Boot] [PATCH 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Marek Vasut
• [U-Boot] [PATCH 6/6] p2371-2180: Add support for framebuffer carveouts   Thierry Reding
• [U-Boot] [PATCH 6/6] p2371-2180: Add support for framebuffer carveouts   Simon Glass
• [U-Boot] [PATCH 6/8] dt: bcm63158: add led controller   Philippe Reynes
• [U-Boot] [PATCH 6/8] rockchip: dmc: rk3368: update rank number for evb-px5   Kever Yang
• [U-Boot] [PATCH 6/8] video/console: Convert UTF-8 codes to CP437 code points   Andre Przywara
• [U-Boot] [PATCH 6/8] video/console: Convert UTF-8 codes to CP437 code points   Simon Glass
• [U-Boot] [PATCH 6/8] video/console: Convert UTF-8 codes to CP437 code points   Alexander Graf
• [U-Boot] [PATCH 6/8] video/console: Convert UTF-8 codes to CP437 code points   André Przywara
• [U-Boot] [PATCH 6/9] pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit2 when using RX2, TX2 and SCK2   Marek Vasut
• [U-Boot] [PATCH 6/9] riscv: ax25: Add platform-specific Kconfig options   Andes
• [U-Boot] [PATCH 6/9] riscv: ax25: Add platform-specific Kconfig options   Bin Meng
• [U-Boot] [PATCH 6/9] sunxi: allow 32-bit builds for 64-bit SoCs   Alexander Graf
• [U-Boot] [PATCH 7/8] dt: bcm963158: enable led controller   Philippe Reynes
• [U-Boot] [PATCH 7/8] rockchip: rk3368: remove uart iomux init in SPL   Kever Yang
• [U-Boot] [PATCH 7/8] usb: kbd: Properly translate up/down arrow keys   Andre Przywara
• [U-Boot] [PATCH 7/8] usb: kbd: Properly translate up/down arrow keys   Simon Glass
• [U-Boot] [PATCH 7/9] pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit16 when using NFALE and NFRB_N   Marek Vasut
• [U-Boot] [PATCH 7/9] riscv: ax25: Andes specific cache shall only support in M-mode.   Andes
• [U-Boot] [PATCH 7/9] riscv: ax25: Andes specific cache shall only support in M-mode.   Bin Meng
• [U-Boot] [PATCH 7/9] riscv: ax25: Andes specific cache shall only support in M-mode.   Rick Chen
• [U-Boot] [PATCH 8/8] bcm963158: enable led support   Philippe Reynes
• [U-Boot] [PATCH 8/8] rockchip: px5: add timer0 dts node as tick timer   Kever Yang
• [U-Boot] [PATCH 8/8] sunxi: allow boards to de-select SYS_WHITE_ON_BLACK font scheme   Andre Przywara
• [U-Boot] [PATCH 8/8] sunxi: allow boards to de-select SYS_WHITE_ON_BLACK font scheme   Simon Glass
• [U-Boot] [PATCH 8/9] pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit3 when using TX0   Marek Vasut
• [U-Boot] [PATCH 8/9] riscv: dts: ae350 support SMP.   Andes
• [U-Boot] [PATCH 8/9] riscv: dts: ae350 support SMP.   Bin Meng
• [U-Boot] [PATCH 8/9] riscv: dts: ae350 support SMP.   Rick Chen
• [U-Boot] [PATCH 8/9] riscv: dts: ae350 support SMP.   Bin Meng
• [U-Boot] [PATCH 8/9] riscv: dts: ae350 support SMP.   Rick Chen
• [U-Boot] [PATCH 8/9] riscv: dts: ae350 support SMP.   Bin Meng
• [U-Boot] [PATCH 8/9] riscv: dts: ae350 support SMP.   Rick Chen
• [U-Boot] [PATCH 9/9] pinctrl: renesas: r8a77990: Reivse USB ID pin name   Marek Vasut
• [U-Boot] [PATCH 9/9] riscv: ae350: enable SMP   Andes
• [U-Boot] [PATCH 9/9] riscv: ae350: enable SMP   Bin Meng
• [U-Boot] [PATCH] Add dfu command entry to MAINTAINERS   Anatolij Gustschin
• [U-Boot] [PATCH] Add dfu command entry to MAINTAINERS   Lukasz Majewski
• [U-Boot] [PATCH] Add dfu command entry to MAINTAINERS   Andy Shevchenko
• [U-Boot] [PATCH] added uart1-3 support for the allwinner h3   Manuel Dipolt
• [U-Boot] [PATCH] am335x-fb: don't override lcd_get_size()   David Rivshin
• [U-Boot] [PATCH] ARC: AXS10x: drop NAND support   Eugeniy Paltsev
• [U-Boot] [PATCH] arm64: dts: rockchip: Fix io power source for sdmmc0 on Firefly-RK3399   Maruyama Shohei
• [U-Boot] [PATCH] arm64: zynqmp: Add idcode for new RFSoC silicon ZU39DR   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Use zynqmp_mmio_read/write functions   Michal Simek
• [U-Boot] [PATCH] ARM: am3517_evm: Add spl_start_uboot for Falcon Mode   Adam Ford
• [U-Boot] [PATCH] ARM: at91: sama5d2: Wrap cpu detection to fix macb driver   Alexander Dahl
• [U-Boot] [PATCH] ARM: at91: sama5d2: Wrap cpu detection to fix macb driver   Alexander Dahl
• [U-Boot] [PATCH] ARM: at91: sama5d2: Wrap cpu detection to fix macb driver   Bin Meng
• [U-Boot] [PATCH] ARM: at91: sama5d2: Wrap cpu detection to fix macb driver   Alexander Dahl
• [U-Boot] [PATCH] ARM: at91: sama5d2: Wrap cpu detection to fix macb driver   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] ARM: at91: sama5d2: Wrap cpu detection to fix macb driver   Alexander Dahl
• [U-Boot] [PATCH] ARM: at91: sama5d2: Wrap cpu detection to fix macb driver   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] ARM: da850evm: Remove legacy MMC code   Adam Ford
• [U-Boot] [PATCH] arm: dts: exynos: Adjust whitespace around status property   Minkyu Kang
• [U-Boot] [PATCH] ARM: DTS: imx6q-logicpd: Resync with Linux 5.1   Adam Ford
• [U-Boot] [PATCH] ARM: DTS: imx6q-logicpd: Resync with Linux 5.1   Fabio Estevam
• [U-Boot] [PATCH] ARM: DTS: imx6q-logicpd: Resync with Linux 5.1   Adam Ford
• [U-Boot] [PATCH] ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Eugeniu Rosca
• [U-Boot] [PATCH] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Eugeniu Rosca
• [U-Boot] [PATCH] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Eugeniu Rosca
• [U-Boot] [PATCH] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Eugeniu Rosca
• [U-Boot] [PATCH] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC   Ley Foon Tan
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC   Ley Foon Tan
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC   Ley Foon Tan
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC   Ley Foon Tan
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC   Dinh Nguyen
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC   Dinh Nguyen
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing altr, sysmgr-syscon for EMAC   Dinh Nguyen
• [U-Boot] [PATCH] arm: dts: Stratix10: Add QSPI node   Ley Foon Tan
• [U-Boot] [PATCH] arm: dts: Stratix10: Add QSPI node   Ley Foon Tan
• [U-Boot] [PATCH] arm: dts: Stratix10: Add QSPI node   Marek Vasut
• [U-Boot] [PATCH] arm: dts: Stratix10: Add QSPI node   Simon Goldschmidt
• [U-Boot] [PATCH] arm: dts: Stratix10: Add QSPI node   Ley Foon Tan
• [U-Boot] [PATCH] arm: exynos: odroid: Fix build if BOARD_TYPES are not set   Krzysztof Kozlowski
• [U-Boot] [PATCH] arm: exynos: odroid: Fix build if BOARD_TYPES are not set   Minkyu Kang
• [U-Boot] [PATCH] ARM: Fix nand boot of imx6q and imx6qdl boards   Michael Trimarchi
• [U-Boot] [PATCH] ARM: Fix nand boot of imx6q and imx6qdl boards   Shyam Saini
• [U-Boot] [PATCH] ARM: Fix nand boot of imx6q and imx6qdl boards   Jagan Teki
• [U-Boot] [PATCH] ARM: Fix nand boot of imx6q and imx6qdl boards   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] ARM: HYP/non-sec: Don't enable ARMV7_LPAE for old sunxi kernels   Jonathan Liu
• [U-Boot] [PATCH] ARM: imx6logic: Stop overwriting fdt_file if manually set   Adam Ford
• [U-Boot] [PATCH] ARM: imx6q_logic: Enable UUID support   Adam Ford
• [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug   Stefan Roese
• [U-Boot] [PATCH] ARM: kirkwood: disable dcache for Kirkwood boards   Chris Packham
• [U-Boot] [PATCH] ARM: kirkwood: disable dcache for Kirkwood boards   Stefan Roese
• [U-Boot] [PATCH] arm: kirkwood: lsxl: disable dcache   Michael Walle
• [U-Boot] [PATCH] arm: kirkwood: lsxl: disable dcache   Chris Packham
• [U-Boot] [PATCH] ARM: kirkwood: remove obsolete call to icache_enable   Leigh Brown
• [U-Boot] [PATCH] ARM: kirkwood: remove obsolete call to icache_enable   Stefan Roese
• [U-Boot] [PATCH] ARM: meson: display Amlogic SoC Information   Julien Masson
• [U-Boot] [PATCH] ARM: meson: display Amlogic SoC Information   Neil Armstrong
• [U-Boot] [PATCH] arm: mvebu: clearfog: document eMMC installation   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: clearfog: document eMMC installation   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR   Chris Packham
• [U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR   Vignesh Raghavendra
• [U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR   Vignesh Raghavendra
• [U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR   Vignesh Raghavendra
• [U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: ds412: Enable CONFIG_BLK   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: set CONFIG_SYS_MALLOC_F_LEN to 0x2000   Chris Packham
• [U-Boot] [PATCH] ARM: mvebu: set CONFIG_SYS_MALLOC_F_LEN to 0x2000   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: theadorable: Add test for ctrl-c in PCIe PEX switch test   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: turris_omnia: select Kconfig SPI_FLASH_SPANSION   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: turris_omnia: select Kconfig SPI_FLASH_SPANSION   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: use correct name for pcie controller   Chris Packham
• [U-Boot] [PATCH] ARM: mvebu: use correct name for pcie controller   Stefan Roese
• [U-Boot] [PATCH] ARM: Odroid XU3: Enable driver I2C support for OdroidXU3   Minkyu Kang
• [U-Boot] [PATCH] ARM: rmobile: alt: Increase USB power-good delay   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Convert to bootm_size   Eugeniu Rosca
• [U-Boot] [PATCH] ARM: rmobile: Convert to bootm_size   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Convert to bootm_size   Eugeniu Rosca
• [U-Boot] [PATCH] ARM: rmobile: Convert to bootm_size   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: ebisu: Remove CONFIG_NET_MULTI   Eugeniu Rosca
• [U-Boot] [PATCH] ARM: rmobile: ebisu: Remove CONFIG_NET_MULTI   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: rcar-gen2: Activate bootm_size   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: rcar-gen2: Activate bootm_size   Eugeniu Rosca
• [U-Boot] [PATCH] ARM: rmobile: rcar-gen3: Activate bootm_size   Eugeniu Rosca
• [U-Boot] [PATCH] ARM: rmobile: rcar-gen3: Activate bootm_size   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices   Dalon Westergreen
• [U-Boot] [PATCH] ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices   Dalon L Westergreen
• [U-Boot] [PATCH] ARM: socfpga: configure pl310 from dts   Dinh Nguyen
• [U-Boot] [PATCH] ARM: socfpga: configure pl310 from dts   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies   Dinh Nguyen
• [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies   Dinh Nguyen
• [U-Boot] [PATCH] ARM: socfpga: Fix EMIF clear timeout   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make SPL_TEXT_BASE overridable   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make SPL_TEXT_BASE overridable   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make SPL_TEXT_BASE overridable   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make SPL_TEXT_BASE overridable   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make SPL_TEXT_BASE overridable   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make SPL_TEXT_BASE overridable   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make SPL_TEXT_BASE overridable   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make SPL_TEXT_BASE overridable   Tom Rini
• [U-Boot] [PATCH] arm: socfpga: make SPL_TEXT_BASE overridable   Tom Rini
• [U-Boot] [PATCH] arm: socfpga: Move Stratix 10 SDRAM driver to DM   Ley Foon Tan
• [U-Boot] [PATCH] arm: socfpga: Move Stratix 10 SDRAM driver to DM   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: Move Stratix 10 SDRAM driver to DM   Ley Foon Tan
• [U-Boot] [PATCH] arm: socfpga: Move Stratix 10 SDRAM driver to DM   Simon Goldschmidt
• [U-Boot] [PATCH] arm: sunxi: Add support for the RerVision H3-DVK board   Paul Kocialkowski
• [U-Boot] [PATCH] arm: timer: sunxi: fix a64 spurious timeout issues   Oskari Lemmela
• [U-Boot] [PATCH] arm: timer: sunxi: fix a64 spurious timeout issues   Peter Robinson
• [U-Boot] [PATCH] arm: timer: sunxi: fix a64 spurious timeout issues   Oskari Lemmelä
• [U-Boot] [PATCH] arm: timer: sunxi: fix a64 spurious timeout issues   Samuel Holland
• [U-Boot] [PATCH] arm: timer: sunxi: fix a64 spurious timeout issues   André Przywara
• [U-Boot] [PATCH] arm: timer: sunxi: fix a64 spurious timeout issues   Oskari Lemmelä
• [U-Boot] [PATCH] arm: zynq: Add an info message about post config   Michal Simek
• [U-Boot] [PATCH] ARM: zynq: Check zynq aes & rsa command parameters count   Michal Simek
• [U-Boot] [PATCH] armv7: ls102xa: Add workaround for DDR erratum A-008850   Alison Wang
• [U-Boot] [PATCH] armv7: ls102xa: Add workaround for DDR erratum A-008850   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv7R: K3: am654: Trigger panic on DDR init failures   Andreas Dannenberg
• [U-Boot] [PATCH] armv7R: K3: am654: Trigger panic on DDR init failures   Lokesh Vutla
• [U-Boot] [PATCH] armv8: fsl-layerscape: updated copyright info   Pankaj Bansal
• [U-Boot] [PATCH] arndale: fix unknown status   Minkyu Kang
• [U-Boot] [PATCH] arndale: fix unknown status   Minkyu Kang
• [U-Boot] [PATCH] arndale: fix unknown status   Krzysztof Kozlowski
• [U-Boot] [PATCH] arndale: fix unknown status   Minkyu Kang
• [U-Boot] [PATCH] arndale: fix unknown status   Krzysztof Kozlowski
• [U-Boot] [PATCH] arndale: fix unknown status   Tom Rini
• [U-Boot] [PATCH] arndale: fix unknown status   Krzysztof Kozlowski
• [U-Boot] [PATCH] arndale: fix unknown status   Tom Rini
• [U-Boot] [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board   Prabhakar Kushwaha
• [U-Boot] [PATCH] board/freescale: Fix for not loading MC firmware correctly   Pankaj Bansal
• [U-Boot] [PATCH] board: fsl: lx2160aqds: modify the phy fixup code   Joe Hershberger
• [U-Boot] [PATCH] board: fsl: lx2160aqds: modify the phy fixup code   Prabhakar Kushwaha
• [U-Boot] [PATCH] board: ls1046qds: Enable PPA for secure boot   Prabhakar Kushwaha
• [U-Boot] [PATCH] board: ls1046qds: Enable PPA for secure boot   Prabhakar Kushwaha
• [U-Boot] [PATCH] bootm: mips: Remove boot_reloc_ramdisk   Horatiu Vultur
• [U-Boot] [PATCH] bootm: mips: Remove boot_reloc_ramdisk   Daniel Schwierzeck
• [U-Boot] [PATCH] bootm: mips: Remove boot_reloc_ramdisk   Horatiu Vultur
• [U-Boot] [PATCH] bootm: mips: Remove boot_reloc_ramdisk   Daniel Schwierzeck
• [U-Boot] [PATCH] bootm: mips: Remove boot_reloc_ramdisk   Daniel Schwierzeck
• [U-Boot] [PATCH] bootm: Simplying cache flush code   Trent Piepho
• [U-Boot] [PATCH] bootm: Simplying cache flush code   Simon Glass
• [U-Boot] [PATCH] clk: sunxi: a10: Add CLK_AHB_GMAC   Jagan Teki
• [U-Boot] [PATCH] cmd: mmc: Make Mode: printout consistent   Marek Vasut
• [U-Boot] [PATCH] common: image-android-dt: Fix out-of-bounds access   Eugeniu Rosca
• [U-Boot] [PATCH] common: spl_fit: Allow firmware image if no loadables   Abel Vesa
• [U-Boot] [PATCH] common: spl_fit: Allow firmware image if no loadables   Fabio Estevam
• [U-Boot] [PATCH] configs/clearfog_gt_8k: add network interface support   Stefan Roese
• [U-Boot] [PATCH] configs: am335x_evm: Add CONFIG_BLK   Faiz Abbas
• [U-Boot] [PATCH] configs: am57xx_evm: Remove ENV_IS_IN_FAT   Faiz Abbas
• [U-Boot] [PATCH] configs: am57xx_evm: Remove ENV_IS_IN_FAT   Tom Rini
• [U-Boot] [PATCH] configs: am57xx_evm: Remove ENV_IS_IN_FAT   Faiz Abbas
• [U-Boot] [PATCH] configs: am57xx_evm: Remove ENV_IS_IN_FAT   Tom Rini
• [U-Boot] [PATCH] configs: am57xx_evm: Remove ENV_IS_IN_FAT   Lokesh Vutla
• [U-Boot] [PATCH] configs: am57xx_evm: Remove ENV_IS_IN_FAT   Sam Protsenko
• [U-Boot] [PATCH] configs: fsl: move DDR specific defines to Kconfig   Prabhakar Kushwaha
• [U-Boot] [PATCH] configs: icorem6: Use imx6 cratch register for bootcount   Jagan Teki
• [U-Boot] [PATCH] configs: icorem6: Use imx6 cratch register for bootcount   Shyam Saini
• [U-Boot] [PATCH] configs: icorem6: Use imx6 cratch register for bootcount   Stefano Babic
• [U-Boot] [PATCH] configs: icorem6: Use imx6 cratch register for bootcount   Shyam Saini
• [U-Boot] [PATCH] configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable   Kuldeep Singh
• [U-Boot] [PATCH] configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable   Jagdish Gediya
• [U-Boot] [PATCH] configs: Stratix10: Remove CONFIG_USE_TINY_PRINTF   Ley Foon Tan
• [U-Boot] [PATCH] configs: Stratix10: Remove CONFIG_USE_TINY_PRINTF   Marek Vasut
• [U-Boot] [PATCH] configs: ti: Move FIT image load address to avoid overwrite   Andrew F. Davis
• [U-Boot] [PATCH] configs: ti: Move FIT image load address to avoid overwrite   Tom Rini
• [U-Boot] [PATCH] configs: ti: Move FIT image load address to avoid overwrite   Andrew F. Davis
• [U-Boot] [PATCH] Convert CONFIG_IP_DEFRAG to Kconfig   Christian Gmeiner
• [U-Boot] [PATCH] Convert CONFIG_IP_DEFRAG to Kconfig   Joe Hershberger
• [U-Boot] [PATCH] core: ofnode: Fix ASAN-reported stack-buffer-overflow in of_get_address   Eugeniu Rosca
• [U-Boot] [PATCH] core: ofnode: Fix ASAN-reported stack-buffer-overflow in of_get_address   Simon Glass
• [U-Boot] [PATCH] core: ofnode: Fix ASAN-reported stack-buffer-overflow in of_get_address   Eugeniu Rosca
• [U-Boot] [PATCH] core: ofnode: Fix ASAN-reported stack-buffer-overflow in of_get_address   Simon Glass
• [U-Boot] [PATCH] dfu: usb: Update MAINTAINERS file regarding DFU/USB gadget support   Lukasz Majewski
• [U-Boot] [PATCH] dm: Add a No-op uclass   Jean-Jacques Hiblot
• [U-Boot] [PATCH] dm: Add a No-op uclass   Sergey Kubushyn
• [U-Boot] [PATCH] dm: Add a No-op uclass   Jean-Jacques Hiblot
• [U-Boot] [PATCH] dm: Add a No-op uclass   Simon Glass
• [U-Boot] [PATCH] dm: Also remove interrupts property from SPL DT   Simon Glass
• [U-Boot] [PATCH] dm: check OF_LIVE is enabled   Simon Glass
• [U-Boot] [PATCH] dm: check OF_LIVE is enabled   Ibai Erkiaga Elorza
• [U-Boot] [PATCH] dm: check OF_LIVE is enabled   Simon Glass
• [U-Boot] [PATCH] dm: remove pre reloc properties in SPL and TPL device tree   Simon Glass
• [U-Boot] [PATCH] dm: remove pre reloc properties in SPL and TPL device tree   Patrick DELAUNAY
• [U-Boot] [PATCH] dm: remove pre reloc properties in SPL and TPL device tree   Simon Glass
• [U-Boot] [PATCH] dma: bcm6348: check if driver is enabled before send/recv   Álvaro Fernández Rojas
• [U-Boot] [PATCH] dma: bcm6348: check if driver is enabled before send/recv   Daniel Schwierzeck
• [U-Boot] [PATCH] driver: net: fsl-mc: Fix DPC MAC address fixup   Prabhakar Kushwaha
• [U-Boot] [PATCH] driver: net: fsl-mc: Fix DPC MAC address fixup   Laurentiu Tudor
• [U-Boot] [PATCH] driver: net: fsl-mc: Fix DPC MAC address fixup   Joe Hershberger
• [U-Boot] [PATCH] driver: net: fsl-mc: Fix DPC MAC address fixup   Prabhakar Kushwaha
• [U-Boot] [PATCH] driver: net: updated copyright info   Pankaj Bansal
• [U-Boot] [PATCH] drivers/net/fec: phy_init: remove redundant logic   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/phy: implement fallback mechanism for negative phy adresses   Hannes Schmelzer
• [U-Boot] [PATCH] drivers/net/phy: implement fallback mechanism for negative phy adresses   Hannes Schmelzer
• [U-Boot] [PATCH] drivers/net/phy: implement fallback mechanism for negative phy adresses   Michal Simek
• [U-Boot] [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled   Joe Hershberger
• [U-Boot] [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled   Prabhakar Kushwaha
• [U-Boot] [PATCH] drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset   Prabhakar Kushwaha
• [U-Boot] [PATCH] drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset   Joe Hershberger
• [U-Boot] [PATCH] drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset   Prabhakar Kushwaha
• [U-Boot] [PATCH] dts: force dtb recompilation   Patrick Delaunay
• [U-Boot] [PATCH] dts: force dtb recompilation   Tom Rini
• [U-Boot] [PATCH] dts: force dtb recompilation   Masahiro Yamada
• [U-Boot] [PATCH] dts: force dtb recompilation   Patrick DELAUNAY
• [U-Boot] [PATCH] env: add support to sunxi save env to spi   Oskari Lemmela
• [U-Boot] [PATCH] env: add support to sunxi save env to spi   Paul Kocialkowski
• [U-Boot] [PATCH] env: Update env addr for mmc environment driver   Pankit Garg
• [U-Boot] [PATCH] espresso7420: remove duplicated config   Minkyu Kang
• [U-Boot] [PATCH] espresso7420: remove duplicated config   Minkyu Kang
• [U-Boot] [PATCH] fastboot: getvar: correct/rename "has_slot" to "has-slot"   Eugeniu Rosca
• [U-Boot] [PATCH] fastboot: getvar: correct/rename "has_slot" to "has-slot"   Alex Kiernan
• [U-Boot] [PATCH] fastboot: getvar: fix broken 'fastboot flash' when partition has slots   Eugeniu Rosca
• [U-Boot] [PATCH] fastboot: getvar: fix broken 'fastboot flash' when partition has slots   Alex Kiernan
• [U-Boot] [PATCH] fastboot: getvar: fix broken 'fastboot flash' when partition has slots   Alex Kiernan
• [U-Boot] [PATCH] fastboot: getvar: fix broken 'fastboot flash' when partition has slots   Eugeniu Rosca
• [U-Boot] [PATCH] fastboot: getvar: fix broken 'fastboot flash' when partition has slots   Alex Kiernan
• [U-Boot] [PATCH] fastboot: getvar: fix broken 'fastboot flash' when partition has slots   Eugeniu Rosca
• [U-Boot] [PATCH] fdt: Remove duplicate code   Thierry Reding
• [U-Boot] [PATCH] fdt: Remove duplicate code   Simon Glass
• [U-Boot] [PATCH] fit: load all fragments from the extra configurations   Peter Ujfalusi
• [U-Boot] [PATCH] fit: load all fragments from the extra configurations   Lokesh Vutla
• [U-Boot] [PATCH] fix compile error on macOS Mojave   wangqiang1588 at sina.com
• [U-Boot] [PATCH] Fix ext4 block group descriptor sizing   Tom Rini
• [U-Boot] [PATCH] Fix spelling of download.   Vagrant Cascadian
• [U-Boot] [PATCH] Fix spelling of download.   Bin Meng
• [U-Boot] [PATCH] Fix spelling of download.   Lukasz Majewski
• [U-Boot] [PATCH] git-mailrc: update the kirkwood entry   Baruch Siach
• [U-Boot] [PATCH] git-mailrc: update the kirkwood entry   Stefan Roese
• [U-Boot] [PATCH] hikey: Take peripherals out of reset during board init   Manivannan Sadhasivam
• [U-Boot] [PATCH] hikey: Take peripherals out of reset during board init   Peter Griffin
• [U-Boot] [PATCH] hikey: Take peripherals out of reset during board init   Manivannan Sadhasivam
• [U-Boot] [PATCH] hikey: Take peripherals out of reset during board init   Daniel Thompson
• [U-Boot] [PATCH] i2c: i2c_cdns: Fix below warnings with checker tool   Michal Simek
• [U-Boot] [PATCH] i2c: i2c_cdns: Fix below warnings with checker tool   Heiko Schocher
• [U-Boot] [PATCH] i2c: i2c_cdns: Fix below warnings with checker tool   Michal Simek
• [U-Boot] [PATCH] i2c: meson: add configurable divider factors   Guillaume La Roque
• [U-Boot] [PATCH] i2c: rcar_i2c: Add Gen3 SoC support   Marek Vasut
• [U-Boot] [PATCH] i2c: rcar_i2c: Add Gen3 SoC support   Heiko Schocher
• [U-Boot] [PATCH] i2c: rcar_iic: Read ICSR only once   Marek Vasut
• [U-Boot] [PATCH] i2c: rcar_iic: Read ICSR only once   Heiko Schocher
• [U-Boot] [PATCH] ihs_mdio: Use new regmap interface   Mario Six
• [U-Boot] [PATCH] image: fdt: handle coalesced reserve region   Patrick Delaunay
• [U-Boot] [PATCH] imx8qxp: mek: enable dm-spl for pm   Peng Fan
• [U-Boot] [PATCH] imx8qxp: mek: enable dm-spl for pm   Peng Fan
• [U-Boot] [PATCH] lib: time: update module enable MACRO   Kever Yang
• [U-Boot] [PATCH] lib: time: update module enable MACRO   Philipp Tomsich
• [U-Boot] [PATCH] lib: tiny-printf: Add "%ll" modifier support   Tom Rini
• [U-Boot] [PATCH] lib: tiny-printf: Add "%ll" modifier support   Ley Foon Tan
• [U-Boot] [PATCH] lib: tiny-printf: Add "%ll" modifier support   Ley Foon Tan
• [U-Boot] [PATCH] lib: tiny-printf: Add "%ll" modifier support   Tom Rini
• [U-Boot] [PATCH] lib: tiny-printf: Add "%ll" modifier support   Ley Foon Tan
• [U-Boot] [PATCH] lib: tiny-printf: Add "%ll" modifier support   Marek Vasut
• [U-Boot] [PATCH] lib: tiny-printf: Add "%ll" modifier support   Tom Rini
• [U-Boot] [PATCH] MAINTAINERS: Remove unsupported statuses - Odd Fixes and Obsolete   Krzysztof Kozlowski
• [U-Boot] [PATCH] MAINTAINERS: Remove unsupported statuses - Odd Fixes and Obsolete   Tom Rini
• [U-Boot] [PATCH] MAINTAINERS: Update u-boot-marvell entry   Stefan Roese
• [U-Boot] [PATCH] Makefile: Do not pass -E to mkimage when SPL has full fitImage support   Marek Vasut
• [U-Boot] [PATCH] Makefile: Prioritize external dtb if defined   Michal Simek
• [U-Boot] [PATCH] Makefile: Prioritize external dtb if defined   Simon Glass
• [U-Boot] [PATCH] malloc: Fix memalign not honoring alignment prior to full malloc init   Andreas Dannenberg
• [U-Boot] [PATCH] malloc: Fix memalign not honoring alignment prior to full malloc init   Lokesh Vutla
• [U-Boot] [PATCH] MC : Report extra reserved memory to Linux   Meenakshi Aggarwal
• [U-Boot] [PATCH] mips: mt76xx: gardena-smart-gateway: Correct spelling of GARDENA   Stefan Roese
• [U-Boot] [PATCH] mips: mt76xx: gardena-smart-gateway: Correct spelling of GARDENA   Daniel Schwierzeck
• [U-Boot] [PATCH] misc: fs_loader: Replace label with DT phandle   Simon Glass
• [U-Boot] [PATCH] misc: fs_loader: Replace label with DT phandle   Chee, Tien Fong
• [U-Boot] [PATCH] misc: fs_loader: Replace label with DT phandle   Simon Glass
• [U-Boot] [PATCH] misc: fs_loader: Replace label with DT phandle   Chee, Tien Fong
• [U-Boot] [PATCH] mmc: Align MMC_TRACE with tiny printf   Marek Vasut
• [U-Boot] [PATCH] mmc: correct the HS400 initialization process   BOUGH CHEN
• [U-Boot] [PATCH] mmc: correct the HS400 initialization process   Marek Vasut
• [U-Boot] [PATCH] mmc: correct the HS400 initialization process   BOUGH CHEN
• [U-Boot] [PATCH] mmc: correct the HS400 initialization process   Marek Vasut
• [U-Boot] [PATCH] mmc: correct the HS400 initialization process   Tom Rini
• [U-Boot] [PATCH] mmc: correct the HS400 initialization process   Marek Vasut
• [U-Boot] [PATCH] mmc: dw_mmc: Calculate timeout from transfer length   Marek Vasut
• [U-Boot] [PATCH] mmc: dw_mmc: Calculate timeout from transfer length   Simon Glass
• [U-Boot] [PATCH] mmc: dw_mmc: Handle return value from bounce_buffer_start()   Marek Vasut
• [U-Boot] [PATCH] mmc: dw_mmc: Handle return value from bounce_buffer_start()   Simon Glass
• [U-Boot] [PATCH] mmc: dw_mmc: Round up descriptor end to nearest multiple of cacheline size   Marek Vasut
• [U-Boot] [PATCH] mmc: dw_mmc: Round up descriptor end to nearest multiple of cacheline size   Simon Glass
• [U-Boot] [PATCH] mmc: dw_mmc: Round up descriptor end to nearest multiple of cacheline size   Marek Vasut
• [U-Boot] [PATCH] mmc: sh_mmcif: Set default MMCIF clock rate   Marek Vasut
• [U-Boot] [PATCH] mmc: tmio: Clamp SD_SECCNT to 16bit values on 16bit IP   Marek Vasut
• [U-Boot] [PATCH] mpc83xx: Define _end symbol   Mario Six
• [U-Boot] [PATCH] mpc83xx_clk: Add enable method   Mario Six
• [U-Boot] [PATCH] mtd: spi: Add Macronix MX66U2G45F device   Marek Vasut
• [U-Boot] [PATCH] mtd: spi: Add Macronix MX66U2G45F device   Jagan Teki
• [U-Boot] [PATCH] mtd: spi: Add Macronix MX66U2G45F device   Marek Vasut
• [U-Boot] [PATCH] mvebu: drop dangling SPI flash comments and #ifdefs   Baruch Siach
• [U-Boot] [PATCH] mvebu: drop dangling SPI flash comments and #ifdefs   Stefan Roese
• [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices   Keerthy
• [U-Boot] [PATCH] net: gem: Remove phy autodetection code   Michal Simek
• [U-Boot] [PATCH] net: macb: Add small delay after link establishment   Stefan Roese
• [U-Boot] [PATCH] net: macb: Add small delay after link establishment   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] net: macb: Add small delay after link establishment   Stefan Roese
• [U-Boot] [PATCH] net: macb: Add small delay after link establishment   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] net: macb: Add small delay after link establishment   Stefan Roese
• [U-Boot] [PATCH] net: mscc: ocelot: Fix reset of the phys   Horatiu Vultur
• [U-Boot] [PATCH] net: mscc: ocelot: Fix reset of the phys   Daniel Schwierzeck
• [U-Boot] [PATCH] net:phy:aquantia Set only autoneg on in register 4.c441   Joe Hershberger
• [U-Boot] [PATCH] net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together   James Byrne
• [U-Boot] [PATCH] net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together   Joe Hershberger
• [U-Boot] [PATCH] net: sh_eth: Initialize PHY in probe() once   Marek Vasut
• [U-Boot] [PATCH] net: zynq_gem: Modify phy supported features after max-speed was set   Michal Simek
• [U-Boot] [PATCH] optee: support rockchip optee binary release   Kever Yang
• [U-Boot] [PATCH] optee: support rockchip optee binary release   Philipp Tomsich
• [U-Boot] [PATCH] optee: support rockchip optee binary release   Kever Yang
• [U-Boot] [PATCH] optee: support rockchip optee binary release   Philipp Tomsich
• [U-Boot] [PATCH] optee: support rockchip optee binary release   Heiko Stübner
• [U-Boot] [PATCH] p2371-2180: Build position independent binary   Thierry Reding
• [U-Boot] [PATCH] p2371-2180: Build position independent binary   Stephen Warren
• [U-Boot] [PATCH] p2371-2180: Build position independent binary   Thierry Reding
• [U-Boot] [PATCH] p2371-2180: Build position independent binary   Stephen Warren
• [U-Boot] [PATCH] p2371-2180: Build position independent binary   Thierry Reding
• [U-Boot] [PATCH] p2371-2180: Build position independent binary   Stephen Warren
• [U-Boot] [PATCH] pci: pci_mvebu: Add comment about missing of_n_addr_cells() call   Stefan Roese
• [U-Boot] [PATCH] phy: sun4i-usb: Fix PHY0 routing and passby configuration for MUSB   Paul Kocialkowski
• [U-Boot] [PATCH] phy: ti: Init node before reading   Michal Simek
• [U-Boot] [PATCH] phy: ti: Init node before reading   Hannes Schmelzer
• [U-Boot] [PATCH] phy: ti: Init node before reading   Lukasz Majewski
• [U-Boot] [PATCH] phy: ti: Init node before reading   Michal Simek
• [U-Boot] [PATCH] pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition   Otavio Salvador
• [U-Boot] [PATCH] pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition   Fabio Estevam
• [U-Boot] [PATCH] pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition   Otavio Salvador
• [U-Boot] [PATCH] pico-imx6ul: Fix eMMC boot after DM_MMC conversion   Fabio Estevam
• [U-Boot] [PATCH] pico-imx6ul: Fix eMMC boot after DM_MMC conversion   Lukasz Majewski
• [U-Boot] [PATCH] pico-imx6ul: Fix eMMC boot after DM_MMC conversion   Fabio Estevam
• [U-Boot] [PATCH] pico-imx6ul: Fix eMMC boot after DM_MMC conversion   Lukasz Majewski
• [U-Boot] [PATCH] pico-imx6ul: Fix eMMC boot after DM_MMC conversion   Fabio Estevam
• [U-Boot] [PATCH] pico-imx6ul: Fix eMMC boot after DM_MMC conversion   Stefano Babic
• [U-Boot] [PATCH] pico-imx7: Disable video support   Fabio Estevam
• [U-Boot] [PATCH] pico-imx7: Disable video support   Joris OFFOUGA
• [U-Boot] [PATCH] pico-imx7: Disable video support   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] pico-imx7: Disable video support   Fabio Estevam
• [U-Boot] [PATCH] pico-imx7: Disable video support   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] pico-imx7: Disable video support   Fabio Estevam
• [U-Boot] [PATCH] pico-imx7: Disable video support   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] pico-imx7: Disable video support   Fabio Estevam
• [U-Boot] [PATCH] pico-imx7: Disable video support   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] pico-imx7: Disable video support   Fabio Estevam
• [U-Boot] [PATCH] pico-imx7: Disable video support   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] pico-imx7: Disable video support   Fabio Estevam
• [U-Boot] [PATCH] pico-imx7: Disable video support   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] pico-imx7: Disable video support   Fabio Estevam
• [U-Boot] [PATCH] pico-imx7d: README: Recommend the usage of a USB hub   Fabio Estevam
• [U-Boot] [PATCH] pinctrl: rockchip: Add 32bit writing function for rk3288 gpio0 pinctrl   Philipp Tomsich
• [U-Boot] [PATCH] pm9g45: Migrate to CONFIG_DM   Ilko Iliev
• [U-Boot] [PATCH] pm9g45: Migrate to CONFIG_DM   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] powerpc: Simplify processor.h   Mario Six
• [U-Boot] [PATCH] reset-meson: Add AXG reset compatible   Neil Armstrong
• [U-Boot] [PATCH] Revert "arm: config: fix default console only to specify the device"   Anand Moon
• [U-Boot] [PATCH] Revert "arm: config: fix default console only to specify the device"   Seung-Woo Kim
• [U-Boot] [PATCH] Revert "arm: config: fix default console only to specify the device"   Anand Moon
• [U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Simon Goldschmidt
• [U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Michal Simek
• [U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Simon Goldschmidt
• [U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Michal Simek
• [U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Simon Goldschmidt
• [U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Lukasz Majewski
• [U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Simon Goldschmidt
• [U-Boot] [PATCH] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Simon Goldschmidt
• [U-Boot] [PATCH] Revert "Ensure device tree DTS is compiled"   Masahiro Yamada
• [U-Boot] [PATCH] Revert "env: add spi_flash_read_env function"   Heiko Schocher
• [U-Boot] [PATCH] Revert "env: add spi_flash_read_env function"   Stefano Babic
• [U-Boot] [PATCH] Revert "env: add spi_flash_read_env function"   Horatiu Vultur
• [U-Boot] [PATCH] Revert "env: add spi_flash_read_env function"   Heiko Schocher
• [U-Boot] [PATCH] Revert "env: add spi_flash_read_env function"   Horatiu Vultur
• [U-Boot] [PATCH] Revert "fs: fat: support write with non-zero offset"   Faiz Abbas
• [U-Boot] [PATCH] Revert "fs: fat: support write with non-zero offset"   Tom Rini
• [U-Boot] [PATCH] Revert "pico-imx7d: Add LCD support"   Joris Offouga
• [U-Boot] [PATCH] Revert "pico-imx7d: Add LCD support"   Fabio Estevam
• [U-Boot] [PATCH] Revert "pico-imx7d: Add LCD support"   Offouga Joris
• [U-Boot] [PATCH] Revert "pico-imx7d: Add LCD support"   Stefano Babic
• [U-Boot] [PATCH] Revert "pico-imx7d: Add LCD support"   Joris Offouga
• [U-Boot] [PATCH] Revert "pico-imx7d: Add LCD support"   Fabio Estevam
• [U-Boot] [PATCH] Revert "pico-imx7d: Add LCD support"   Otavio Salvador
• [U-Boot] [PATCH] Revert "pico-imx7d: Add LCD support"   Joris Offouga
• [U-Boot] [PATCH] rockchip: arm: remove no use macro   Kever Yang
• [U-Boot] [PATCH] rockchip: arm: remove no use macro   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3399: add support for chromebook_kevin   Marty E. Plummer
• [U-Boot] [PATCH] RPi: Add mbrugger as board maintainer   matthias.bgg at kernel.org
• [U-Boot] [PATCH] RPi: Add mbrugger as board maintainer   Heinrich Schuchardt
• [U-Boot] [PATCH] RPi: Add mbrugger as board maintainer   Alexander Graf
• [U-Boot] [PATCH] rsa: check that pointer checksum isn't NULL before using it   Philippe Reynes
• [U-Boot] [PATCH] rsa: check that pointer checksum isn't NULL before using it   Simon Glass
• [U-Boot] [PATCH] scripts/Makefile.extrawarn: Silence more DTC warnings   Tom Rini
• [U-Boot] [PATCH] socfpga: add Simon Goldschmidt as co-custodian   Simon Goldschmidt
• [U-Boot] [PATCH] socfpga: add Simon Goldschmidt as co-custodian   Stefan Roese
• [U-Boot] [PATCH] socfpga: add Simon Goldschmidt as co-custodian   Marek Vasut
• [U-Boot] [PATCH] spi: designware: Change include order   Jagan Teki
• [U-Boot] [PATCH] spi: spi-mem: Check if exec_op function is set before calling it   Bernhard Messerklinger
• [U-Boot] [PATCH] spi: zynqmp_gqspi: Fix tap delay values at 100MHz and 150MHz   Michal Simek
• [U-Boot] [PATCH] spl: add debug print for early malloc usage   Marek Vasut
• [U-Boot] [PATCH] spl: add debug print for early malloc usage   Simon Goldschmidt
• [U-Boot] [PATCH] spl: add debug print for early malloc usage   Marek Vasut
• [U-Boot] [PATCH] spl: add debug print for early malloc usage   Simon Goldschmidt
• [U-Boot] [PATCH] spl: add size check including devicetree   Simon Goldschmidt
• [U-Boot] [PATCH] spl: avoid printf when we might be doing Ymodem with CONFIG_SPL_FIT_SIGNATURE   Alex Kiernan
• [U-Boot] [PATCH] spl: avoid printf when we might be doing Ymodem with CONFIG_SPL_FIT_SIGNATURE   Marek Vasut
• [U-Boot] [PATCH] spl: avoid printf when we might be doing Ymodem with CONFIG_SPL_FIT_SIGNATURE   Alex Kiernan
• [U-Boot] [PATCH] spl: fit: handle mmc read to sram case in rockchip SoCs   Kever Yang
• [U-Boot] [PATCH] spl: fit: handle mmc read to sram case in rockchip SoCs   Simon Goldschmidt
• [U-Boot] [PATCH] spl: fit: handle mmc read to sram case in rockchip SoCs   Kever Yang
• [U-Boot] [PATCH] spl: fit: handle mmc read to sram case in rockchip SoCs   Philipp Tomsich
• [U-Boot] [PATCH] spl: spl_nand.c: Add NAND loading message   Stefan Roese
• [U-Boot] [PATCH] spl: spl_nand.c: Add NAND loading message   Tom Rini
• [U-Boot] [PATCH] spl: spl_nand.c: Add NAND loading message   Stefan Roese
• [U-Boot] [PATCH] spl: ymodem: Add support for loading full fitImages   Marek Vasut
• [U-Boot] [PATCH] spl: ymodem: Add support for loading full fitImages   Lokesh Vutla
• [U-Boot] [PATCH] spl: ymodem: Add support for loading full fitImages   Marek Vasut
• [U-Boot] [PATCH] sun50i: a64: Add Oceanic 5205 5inMFD initial support   Jagan Teki
• [U-Boot] [PATCH] sunxi: dts: Add Pine64-LTS .dtb to Makefile   Andre Przywara
• [U-Boot] [PATCH] sunxi: Pine64-LTS: (Re-)enable USB 1.x support   Andre Przywara
• [U-Boot] [PATCH] sunxi: Pine64-LTS: (Re-)enable USB 1.x support   André Przywara
• [U-Boot] [PATCH] sunxi: Pine64-LTS: (Re-)enable USB 1.x support   Jagan Teki
• [U-Boot] [PATCH] sunxi: update SATA driver to always use DM_SCSI   Jagan Teki
• [U-Boot] [PATCH] sunxi: video: HDMI: Fix clock setup   Jernej Skrabec
• [U-Boot] [PATCH] sunxi: video: HDMI: Fix clock setup   Maxime Ripard
• [U-Boot] [PATCH] sunxi: video: HDMI: Fix clock setup   Jagan Teki
• [U-Boot] [PATCH] sunxi: video: HDMI: Fix clock setup   Jernej Škrabec
• [U-Boot] [PATCH] sunxi: video: HDMI: Fix clock setup   Anatolij Gustschin
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Marek Vasut
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Marek Vasut
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Marek Vasut
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Marek Vasut
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Marek Vasut
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Marek Vasut
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Marek Vasut
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Marek Vasut
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCH] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCH] ti: am335x_evm: Enable CONFIG_SPL_OF_CONTROL   Tom Rini
• [U-Boot] [PATCH] ti: am335x_evm: Enable CONFIG_SPL_OF_CONTROL   Faiz Abbas
• [U-Boot] [PATCH] ti: am335x_evm: Enable CONFIG_SPL_OF_CONTROL   Tom Rini
• [U-Boot] [PATCH] ti: am335x_evm: Enable CONFIG_SPL_OF_CONTROL   Lokesh Vutla
• [U-Boot] [PATCH] ti: am335x_evm: Enable CONFIG_SPL_OF_CONTROL   Tom Rini
• [U-Boot] [PATCH] ti: am335x_evm: Enable CONFIG_SPL_OF_CONTROL   Faiz Abbas
• [U-Boot] [PATCH] tools/Makefile: build host tools with -std=gnu99   Thomas Petazzoni
• [U-Boot] [PATCH] tools/Makefile: build host tools with -std=gnu99   Philipp Tomsich
• [U-Boot] [PATCH] travis-ci: fix at91 missing boards   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] travis-ci: fix at91 missing boards   Tom Rini
• [U-Boot] [PATCH] travis: Add srecord package   Marek Vasut
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Marek Vasut
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Marek Vasut
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Marek Vasut
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Marek Vasut
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Marek Vasut
• [U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible   Peng Fan
• [U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible   Peng Fan
• [U-Boot] [PATCH RESEND 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition   Peng Fan
• [U-Boot] [PATCH RESEND 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition   Peng Fan
• [U-Boot] [PATCH RESEND 04/10] arm: dts: introduce dtsi for i.MX8QM   Peng Fan
• [U-Boot] [PATCH RESEND 05/10] imx8: add cpu support   Peng Fan
• [U-Boot] [PATCH RESEND 06/10] clk: imx8: split code into common and soc specific part   Peng Fan
• [U-Boot] [PATCH RESEND 07/10] clk: imx8: add i.MX8QM clk driver   Peng Fan
• [U-Boot] [PATCH RESEND 08/10] imx8: imx8-pins: add i.MX8QM   Peng Fan
• [U-Boot] [PATCH RESEND 09/10] misc: imx8: scu: add i.MX8QM support   Peng Fan
• [U-Boot] [PATCH RESEND 10/10] imx: support i.MX8QM MEK board   Peng Fan
• [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI   Ang, Chee Hong
• [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI   Tom Rini
• [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI   Ang, Chee Hong
• [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI   Tom Rini
• [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI   Ang, Chee Hong
• [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI   Tom Rini
• [U-Boot] [PATCHv1 0/4] dm: cache: add dm cache driver   Dinh Nguyen
• [U-Boot] [PATCHv1 0/4] dm: cache: add dm cache driver   Marek Vasut
• [U-Boot] [PATCH v1 00/14] colibri-imx6ull device tree enablement and driver model conversion   Marcel Ziswiler
• [U-Boot] [PATCH v10 0/9] Add support for loading FPGA bitstream   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 0/9] Add support for loading FPGA bitstream   Chee, Tien Fong
• [U-Boot] [PATCH v10 0/9] Add support for loading FPGA bitstream   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 0/9] Add support for loading FPGA bitstream   Marek Vasut
• [U-Boot] [PATCH v10 0/9] Add support for loading FPGA bitstream   Chee, Tien Fong
• [U-Boot] [PATCH v1 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus   Marcel Ziswiler
• [U-Boot] [PATCH v1 01/22] add missing space in comment   Igor Opaniuk
• [U-Boot] [PATCH v10 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 02/14] tdx-cfg-block: simplify i.MX 6 module detection   Marcel Ziswiler
• [U-Boot] [PATCH v1 02/22] vf610: ddrmc: add missing include   Igor Opaniuk
• [U-Boot] [PATCH v10 2/9] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 2/9] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 03/14] colibri-imx6ull: set module variant depending on config block   Marcel Ziswiler
• [U-Boot] [PATCH v1 03/22] imx: bootaux: add dependency on vf610   Igor Opaniuk
• [U-Boot] [PATCH v10 3/9] ARM: socfpga: Cleaning up the messages   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 3/9] ARM: socfpga: Cleaning up the messages   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide   Marcel Ziswiler
• [U-Boot] [PATCH v1 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig   Igor Opaniuk
• [U-Boot] [PATCH v10 4/9] ARM: socfpga: Move the watchdog reset to the looping location   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 4/9] ARM: socfpga: Move the watchdog reset to the looping location   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 05/14] colibri-imx6ull: fix ethernet phy power on   Marcel Ziswiler
• [U-Boot] [PATCH v1 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment   Igor Opaniuk
• [U-Boot] [PATCH v10 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 06/14] board: imx6ull: Add disable PMIC_STBY_REQ   Marcel Ziswiler
• [U-Boot] [PATCH v1 06/22] configs: colibri_vf: limit size of malloc() pool before relocation   Igor Opaniuk
• [U-Boot] [PATCH v10 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 07/14] colibri-imx6ull: configuration clean-up   Marcel Ziswiler
• [U-Boot] [PATCH v10 7/9] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 7/9] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm   Marcel Ziswiler
• [U-Boot] [PATCH v10 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 09/14] colibri-imx6ull: migrate mmc to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v10 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 1/1] spi: fsl_dspi fix to stop extra transmissions   jared.bents at rockwellcollins.com
• [U-Boot] [PATCH v1 1/2] x86: acpi: Add DMA descriptors for SPI5 on Intel Tangier   Bin Meng
• [U-Boot] [PATCH v1 1/3] ppc: t2080qds: add usb node   Yinbo Zhu
• [U-Boot] [PATCH v1 1/3] toradex: configblock: add an -y parameter to 'cfgblock create’   Igor Opaniuk
• [U-Boot] [PATCHv1 1/4] ARM: pl310: Add macro's for handling tag and data latency mask   Dinh Nguyen
• [U-Boot] [PATCHv1 1/4] ARM: pl310: Add macro's for handling tag and data latency mask   Marek Vasut
• [U-Boot] [PATCH v1 1/5] ppc: t2080qds: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v1 10/14] colibri-imx6ull: migrate usb to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v11 0/9] Add support for loading FPGA bitstream   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 11/14] colibri-imx6ull: migrate fec to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v11 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Dinh Nguyen
• [U-Boot] [PATCH v11 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
• [U-Boot] [PATCH v11 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Marek Vasut
• [U-Boot] [PATCH v11 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
• [U-Boot] [PATCH v11 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Marek Vasut
• [U-Boot] [PATCH v11 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
• [U-Boot] [PATCH v1 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property   Marcel Ziswiler
• [U-Boot] [PATCH v1 12/22] config: colibri_vf: use macros from linux/sizes.h   Igor Opaniuk
• [U-Boot] [PATCH v11 2/9] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl   Marcel Ziswiler
• [U-Boot] [PATCH v11 3/9] ARM: socfpga: Cleaning up the messages   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 3/9] ARM: socfpga: Cleaning up the messages   Dinh Nguyen
• [U-Boot] [PATCH v11 3/9] ARM: socfpga: Cleaning up the messages   Chee, Tien Fong
• [U-Boot] [PATCH v1 14/14] ARM: dts: colibri-imx6ull: update device tree   Marcel Ziswiler
• [U-Boot] [PATCH v11 4/9] ARM: socfpga: Move the watchdog reset to the looping location   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 4/9] ARM: socfpga: Move the watchdog reset to the looping location   Dinh Nguyen
• [U-Boot] [PATCH v11 4/9] ARM: socfpga: Move the watchdog reset to the looping location   Chee, Tien Fong
• [U-Boot] [PATCH v1 15/22] colibri_vf: sync the board info message   Igor Opaniuk
• [U-Boot] [PATCH v11 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 16/22] colibri_vf: enable user debug by default   Igor Opaniuk
• [U-Boot] [PATCH v11 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   Dinh Nguyen
• [U-Boot] [PATCH v11 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   Chee, Tien Fong
• [U-Boot] [PATCH v1 17/22] colibri_vf: disable undefined instruction events in user debug   Igor Opaniuk
• [U-Boot] [PATCH v11 7/9] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt   Igor Opaniuk
• [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt   Marcel Ziswiler
• [U-Boot] [PATCH v11 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK   Dinh Nguyen
• [U-Boot] [PATCH v11 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK   Chee, Tien Fong
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Simon Goldschmidt
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Chee, Tien Fong
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Dinh Nguyen
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Chee, Tien Fong
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Simon Goldschmidt
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Chee, Tien Fong
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Chee, Tien Fong
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Dinh Nguyen
• [U-Boot] [PATCH v11 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Chee, Tien Fong
• [U-Boot] [PATCH v1 2/2] x86: acpi: Add DMA descriptors for I2C1 on Intel Tangier   Bin Meng
• [U-Boot] [PATCH v1 2/3] toradex: common: unify behaviour when config block is missing   Igor Opaniuk
• [U-Boot] [PATCH v1 2/3] usb: ehci: ppc: adopt 32 bit address   Yinbo Zhu
• [U-Boot] [PATCHv1 2/4] dm: cache: Create a uclass for cache controller   Dinh Nguyen
• [U-Boot] [PATCHv1 2/4] dm: cache: Create a uclass for cache controller   Marek Vasut
• [U-Boot] [PATCHv1 2/4] dm: cache: Create a uclass for cache controller   Simon Glass
• [U-Boot] [PATCH v1 2/5] mmc: fsl_esdhc: ppc: set sdhc clock   Yinbo Zhu
• [U-Boot] [PATCH v12 0/9] Add support for loading FPGA bitstream   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 22/22] colibri_vf: fix sdboot for vybrid modules   Igor Opaniuk
• [U-Boot] [PATCH v12 2/9] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 3/9] ARM: socfpga: Cleaning up and ensuring consistent format messages in driver   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 4/9] ARM: socfpga: Moving the watchdog reset to the for-loop status polling   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 7/9] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH v1 3/3] configs: enable usb device module in T2080QDS   Yinbo Zhu
• [U-Boot] [PATCH v1 3/3] tdx-cfg-block: fix off by one issue   Igor Opaniuk
• [U-Boot] [PATCHv1 3/4] configs: socfpga: add imply pl310 cache controller   Dinh Nguyen
• [U-Boot] [PATCHv1 3/4] configs: socfpga: add imply pl310 cache controller   Marek Vasut
• [U-Boot] [PATCH v1 3/5] mmc: fsl_esdhc: ppc: adopt 32 bit address   Yinbo Zhu
• [U-Boot] [PATCHv1 4/4] ARM: socfpga: use the pl310 driver to configure the cache   Dinh Nguyen
• [U-Boot] [PATCHv1 4/4] ARM: socfpga: use the pl310 driver to configure the cache   Marek Vasut
• [U-Boot] [PATCH v1 4/5] configs: enable device tree support for T2080QDS   Yinbo Zhu
• [U-Boot] [PATCH v1 5/5] configs: enable eSDHC device module in T2080QDS   Yinbo Zhu
• [U-Boot] [PATCH v1] apalis/colibri_imx6: add device trees to makefile   Marcel Ziswiler
• [U-Boot] [PATCH v1] apalis/colibri_imx6: add device trees to makefile   Igor Opaniuk
• [U-Boot] [PATCH v1] apalis/colibri_imx6: add device trees to makefile   Marcel Ziswiler
• [U-Boot] [PATCH v1] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings   Marcel Ziswiler
• [U-Boot] [PATCH v1] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings   Fabio Estevam
• [U-Boot] [PATCH v1] colibri_vf: fix ethernet by adding explicit phy node   Marcel Ziswiler
• [U-Boot] [PATCH v1] colibri_vf: fix ethernet by adding explicit phy node   Hannes Schmelzer
• [U-Boot] [PATCH v1] colibri_vf: fix ethernet by adding explicit phy node   Igor Opaniuk
• [U-Boot] [PATCH v1] colibri_vf: fix tab vs. spaces   Marcel Ziswiler
• [U-Boot] [PATCH v1] colibri_vf: fix tab vs. spaces   Igor Opaniuk
• [U-Boot] [PATCH v1] dfu: Avoid declaring unused variables and absent parameters   Andy Shevchenko
• [U-Boot] [PATCH v1] dfu: Avoid declaring unused variables and absent parameters   Andy Shevchenko
• [U-Boot] [PATCH v1] dfu: Avoid declaring unused variables and absent parameters   Tom Rini
• [U-Boot] [PATCH v1] dfu: Avoid declaring unused variables and absent parameters   Lukasz Majewski
• [U-Boot] [PATCH v1] dfu: Avoid declaring unused variables and absent parameters   Andy Shevchenko
• [U-Boot] [PATCH v1] dfu: Avoid declaring unused variables and absent parameters   Anatolij Gustschin
• [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   Ang, Chee Hong
• [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   Marek Vasut
• [U-Boot] [PATCH v2, RESEND] fdt: Fix FIT header verification in mkimage and conduct same checks as bootm   Jordan Hand
• [U-Boot] [PATCH v2 0/1] efi_loader: support BootNext and BootCurrent   AKASHI Takahiro
• [U-Boot] [PATCH v2 0/3] Add Ethernet support for Poplar board   Shawn Guo
• [U-Boot] [PATCH v2 0/3] ARM: meson: add p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH v2 0/3] toradex: common: fix/improve config block handling   Marcel Ziswiler
• [U-Boot] [PATCH v2 0/4] Add network support for Jaguar2 SoCs   Horatiu Vultur
• [U-Boot] [PATCH v2 0/4] Add STMFX gpio expander support for stm32mp157c-ev1 board   Patrice Chotard
• [U-Boot] [PATCH v2 0/4] Add Support for NAND in dra71x-evm   Faiz Abbas
• [U-Boot] [PATCH v2 0/4] Add Support for NAND in dra71x-evm   Tom Rini
• [U-Boot] [PATCH v2 0/4] arm: socfpga: enable rtc support for the socrates board   Simon Goldschmidt
• [U-Boot] [PATCH v2 0/5] arm: socfpga: stack and Kconfig cleanups   Simon Goldschmidt
• [U-Boot] [PATCHv2 0/6] dm: cache: add dm cache driver   Dinh Nguyen
• [U-Boot] [PATCH v2 0/6] pico-imx7d: Add support for BL33 case   Jun Nie
• [U-Boot] [PATCH v2 0/6] pico-imx7d: Add support for BL33 case   Otavio Salvador
• [U-Boot] [PATCH v2 0/6] spl: full-featured heap cleanups   Simon Goldschmidt
• [U-Boot] [PATCH v2 0/6] spl: full-featured heap cleanups   Simon Goldschmidt
• [U-Boot] [PATCH v2 0/6] Update Stratix 10 SDRAM driver   Marek Vasut
• [U-Boot] [PATCH v2 0/6] Update Stratix 10 SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH v2 0/7] AE350 SMP support RISC-V   Andes
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Lukas Auer
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Anup Patel
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Auer, Lukas
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Anup Patel
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Andreas Schwab
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Anup Patel
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Andreas Schwab
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Anup Patel
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Andreas Schwab
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Auer, Lukas
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Auer, Lukas
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Anup Patel
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Atish Patra
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Anup Patel
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Andreas Schwab
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Anup Patel
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Andreas Schwab
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Palmer Dabbelt
• [U-Boot] [PATCH v2 0/9] SMP support for RISC-V   Anup Patel
• [U-Boot] [PATCH v2 00/10] rockchip: enable board_debug_uart_init for all soc   Kever Yang
• [U-Boot] [PATCH v2 00/12] ARM: kirkwood: migrate to DM_USB   Chris Packham
• [U-Boot] [PATCH v2 00/12] ARM: kirkwood: migrate to DM_USB   Leigh Brown
• [U-Boot] [PATCH v2 00/12] ARM: kirkwood: migrate to DM_USB   Chris Packham
• [U-Boot] [PATCH v2 00/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Thierry Reding
• [U-Boot] [PATCH v2 00/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Peter Robinson
• [U-Boot] [PATCH v2 00/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Thierry Reding
• [U-Boot] [PATCH v2 00/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Peter Robinson
• [U-Boot] [PATCH v2 00/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Thierry Reding
• [U-Boot] [PATCH v2 00/22] colibri vybrid fixes, device tree enablement and driver model conversion   Marcel Ziswiler
• [U-Boot] [PATCH v2 01/10] rockchip: enable DEBUG_UART_BOARD_INIT by default   Kever Yang
• [U-Boot] [PATCH v2 01/11] fdtdec: Add cpu_to_fdt_{addr, size}() macros   Thierry Reding
• [U-Boot] [PATCH v2 01/12] ARM: kirkwood: add db-88f6281-bp board   Chris Packham
• [U-Boot] [PATCH v2 01/12] ARM: kirkwood: add db-88f6281-bp board   Stefan Roese
• [U-Boot] [PATCH v2 01/12] ARM: kirkwood: add db-88f6281-bp board   Chris Packham
• [U-Boot] [PATCH v2 01/12] ARM: kirkwood: add db-88f6281-bp board   Chris Packham
• [U-Boot] [PATCH v2 01/12] ARM: kirkwood: add db-88f6281-bp board   Stefan Roese
• [U-Boot] [PATCH v2 01/15] ARM: tegra: Use common header for PMU declarations   Thierry Reding
• [U-Boot] [PATCH v2 01/22] Add missing space in comment   Marcel Ziswiler
• [U-Boot] [PATCH v2 02/10] rockchip; kylin-rk3036: enabl DEBUG UART   Kever Yang
• [U-Boot] [PATCH v2 02/11] fdtdec: Add fdt_{addr, size}_unpack() helpers   Thierry Reding
• [U-Boot] [PATCH v2 02/12] ARM: kirkwood: rename KW_CPU_WIN_BASE to MVEBU_CPU_WIN_BASE   Chris Packham
• [U-Boot] [PATCH v2 02/12] ARM: kirkwood: rename KW_CPU_WIN_BASE to MVEBU_CPU_WIN_BASE   Stefan Roese
• [U-Boot] [PATCH v2 02/15] ARM: tegra: Guard clock code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v2 02/22] vf610: ddrmc: add missing include   Marcel Ziswiler
• [U-Boot] [PATCH v2 03/10] rockchip: rk3036: add board_debug_uart_init()   Kever Yang
• [U-Boot] [PATCH v2 03/10] rockchip: rk3036: add board_debug_uart_init()   Jack Mitchell
• [U-Boot] [PATCH v2 03/10] rockchip: rk3036: add board_debug_uart_init()   Kever Yang
• [U-Boot] [PATCH v2 03/11] fdtdec: Implement fdtdec_generate_phandle()   Thierry Reding
• [U-Boot] [PATCH v2 03/12] ARM: kirkwood: remove KW_DEFADR_PCI_IO_REMAP   Chris Packham
• [U-Boot] [PATCH v2 03/12] ARM: kirkwood: remove KW_DEFADR_PCI_IO_REMAP   Stefan Roese
• [U-Boot] [PATCH v2 03/15] ARM: tegra: Guard GP pad control code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v2 03/22] imx: bootaux: add dependency on vf610   Marcel Ziswiler
• [U-Boot] [PATCH v2 04/10] rockchip: rk3188: add board_debug_uart_init()   Kever Yang
• [U-Boot] [PATCH v2 04/11] fdtdec: Implement fdtdec_set_phandle()   Thierry Reding
• [U-Boot] [PATCH v2 04/12] ARM: kirkwood: switch to using mvebu mbus   Chris Packham
• [U-Boot] [PATCH v2 04/12] ARM: kirkwood: switch to using mvebu mbus   Stefan Roese
• [U-Boot] [PATCH v2 04/15] ARM: tegra: Guard memory controller code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v2 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig   Marcel Ziswiler
• [U-Boot] [PATCH v2 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support   Igor Opaniuk
• [U-Boot] [PATCH v2 05/10] rockchip: rk322x: move board_debug_uart_init() to rk322x.c   Kever Yang
• [U-Boot] [PATCH v2 05/11] fdtdec: Implement fdtdec_add_reserved_memory()   Thierry Reding
• [U-Boot] [PATCH v2 05/12] ARM: kirkwood: remove kw_config_adr_windows   Chris Packham
• [U-Boot] [PATCH v2 05/12] ARM: kirkwood: remove kw_config_adr_windows   Stefan Roese
• [U-Boot] [PATCH v2 05/15] ARM: tegra: Guard pin controller code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v2 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment   Marcel Ziswiler
• [U-Boot] [PATCH v2 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration   Igor Opaniuk
• [U-Boot] [PATCH v2 06/10] rockchip: rk3288: use grf structure to access soc_con2   Kever Yang
• [U-Boot] [PATCH v2 06/11] fdtdec: Implement carveout support functions   Thierry Reding
• [U-Boot] [PATCH v2 06/12] ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp   Chris Packham
• [U-Boot] [PATCH v2 06/12] ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp   Stefan Roese
• [U-Boot] [PATCH v2 06/15] ARM: tegra: Guard powergate code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v2 06/22] configs: colibri_vf: limit size of malloc() pool before relocation   Marcel Ziswiler
• [U-Boot] [PATCH v2 07/10] rockchip: rk3288: add board_debug_uart_init()   Kever Yang
• [U-Boot] [PATCH v2 07/11] fdtdec: Add Kconfig symbol for tests   Thierry Reding
• [U-Boot] [PATCH v2 07/12] ARM: kirkwood: enable CONFIG_DM_USB for {dream, guru, sheeva}plug   Chris Packham
• [U-Boot] [PATCH v2 07/12] ARM: kirkwood: enable CONFIG_DM_USB for {dream, guru, sheeva}plug   Stefan Roese
• [U-Boot] [PATCH v2 07/15] ARM: tegra: Fix save_boot_params() prototype   Thierry Reding
• [U-Boot] [PATCH v2 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig   Marcel Ziswiler
• [U-Boot] [PATCH v2 08/10] rockchip: rk3368: move board_debug_uart_init() to rk3368.c   Kever Yang
• [U-Boot] [PATCH v2 08/11] fdtdec: test: Fix build warning   Thierry Reding
• [U-Boot] [PATCH v2 08/12] ARM: kirkwood: enable CONFIG_DM_USB for dns325   Chris Packham
• [U-Boot] [PATCH v2 08/12] ARM: kirkwood: enable CONFIG_DM_USB for dns325   Stefan Roese
• [U-Boot] [PATCH v2 08/15] ARM: tegra: Allow boards to override boot target devices   Thierry Reding
• [U-Boot] [PATCH v2 08/22] ARM: dts: colibri_vf: update device trees   Marcel Ziswiler
• [U-Boot] [PATCH v2 09/10] rockchip: rk3399: use grf structure to access reg   Kever Yang
• [U-Boot] [PATCH v2 09/11] fdtdec: test: Use compound statement macros   Thierry Reding
• [U-Boot] [PATCH v2 09/12] ARM: kirkwood: enable CONFIG_DM_USB for ds109   Chris Packham
• [U-Boot] [PATCH v2 09/12] ARM: kirkwood: enable CONFIG_DM_USB for ds109   Stefan Roese
• [U-Boot] [PATCH v2 09/15] ARM: tegra: Support TZ-only access to PMC   Thierry Reding
• [U-Boot] [PATCH v2 09/22] configs: colibri_vf: disable obscure options   Marcel Ziswiler
• [U-Boot] [PATCH v2 09/22] configs: colibri_vf: disable obscure options   Igor Opaniuk
• [U-Boot] [PATCH v2 09/22] configs: colibri_vf: disable obscure options   Marcel Ziswiler
• [U-Boot] [PATCH v2 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   AKASHI Takahiro
• [U-Boot] [PATCH v2 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   AKASHI Takahiro
• [U-Boot] [PATCH v2 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   AKASHI Takahiro
• [U-Boot] [PATCH v2 1/1] efi_loader: endless loop in add_strings_package()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: fix build error for freestanding.o   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: fix build error for freestanding.o   Tom Rini
• [U-Boot] [PATCH v2 1/1] efi_loader: fix build error for freestanding.o   Andy Shevchenko
• [U-Boot] [PATCH v2 1/1] efi_loader: HII protocols: informative error message   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: HII protocols: informative error message   Alexander Graf
• [U-Boot] [PATCH v2 1/1] efi_loader: memory leak in efi_dump_single_var()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: missing return in efi_get_next_variable_name()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: Patch non-runtime code out at ExitBootServices already   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: release file buffer after loading image   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: remove superfluous check in efi_setup_loaded_image()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] Set environment location to ENVL_NOWHERE with CONFIG_ENV_IS_NOWHERE.   Udit Agarwal
• [U-Boot] [PATCH v2 1/1] Set environment location to ENVL_NOWHERE with CONFIG_ENV_IS_NOWHERE.   Prabhakar Kushwaha
• [U-Boot] [PATCH v2 1/2] common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled   Abel Vesa
• [U-Boot] [PATCH v2 1/2] common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] distro_bootcmd: add spi flash boot command   Jagan Teki
• [U-Boot] [PATCH v2 1/2] eeprom: fix DM_I2C support without CONFIG_SYS_I2C_EEPROM_BUS   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/2] efi_loader: Fix serial console size detection   matthias.bgg at kernel.org
• [U-Boot] [PATCH v2 1/2] efi_loader: Fix serial console size detection   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] efi_loader: Fix serial console size detection   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] imx8mq_evk/README: add missing firmware extract step   Peng Fan
• [U-Boot] [PATCHv2 1/2] ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common place   Tom Rini
• [U-Boot] [PATCHv2 1/2] ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common place   Lokesh Vutla
• [U-Boot] [PATCHv2 1/2] ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common place   Tom Rini
• [U-Boot] [PATCHv2 1/2] ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common place   Lokesh Vutla
• [U-Boot] [PATCHv2 1/2] ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common place   Tom Rini
• [U-Boot] [PATCH v2 1/2] x86: edison: Use proper number of serial interface   Bin Meng
• [U-Boot] [PATCH v2 1/2] x86: TunnelCreek: switch P state to the highest freq   Andy Shevchenko
• [U-Boot] [PATCH v2 1/2] x86: TunnelCreek: switch P state to the highest freq   Bin Meng
• [U-Boot] [PATCH v2 1/2] x86: TunnelCreek: switch P state to the highest freq   Christian Gmeiner
• [U-Boot] [PATCH v2 1/2] x86: TunnelCreek: switch P state to the highest freq   Bin Meng
• [U-Boot] [PATCH v2 1/3] ARM: dts: meson: add p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH v2 1/3] ARM: dts: meson: add p200 and p201 boards   Neil Armstrong
• [U-Boot] [PATCH v2 1/3] fsl_sec: fix register layout on Layerscape architectures   Prabhakar Kushwaha
• [U-Boot] [PATCH v2 1/3] fsl_sec: fix register layout on Layerscape architectures   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v2 1/3] fsl_sec: fix register layout on Layerscape architectures   Laurentiu Tudor
• [U-Boot] [PATCH v2 1/3] ppc: t2080qds: add usb node   Yinbo Zhu
• [U-Boot] [PATCH v2 1/3] toradex: configblock: add an -y parameter to 'cfgblock create’   Marcel Ziswiler
• [U-Boot] [PATCH v2 1/4] i2c: designware: fix reset handling on socfpga gen5   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/4] i2c: designware: fix reset handling on socfpga gen5   Heiko Schocher
• [U-Boot] [PATCH v2 1/4] net: Add MSCC Jaguar2 network driver.   Horatiu Vultur
• [U-Boot] [PATCH v2 1/4] pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver   Patrice Chotard
• [U-Boot] [PATCH v2 1/5] arm: socfpga: fix comment about SPL memory layout   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/5] ppc: t2080qds: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v2 1/6] ddr: altera: stratix10: Move SDRAM size check to SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCHv2 1/6] Documentation: dts: Add pl310 cache controller dts documentation   Dinh Nguyen
• [U-Boot] [PATCHv2 1/6] Documentation: dts: Add pl310 cache controller dts documentation   Simon Glass
• [U-Boot] [PATCH v2 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Ismael Luceno Cortes
• [U-Boot] [PATCH v2 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Marek Vasut
• [U-Boot] [PATCH v2 1/6] mx7_common: Share configs to skip low level init   Jun Nie
• [U-Boot] [PATCH v2 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] [PATCH v2 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] [PATCH v2 1/7] riscv: Add a SYSCON driver for Andestech's PLIC   Andes
• [U-Boot] [PATCH v2 1/7] riscv: Add a SYSCON driver for Andestech's PLIC   Bin Meng
• [U-Boot] [PATCH V2 1/8] led: add initial support for bcm6858   Philippe Reynes
• [U-Boot] [PATCH V2 1/8] led: add initial support for bcm6858   Daniel Schwierzeck
• [U-Boot] [PATCH v2 1/9] riscv: add infrastructure for calling functions on other harts   Lukas Auer
• [U-Boot] [PATCH v2 1/9] riscv: add infrastructure for calling functions on other harts   Anup Patel
• [U-Boot] [PATCH v2 1/9] riscv: add infrastructure for calling functions on other harts   Atish Patra
• [U-Boot] [PATCH v2 1/9] riscv: add infrastructure for calling functions on other harts   Bin Meng
• [U-Boot] [PATCH v2 1/9] riscv: add infrastructure for calling functions on other harts   Auer, Lukas
• [U-Boot] [PATCH v2 10/10] rockchip: rk3399: add board_debug_uart_init()   Kever Yang
• [U-Boot] [PATCH v2 10/10] rockchip: rk3399: add board_debug_uart_init()   Jack Mitchell
• [U-Boot] [PATCH v2 10/10] rockchip: rk3399: add board_debug_uart_init()   Kever Yang
• [U-Boot] [PATCH v2 10/11] fdtdec: test: Add carveout tests   Thierry Reding
• [U-Boot] [PATCH v2 10/12] ARM: kirkwood: enable CONFIG_DM_USB for goflexhome   Chris Packham
• [U-Boot] [PATCH v2 10/12] ARM: kirkwood: enable CONFIG_DM_USB for goflexhome   Stefan Roese
• [U-Boot] [PATCH v2 10/15] ARM: tegra: Workaround UDC boot issues only if necessary   Thierry Reding
• [U-Boot] [PATCH v2 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm   Marcel Ziswiler
• [U-Boot] [PATCH v2 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm   Igor Opaniuk
• [U-Boot] [PATCH v2 11/11] sandbox: Enable fdtdec tests   Thierry Reding
• [U-Boot] [PATCH v2 11/12] ARM: kirkwood: enable CONFIG_DM_USB for lschlv2 and lsxhl   Chris Packham
• [U-Boot] [PATCH v2 11/12] ARM: kirkwood: enable CONFIG_DM_USB for lschlv2 and lsxhl   Stefan Roese
• [U-Boot] [PATCH v2 11/15] ARM: tegra: Restore DRAM bank count   Thierry Reding
• [U-Boot] [PATCH v2 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model   Marcel Ziswiler
• [U-Boot] [PATCH v2 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model   Igor Opaniuk
• [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata to using driver model   Soeren Moch
• [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v2 12/12] ARM: kirkwood: enable CONFIG_DM_USB for nas220   Chris Packham
• [U-Boot] [PATCH v2 12/12] ARM: kirkwood: enable CONFIG_DM_USB for nas220   Stefan Roese
• [U-Boot] [PATCH v2 12/15] ARM: tegra: Unify Tegra186 builds   Thierry Reding
• [U-Boot] [PATCH v2 12/22] config: colibri_vf: use macros from linux/sizes.h   Marcel Ziswiler
• [U-Boot] [PATCH v2 13/15] ARM: tegra: Implement cboot_save_boot_params() in C   Thierry Reding
• [U-Boot] [PATCH v2 13/22] colibri_vf: add distroboot support   Marcel Ziswiler
• [U-Boot] [PATCH v2 13/22] colibri_vf: add distroboot support   Igor Opaniuk
• [U-Boot] [PATCH v2 13/22] colibri_vf: add distroboot support   Marcel Ziswiler
• [U-Boot] [PATCH v2 14/15] ARM: tegra: Implement cboot_get_ethaddr()   Thierry Reding
• [U-Boot] [PATCH v2 14/22] colibri_vf: set fdtfile for distroboot   Marcel Ziswiler
• [U-Boot] [PATCH v2 14/22] colibri_vf: set fdtfile for distroboot   Igor Opaniuk
• [U-Boot] [PATCH v2 15/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Thierry Reding
• [U-Boot] [PATCH v2 15/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Stephen Warren
• [U-Boot] [PATCH v2 15/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Thierry Reding
• [U-Boot] [PATCH v2 15/22] colibri_vf: sync the board info message   Marcel Ziswiler
• [U-Boot] [PATCH v2 16/22] colibri_vf: enable user debug by default   Marcel Ziswiler
• [U-Boot] [PATCH v2 17/22] colibri_vf: disable undefined instruction events in user debug   Marcel Ziswiler
• [U-Boot] [PATCH v2 18/22] config: colibri_vf: enable mtd partitions via dt   Marcel Ziswiler
• [U-Boot] [PATCH v2 19/22] arm: vf610: add uart2 clock/pinmux support   Marcel Ziswiler
• [U-Boot] [PATCHv2 2/2] configs: move CONFIG_SPL_TEXT_BASE to Kconfig   Tom Rini
• [U-Boot] [PATCHv2 2/2] configs: move CONFIG_SPL_TEXT_BASE to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/2] dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()   Simon Glass
• [U-Boot] [PATCH v2 2/2] efi_loader: Fix possible starving in efi_cin_read_key   matthias.bgg at kernel.org
• [U-Boot] [PATCH v2 2/2] efi_loader: Fix possible starving in efi_cin_read_key   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/2] imx8mq_evk/README: fix DDR training firmware path   Peng Fan
• [U-Boot] [PATCH v2 2/2] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/2] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Simon Glass
• [U-Boot] [PATCH v2 2/2] tools: fit_image: Add the loadable property to configs   Abel Vesa
• [U-Boot] [PATCH v2 2/2] tools: fit_image: Add the loadable property to configs   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] tools: fit_image: Add the loadable property to configs   Stefano Babic
• [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board   Bin Meng
• [U-Boot] [PATCH v2 2/3] ARM: board: meson: add p201 board   Mohammad Rasim
• [U-Boot] [PATCH v2 2/3] ARM: board: meson: add p201 board   Neil Armstrong
• [U-Boot] [PATCH v2 2/3] armv8: fsl-layerscape: fix SEC QI ICID setup   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v2 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Joe Hershberger
• [U-Boot] [PATCH v2 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Shawn Guo
• [U-Boot] [PATCH v2 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Joe Hershberger
• [U-Boot] [PATCH v2 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Shawn Guo
• [U-Boot] [PATCH v2 2/3] toradex: common: unify behaviour when config block is missing   Marcel Ziswiler
• [U-Boot] [PATCH v2 2/3] toradex: common: unify behaviour when config block is missing   Igor Opaniuk
• [U-Boot] [PATCH v2 2/3] usb: ehci: ppc: adopt 32 bit address   Yinbo Zhu
• [U-Boot] [PATCH v2 2/4] board: mscc: jr2: Update MSCC Jaguar2 boards   Horatiu Vultur
• [U-Boot] [PATCH v2 2/4] config: stm32mp15: Enable STMFX support   Patrice Chotard
• [U-Boot] [PATCH v2 2/4] rtc: m41t62: add compatible for m41t82   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/5] arm: socfpga: a10: move SPL stack size to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/5] arm: socfpga: a10: move SPL stack size to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/5] mmc: fsl_esdhc: ppc: set sdhc clock   Yinbo Zhu
• [U-Boot] [PATCHv2 2/6] ARM: pl310: Add macro's for handling tag and data latency mask   Dinh Nguyen
• [U-Boot] [PATCHv2 2/6] ARM: pl310: Add macro's for handling tag and data latency mask   Simon Glass
• [U-Boot] [PATCH v2 2/6] ddr: altera: Stratix10: Add multi-banks DRAM size check   Ley Foon Tan
• [U-Boot] [PATCH v2 2/6] i2c: rcar_i2c: Add comments about registers & values   Ismael Luceno Cortes
• [U-Boot] [PATCH v2 2/6] i2c: rcar_i2c: Add comments about registers & values   Marek Vasut
• [U-Boot] [PATCH v2 2/6] imx: mx7: Add empty arch_cpu_init if skipped   Jun Nie
• [U-Boot] [PATCH v2 2/6] spl: arm: implement SPL_CLEAR_BSS_F   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/6] spl: arm: implement SPL_CLEAR_BSS_F   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/7] riscv: Add a SYSCON driver for Andestech's PLMT   Andes
• [U-Boot] [PATCH v2 2/7] riscv: Add a SYSCON driver for Andestech's PLMT   Bin Meng
• [U-Boot] [PATCH V2 2/8] dt: bcm6858: add led controller   Philippe Reynes
• [U-Boot] [PATCH v2 2/9] riscv: import the supervisor binary interface header file   Lukas Auer
• [U-Boot] [PATCH v2 2/9] riscv: import the supervisor binary interface header file   Atish Patra
• [U-Boot] [PATCH v2 20/22] colibri_vf: adjust timing according to data sheet   Marcel Ziswiler
• [U-Boot] [PATCH v2 20/22] colibri_vf: adjust timing according to data sheet   Igor Opaniuk
• [U-Boot] [PATCH v2 21/22] colibri_vf: use leveling evaluated by DDR validation tools   Marcel Ziswiler
• [U-Boot] [PATCH v2 22/22] colibri_vf: fix sdboot for vybrid modules   Marcel Ziswiler
• [U-Boot] [PATCH v2 3/3] ARM: board: meson: add p200 board   Mohammad Rasim
• [U-Boot] [PATCH v2 3/3] ARM: board: meson: add p200 board   Neil Armstrong
• [U-Boot] [PATCH v2 3/3] armv8: fsl-layerscape: avoid DT fixup warning   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v2 3/3] configs: enable usb device module in T2080QDS   Yinbo Zhu
• [U-Boot] [PATCH v2 3/3] tdx-cfg-block: fix off by one issue   Marcel Ziswiler
• [U-Boot] [PATCH v2 3/4] arm: socfpga: socrates: make rtc work   Simon Goldschmidt
• [U-Boot] [PATCH v2 3/4] board: stm32mp1: Force pinctrl driver probe in board_init()   Patrice Chotard
• [U-Boot] [PATCH v2 3/4] net: mscc: jaguar2: Add ethenet nodes for Jaguar2.   Horatiu Vultur
• [U-Boot] [PATCH v2 3/5] arm: socfpga: put initial U-Boot stack into DDR   Simon Goldschmidt
• [U-Boot] [PATCH v2 3/5] mmc: fsl_esdhc: ppc: adopt 32 bit address   Yinbo Zhu
• [U-Boot] [PATCH v2 3/6] configs: stratix10: Change CONFIG_NR_DRAM_BANKS to 2   Ley Foon Tan
• [U-Boot] [PATCH v2 3/6] dlmalloc: fix malloc range at end of ram   Simon Goldschmidt
• [U-Boot] [PATCH v2 3/6] dlmalloc: fix malloc range at end of ram   Simon Goldschmidt
• [U-Boot] [PATCHv2 3/6] dm: cache: Create a uclass for cache   Dinh Nguyen
• [U-Boot] [PATCHv2 3/6] dm: cache: Create a uclass for cache   Simon Glass
• [U-Boot] [PATCH v2 3/6] i2c: rcar_i2c: Fix sending of slave addresses   Ismael Luceno Cortes
• [U-Boot] [PATCH v2 3/6] i2c: rcar_i2c: Fix sending of slave addresses   Marek Vasut
• [U-Boot] [PATCH v2 3/6] pico-imx7d: Reserve region of memory to OPTEE   Jun Nie
• [U-Boot] [PATCH v2 3/7] riscv: ae350: disable ATCPIT100 timer   Andes
• [U-Boot] [PATCH V2 3/8] dt: bcm968580xref: enable led controller   Philippe Reynes
• [U-Boot] [PATCH v2 3/9] riscv: implement IPI platform functions using SBI   Lukas Auer
• [U-Boot] [PATCH v2 3/9] riscv: implement IPI platform functions using SBI   Atish Patra
• [U-Boot] [PATCH v2 3/9] riscv: implement IPI platform functions using SBI   Bin Meng
• [U-Boot] [PATCH v2 4/4] ARM: dts: Add STMFX gpio expander support for stm32mp157c-ev1   Patrice Chotard
• [U-Boot] [PATCH v2 4/4] configs: mscc_jr2: Add network support   Horatiu Vultur
• [U-Boot] [PATCH v2 4/4] configs: socfpga: socrates: enable rtc support   Simon Goldschmidt
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Simon Goldschmidt
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Marek Vasut
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Simon Goldschmidt
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Marek Vasut
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Simon Goldschmidt
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Marek Vasut
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Simon Goldschmidt
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Simon Goldschmidt
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Masahiro Yamada
• [U-Boot] [PATCH v2 4/5] arm: socfpga: imply/default common config options   Simon Goldschmidt
• [U-Boot] [PATCH v2 4/5] configs: enable device tree support for T2080QDS   Yinbo Zhu
• [U-Boot] [PATCH v2 4/6] arm: dts: Stratix10: Modify stratix10 socdk memory node   Ley Foon Tan
• [U-Boot] [PATCH v2 4/6] dlmalloc: be compatible to tiny printf   Simon Goldschmidt
• [U-Boot] [PATCH v2 4/6] dlmalloc: be compatible to tiny printf   Simon Goldschmidt
• [U-Boot] [PATCHv2 4/6] dm: cache: add the pl310 cache controller driver   Dinh Nguyen
• [U-Boot] [PATCHv2 4/6] dm: cache: add the pl310 cache controller driver   Simon Glass
• [U-Boot] [PATCH v2 4/6] i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH v2 4/6] i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer   Marek Vasut
• [U-Boot] [PATCH v2 4/6] pico-imx7d: Add boot option for verified boot   Jun Nie
• [U-Boot] [PATCH v2 4/7] riscv: ax25: Add platform-specific Kconfig options   Andes
• [U-Boot] [PATCH V2 4/8] bcm968580xref: enable led support   Philippe Reynes
• [U-Boot] [PATCH v2 4/9] riscv: delay initialization of caches and debug UART   Lukas Auer
• [U-Boot] [PATCH v2 5/5] arm: socfpga: gen5: reduce SPL pre-reloc malloc   Simon Goldschmidt
• [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   AKASHI Takahiro
• [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   AKASHI Takahiro
• [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   AKASHI Takahiro
• [U-Boot] [PATCH v2 5/5] configs: enable eSDHC device module in T2080QDS   Yinbo Zhu
• [U-Boot] [PATCH v2 5/5] configs: enable eSDHC device module in T2080QDS   Yinbo Zhu
• [U-Boot] [PATCH v2 5/5] configs: enable eSDHC device module in T2080QDS   Yinbo Zhu
• [U-Boot] [PATCH v2 5/6] arm: socfpga: stratix10: Add cpu_has_been_warmreset()   Ley Foon Tan
• [U-Boot] [PATCHv2 5/6] ARM: socfpga: use the pl310 driver to configure the cache   Dinh Nguyen
• [U-Boot] [PATCHv2 5/6] ARM: socfpga: use the pl310 driver to configure the cache   Simon Glass
• [U-Boot] [PATCH v2 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH v2 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Marek Vasut
• [U-Boot] [PATCH v2 5/6] pico-imx7d: Add bl33 config   Jun Nie
• [U-Boot] [PATCH v2 5/6] spl: support using full malloc with SYS_MALLOC_F_LEN   Simon Goldschmidt
• [U-Boot] [PATCH v2 5/6] spl: support using full malloc with SYS_MALLOC_F_LEN   Simon Glass
• [U-Boot] [PATCH v2 5/6] spl: support using full malloc with SYS_MALLOC_F_LEN   Simon Goldschmidt
• [U-Boot] [PATCH v2 5/6] spl: support using full malloc with SYS_MALLOC_F_LEN   Simon Goldschmidt
• [U-Boot] [PATCH v2 5/7] riscv: ax25: Andes specific cache shall only support in M-mode   Andes
• [U-Boot] [PATCH V2 5/8] led: bcm6858: allow to use this driver on ARCH_963158   Philippe Reynes
• [U-Boot] [PATCH v2 5/9] riscv: add support for multi-hart systems   Lukas Auer
• [U-Boot] [PATCH v2 5/9] riscv: add support for multi-hart systems   Anup Patel
• [U-Boot] [PATCH v2 5/9] riscv: add support for multi-hart systems   Bin Meng
• [U-Boot] [PATCH v2 5/9] riscv: add support for multi-hart systems   Auer, Lukas
• [U-Boot] [PATCH v2 6/6] arm: socfpga: a10: move SPL heap size to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH v2 6/6] arm: socfpga: a10: move SPL stack size to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH v2 6/6] arm: socfpga: a10: move SPL stack size to Kconfig   Chee, Tien Fong
• [U-Boot] [PATCH v2 6/6] arm: socfpga: a10: move SPL stack size to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH v2 6/6] arm: socfpga: a10: move SPL stack size to Kconfig   Chee, Tien Fong
• [U-Boot] [PATCH v2 6/6] arm: socfpga: a10: move SPL stack size to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCHv2 6/6] configs: socfpga: add imply pl310 cache controller   Dinh Nguyen
• [U-Boot] [PATCHv2 6/6] configs: socfpga: add imply pl310 cache controller   Simon Glass
• [U-Boot] [PATCH v2 6/6] ddr: altera: Stratix10: Add ECC memory scrubbing   Ley Foon Tan
• [U-Boot] [PATCH v2 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Ismael Luceno Cortes
• [U-Boot] [PATCH v2 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Marek Vasut
• [U-Boot] [PATCH v2 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Ismael Luceno Cortes
• [U-Boot] [PATCH v2 6/6] pico-imx7d: Correct uart clock root   Jun Nie
• [U-Boot] [PATCH v2 6/6] pico-imx7d: Correct uart clock root   Otavio Salvador
• [U-Boot] [PATCH v2 6/7] riscv: dts: ae350 support SMP   Andes
• [U-Boot] [PATCH v2 6/7] riscv: dts: ae350 support SMP   Bin Meng
• [U-Boot] [PATCH v2 6/7] riscv: dts: ae350 support SMP   Bin Meng
• [U-Boot] [PATCH V2 6/8] dt: bcm63158: add led controller   Philippe Reynes
• [U-Boot] [PATCH v2 6/9] riscv: boot images passed to bootm on all harts   Lukas Auer
• [U-Boot] [PATCH v2 6/9] riscv: boot images passed to bootm on all harts   Bin Meng
• [U-Boot] [PATCH v2 7/7] riscv: ae350: enable SMP   Andes
• [U-Boot] [PATCH V2 7/8] dt: bcm963158: enable led controller   Philippe Reynes
• [U-Boot] [PATCH v2 7/9] riscv: do not rely on hart ID passed by previous boot stage   Lukas Auer
• [U-Boot] [PATCH v2 7/9] riscv: do not rely on hart ID passed by previous boot stage   Anup Patel
• [U-Boot] [PATCH v2 7/9] riscv: do not rely on hart ID passed by previous boot stage   Atish Patra
• [U-Boot] [PATCH v2 7/9] riscv: do not rely on hart ID passed by previous boot stage   Bin Meng
• [U-Boot] [PATCH v2 7/9] riscv: do not rely on hart ID passed by previous boot stage   Rick Chen
• [U-Boot] [PATCH V2 8/8] bcm963158: enable led support   Philippe Reynes
• [U-Boot] [PATCH v2 8/9] riscv: fu540: enable SMP   Lukas Auer
• [U-Boot] [PATCH v2 8/9] riscv: fu540: enable SMP   Bin Meng
• [U-Boot] [PATCH v2 9/9] riscv: qemu: enable SMP   Lukas Auer
• [U-Boot] [PATCH v2 9/9] riscv: qemu: enable SMP   Bin Meng
• [U-Boot] [PATCH v2] arm: arm64 32bit address relocation   Ibai Erkiaga
• [U-Boot] [PATCH v2] ARM: dts: i.MX6QDL: add missing spba-bus to aips-bus   Hannes Schmelzer
• [U-Boot] [PATCH v2] ARM: dts: i.MX6QDL: add missing spba-bus to aips-bus   Fabio Estevam
• [U-Boot] [PATCH v2] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Eugeniu Rosca
• [U-Boot] [PATCH v2] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Marek Vasut
• [U-Boot] [PATCH v2] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Eugeniu Rosca
• [U-Boot] [PATCH v2] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Marek Vasut
• [U-Boot] [PATCH v2] ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N   Eugeniu Rosca
• [U-Boot] [PATCH v2] arm: fix hvc call   Ibai Erkiaga Elorza
• [U-Boot] [PATCH v2] arm: fix hvc call   Tom Rini
• [U-Boot] [PATCH v2] arm: fix hvc call   Ibai Erkiaga Elorza
• [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards   Chris Packham
• [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards   Stefan Roese
• [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards   Stefan Roese
• [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards   Chris Packham
• [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards   Stefan Roese
• [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards   Leigh Brown
• [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards   Stefan Roese
• [U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards   Stefan Roese
• [U-Boot] [PATCH v2] ARM: meson: display Amlogic SoC Information   Julien Masson
• [U-Boot] [PATCH v2] ARM: meson: display Amlogic SoC Information   Neil Armstrong
• [U-Boot] [PATCH v2] arm: mvebu: theadorable: Add test for ctrl-c in PCIe PEX switch test   Stefan Roese
• [U-Boot] [PATCH v2] ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices   Dalon Westergreen
• [U-Boot] [PATCH v2] ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices   Marek Vasut
• [U-Boot] [PATCHv2] ARM: socfpga: fix data and tag latency values for pl310 cache controller   Dinh Nguyen
• [U-Boot] [PATCHv2] ARM: socfpga: fix data and tag latency values for pl310 cache controller   Marek Vasut
• [U-Boot] [PATCH v2] armv8: fsl-layerscape: update copyright info   Pankaj Bansal
• [U-Boot] [PATCH v2] board/fsl/lx2160a: Fix MC firmware loading during SD boot   Pankaj Bansal
• [U-Boot] [PATCH v2] board/fsl/lx2160a: Fix MC firmware loading during SD boot   Meenakshi Aggarwal
• [U-Boot] [PATCH v2] board/fsl/lx2160a: Fix MC firmware loading during SD boot   Pankaj Bansal
• [U-Boot] [PATCH v2] cmd: thordown: Fix spelling of download.   Vagrant Cascadian
• [U-Boot] [PATCH v2] common: spl_fit: Allow firmware image if no loadables   Abel Vesa
• [U-Boot] [PATCH v2] common: spl_fit: Allow firmware image if no loadables   Marek Vasut
• [U-Boot] [PATCH v2] common: spl_fit: Allow firmware image if no loadables   Abel Vesa
• [U-Boot] [PATCH v2] configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable   Kuldeep Singh
• [U-Boot] [PATCH V2] ddr: socfpga: Fix EMIF clear timeout   Marek Vasut
• [U-Boot] [PATCH V2] ddr: socfpga: Fix EMIF clear timeout   Simon Goldschmidt
• [U-Boot] [PATCH v2] driver: net: update copyright info   Pankaj Bansal
• [U-Boot] [PATCH v2] driver: net: update copyright info   Tom Rini
• [U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values   Heinrich Schuchardt
• [U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values   AKASHI Takahiro
• [U-Boot] [PATCH v2] env: Update env_addr for mmc environment driver   Pankit Garg
• [U-Boot] [PATCH v2] fastboot: Improve error reporting on 'getvar partition-{size, type}'   Eugeniu Rosca
• [U-Boot] [PATCH v2] fastboot: Improve error reporting on 'getvar partition-{size, type}'   Alex Kiernan
• [U-Boot] [PATCH v2] imx8mq_evk_defconfig: Enable pinctrl driver   Chris Spencer
• [U-Boot] [PATCH v2] imx8mq_evk_defconfig: Enable pinctrl driver   Peng Fan
• [U-Boot] [PATCH v2] imx8mq_evk_defconfig: Enable pinctrl driver   Chris Spencer
• [U-Boot] [PATCH v2] imx8mq_evk_defconfig: Enable pinctrl driver   Stefano Babic
• [U-Boot] [PATCH v2] MC : Report extra reserved memory to Linux   Meenakshi Aggarwal
• [U-Boot] [PATCH v2] misc: fs_loader: Replace label with DT phandle   tien.fong.chee at intel.com
• [U-Boot] [PATCH v2] mmc: correct the HS400 initialization process   BOUGH CHEN
• [U-Boot] [PATCH v2] mmc: correct the HS400 initialization process   Marek Vasut
• [U-Boot] [PATCH v2] net: phy: implement fallback mechanism for negative phy adresses   Hannes Schmelzer
• [U-Boot] [PATCH v2] net: phy: implement fallback mechanism for negative phy adresses   Michal Simek
• [U-Boot] [PATCH v2] of-platdata: improve documentation   Simon Glass
• [U-Boot] [PATCH v2] pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition   Otavio Salvador
• [U-Boot] [PATCH v2] pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition   Fabio Estevam
• [U-Boot] [PATCH v2] pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition   Otavio Salvador
• [U-Boot] [PATCH v2] pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition   Fabio Estevam
• [U-Boot] [PATCH v2] pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition   Otavio Salvador
• [U-Boot] [PATCH v2] pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition   Marek Vasut
• [U-Boot] [PATCH v2] power: axp818: Fix typo in axp_set_dldo   Jagan Teki
• [U-Boot] [PATCH V2] Revert "pico-imx7d: Add LCD support"   Joris Offouga
• [U-Boot] [PATCH V2] Revert "pico-imx7d: Add LCD support"   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH V2] Revert "pico-imx7d: Add LCD support"   jorisoffouga
• [U-Boot] [PATCH V2] Revert "pico-imx7d: Add LCD support"   Fabio Estevam
• [U-Boot] [PATCH V2] Revert "pico-imx7d: Add LCD support"   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH v2] rockchip: arm: remove no use macro   Kever Yang
• [U-Boot] [PATCH v2] rockchip: arm: remove no use macro   Philipp Tomsich
• [U-Boot] [PATCH v2] spi: cadence_qspi: Add quad write support   Jagan Teki
• [U-Boot] [PATCH v2] spi: cadence_qspi: Add quad write support   Ley Foon Tan
• [U-Boot] [PATCH v2] spi: cadence_qspi: Add quad write support   Marek Vasut
• [U-Boot] [PATCH v2] spi: cadence_qspi: Add quad write support   Ley Foon Tan
• [U-Boot] [PATCH v2] spl: spl_nand.c: Add NAND loading message   Stefan Roese
• [U-Boot] [PATCH v2] spl: spl_nand.c: Add NAND loading message   Tom Rini
• [U-Boot] [PATCH v2] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH v2] usb: host: Print device name when scanning   Marek Vasut
• [U-Boot] [PATCH v2] x86: acpi: Not every platform has serial console a first device   Bin Meng
• [U-Boot] [PATCH v2] x86: acpi: Not every platform has serial console a first device   Bin Meng
• [U-Boot] [PATCH v3 0/1] efi_loader: support BootNext and BootCurrent   AKASHI Takahiro
• [U-Boot] [PATCH v3 0/2] Load splash from FIT image (internal, external, offset)   Jonas Mark (BT-FIR/ENG1)
• [U-Boot] [PATCH v3 0/2] Load splash from FIT image (internal, external, offset)   Jonas Mark (BT-FIR/ENG1)
• [U-Boot] [PATCH v3 0/2] Load splash from FIT image (internal, external, offset)   Melin Tomas
• [U-Boot] [PATCH v3 0/3] Add Ethernet support for Poplar board   Shawn Guo
• [U-Boot] [PATCH v3 0/3] Add Ethernet support for Poplar board   Shawn Guo
• [U-Boot] [PATCH v3 0/3] ARM: meson: add p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH v3 0/3] ARM: meson: add p200 and p201 boards   Neil Armstrong
• [U-Boot] [PATCH v3 0/4] Add network support for Jaguar2 SoCs   Horatiu Vultur
• [U-Boot] [PATCH v3 0/4] arm: socfpga: enable rtc support for the socrates board   Simon Goldschmidt
• [U-Boot] [PATCH v3 0/4] arm: socfpga: stack and Kconfig cleanups   Simon Goldschmidt
• [U-Boot] [PATCHv3 0/6] dm: cache: add dm cache driver   Dinh Nguyen
• [U-Boot] [PATCH v3 0/6] spl: full-featured heap cleanups   Simon Goldschmidt
• [U-Boot] [PATCH v3 0/7] Add support for MT8516 SoC   Fabien Parent
• [U-Boot] [PATCH v3 0/8] arm: socfpga: implement proper peripheral reset handling   Marek Vasut
• [U-Boot] [PATCH v3 0/8] arm: socfpga: implement proper peripheral reset handling   Simon Goldschmidt
• [U-Boot] [PATCH v3 0/8] arm: socfpga: implement proper peripheral reset handling   Simon Goldschmidt
• [U-Boot] [PATCH v3 0/9] arm: exynos: Fix reboot on Odroid HC1   Minkyu Kang
• [U-Boot] [PATCH v3 0/9] arm: exynos: Fix reboot on Odroid HC1   Krzysztof Kozlowski
• [U-Boot] [PATCH v3 0/9] spi: Add Allwinner A31 SPI driver   Jagan Teki
• [U-Boot] [PATCH v3 00/11] SMP support for RISC-V   Lukas Auer
• [U-Boot] [PATCH v3 00/11] SMP support for RISC-V   Palmer Dabbelt
• [U-Boot] [PATCH v3 00/11] SMP support for RISC-V   Auer, Lukas
• [U-Boot] [PATCH v3 00/11] SMP support for RISC-V   Troy Benjegerdes
• [U-Boot] [PATCH v3 00/11] SMP support for RISC-V   Bin Meng
• [U-Boot] [PATCH v3 00/11] SMP support for RISC-V   Atish Patra
• [U-Boot] [PATCH v3 00/11] SMP support for RISC-V   Padmarao Begari
• [U-Boot] [PATCH v3 00/12] ARM: kirkwood: migrate to DM_USB   Chris Packham
• [U-Boot] [PATCH v3 00/12] ARM: kirkwood: migrate to DM_USB   Leigh Brown
• [U-Boot] [PATCH v3 00/13] ARM: tegra: Add support for framebuffer carveouts   Thierry Reding
• [U-Boot] [PATCH v3 00/19] ARM: tegra: Miscellaneous improvements   Thierry Reding
• [U-Boot] [PATCH v3 01/11] riscv: add infrastructure for calling functions on other harts   Lukas Auer
• [U-Boot] [PATCH v3 01/12] ARM: kirkwood: add db-88f6281-bp board   Chris Packham
• [U-Boot] [PATCH v3 01/12] ARM: kirkwood: add db-88f6281-bp board   Stefan Roese
• [U-Boot] [PATCH v3 01/13] libfdt: Add phandle generation helper   Thierry Reding
• [U-Boot] [PATCH v3 01/13] libfdt: Add phandle generation helper   Simon Glass
• [U-Boot] [PATCH v3 01/13] libfdt: Add phandle generation helper   Thierry Reding
• [U-Boot] [PATCH v3 01/13] libfdt: Add phandle generation helper   Simon Glass
• [U-Boot] [PATCH v3 01/19] ARM: tegra: Use common header for PMU declarations   Thierry Reding
• [U-Boot] [PATCH v3 02/11] riscv: import the supervisor binary interface header file   Lukas Auer
• [U-Boot] [PATCH v3 02/12] ARM: kirkwood: rename KW_CPU_WIN_BASE to MVEBU_CPU_WIN_BASE   Chris Packham
• [U-Boot] [PATCH v3 02/13] fdtdec: Add cpu_to_fdt_{addr, size}() macros   Thierry Reding
• [U-Boot] [PATCH v3 02/13] net: sunxi_emac: Add CLK support   Joe Hershberger
• [U-Boot] [PATCH v3 02/19] ARM: tegra: Guard clock code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v3 03/11] riscv: implement IPI platform functions using SBI   Lukas Auer
• [U-Boot] [PATCH v3 03/12] ARM: kirkwood: remove KW_DEFADR_PCI_IO_REMAP   Chris Packham
• [U-Boot] [PATCH v3 03/13] fdtdec: Add fdt_{addr, size}_unpack() helpers   Thierry Reding
• [U-Boot] [PATCH v3 03/13] fdtdec: Add fdt_{addr, size}_unpack() helpers   Simon Glass
• [U-Boot] [PATCH v3 03/13] fdtdec: Add fdt_{addr, size}_unpack() helpers   Thierry Reding
• [U-Boot] [PATCH v3 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Joe Hershberger
• [U-Boot] [PATCH v3 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Jagan Teki
• [U-Boot] [PATCH v3 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Joe Hershberger
• [U-Boot] [PATCH v3 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Jagan Teki
• [U-Boot] [PATCH v3 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Joe Hershberger
• [U-Boot] [PATCH v3 03/19] ARM: tegra: Guard GP pad control code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v3 04/11] riscv: delay initialization of caches and debug UART   Lukas Auer
• [U-Boot] [PATCH v3 04/12] ARM: kirkwood: switch to using mvebu mbus   Chris Packham
• [U-Boot] [PATCH v3 04/13] fdtdec: Implement fdtdec_set_phandle()   Thierry Reding
• [U-Boot] [PATCH v3 04/13] fdtdec: Implement fdtdec_set_phandle()   Simon Glass
• [U-Boot] [PATCH v3 04/13] fdtdec: Implement fdtdec_set_phandle()   Thierry Reding
• [U-Boot] [PATCH v3 04/13] fdtdec: Implement fdtdec_set_phandle()   Simon Glass
• [U-Boot] [PATCH v3 04/19] ARM: tegra: Guard memory controller code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v3 05/11] riscv: save hart ID in register tp instead of s0   Lukas Auer
• [U-Boot] [PATCH v3 05/11] riscv: save hart ID in register tp instead of s0   Bin Meng
• [U-Boot] [PATCH v3 05/11] riscv: save hart ID in register tp instead of s0   Rick Chen
• [U-Boot] [PATCH v3 05/11] riscv: save hart ID in register tp instead of s0   Anup Patel
• [U-Boot] [PATCH v3 05/12] ARM: kirkwood: remove kw_config_adr_windows   Chris Packham
• [U-Boot] [PATCH v3 05/13] clk: Use clk_get_by_index_tail()   Simon Glass
• [U-Boot] [PATCH v3 05/13] fdtdec: Implement fdtdec_add_reserved_memory()   Thierry Reding
• [U-Boot] [PATCH v3 05/19] ARM: tegra: Guard pin controller code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v3 06/11] riscv: add support for multi-hart systems   Lukas Auer
• [U-Boot] [PATCH v3 06/12] ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp   Chris Packham
• [U-Boot] [PATCH v3 06/13] fdtdec: Implement carveout support functions   Thierry Reding
• [U-Boot] [PATCH v3 06/13] mmc: sdhci: Add support for sdhci-caps-mask   Andrew F. Davis
• [U-Boot] [PATCH v3 06/19] ARM: tegra: Guard powergate code with a Kconfig symbol   Thierry Reding
• [U-Boot] [PATCH v3 07/11] riscv: boot images passed to bootm on all harts   Lukas Auer
• [U-Boot] [PATCH v3 07/12] ARM: kirkwood: enable CONFIG_DM_USB for {dream, guru, sheeva}plug   Chris Packham
• [U-Boot] [PATCH v3 07/13] fdtdec: Add Kconfig symbol for tests   Thierry Reding
• [U-Boot] [PATCH v3 07/13] fdtdec: Add Kconfig symbol for tests   Simon Glass
• [U-Boot] [PATCH v3 07/19] ARM: tegra: Fix save_boot_params() prototype   Thierry Reding
• [U-Boot] [PATCH v3 08/11] riscv: do not rely on hart ID passed by previous boot stage   Lukas Auer
• [U-Boot] [PATCH v3 08/12] ARM: kirkwood: enable CONFIG_DM_USB for dns325   Chris Packham
• [U-Boot] [PATCH v3 08/13] fdtdec: test: Fix build warning   Thierry Reding
• [U-Boot] [PATCH v3 08/13] fdtdec: test: Fix build warning   Simon Glass
• [U-Boot] [PATCH v3 08/19] ARM: tegra: Allow boards to override boot target devices   Thierry Reding
• [U-Boot] [PATCH v3 09/11] riscv: hang if relocation of secondary harts fails   Lukas Auer
• [U-Boot] [PATCH v3 09/11] riscv: hang if relocation of secondary harts fails   Bin Meng
• [U-Boot] [PATCH v3 09/11] riscv: hang if relocation of secondary harts fails   Anup Patel
• [U-Boot] [PATCH v3 09/12] ARM: kirkwood: enable CONFIG_DM_USB for ds109   Chris Packham
• [U-Boot] [PATCH v3 09/13] clk: sunxi: Implement EMAC, GMAC clocks, resets   Joe Hershberger
• [U-Boot] [PATCH v3 09/13] fdtdec: test: Use compound statement macros   Thierry Reding
• [U-Boot] [PATCH v3 09/13] fdtdec: test: Use compound statement macros   Simon Glass
• [U-Boot] [PATCH v3 09/19] ARM: tegra: Support TZ-only access to PMC   Thierry Reding
• [U-Boot] [PATCH v3 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   AKASHI Takahiro
• [U-Boot] [PATCH v3 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   AKASHI Takahiro
• [U-Boot] [PATCH v3 1/1] efi_loader: Fix serial console size detection   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/1] efi_loader: HII protocols: debug messages   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/1] efi_loader: set image_base and image_size to correct values   Heinrich Schuchardt
• [U-Boot] [PATCH V3 1/2] davinci: da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full   Adam Ford
• [U-Boot] [PATCH v3 1/3] ARM: dts: meson: add p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH v3 1/3] reset: add reset driver for HiSilicon platform   Shawn Guo
• [U-Boot] [PATCH v3 1/3] reset: add reset driver for HiSilicon platform   Joe Hershberger
• [U-Boot] [PATCH v3 1/3] reset: add reset driver for HiSilicon platform   Shawn Guo
• [U-Boot] [PATCH v3 1/4] arm: socfpga: fix comment about SPL memory layout   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/4] i2c: designware: fix reset handling on socfpga gen5   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/4] net: Add MSCC Jaguar2 network driver.   Horatiu Vultur
• [U-Boot] [PATCHv3 1/6] Documentation: dts: Add pl310 cache controller dts documentation   Dinh Nguyen
• [U-Boot] [PATCH v3 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Ismael Luceno Cortes
• [U-Boot] [PATCH v3 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Marek Vasut
• [U-Boot] [PATCH v3 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Heiko Schocher
• [U-Boot] [PATCH v3 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Heiko Schocher
• [U-Boot] [PATCH v3 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Marek Vasut
• [U-Boot] [PATCH v3 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Heiko Schocher
• [U-Boot] [PATCH v3 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Marek Vasut
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/7] cmd: part: Add 'number' sub-command   Eugeniu Rosca
• [U-Boot] [PATCH v3 1/7] cmd: part: Add 'number' sub-command   Igor Opaniuk
• [U-Boot] [PATCH v3 1/7] mmc: mtk-sd: add source_cg clock support   Fabien Parent
• [U-Boot] [PATCH v3 10/11] riscv: fu540: enable SMP   Lukas Auer
• [U-Boot] [PATCH v3 10/12] ARM: kirkwood: enable CONFIG_DM_USB for goflexhome   Chris Packham
• [U-Boot] [PATCH v3 10/13] fdtdec: test: Add carveout tests   Thierry Reding
• [U-Boot] [PATCH v3 10/13] fdtdec: test: Add carveout tests   Simon Glass
• [U-Boot] [PATCH v3 10/13] fdtdec: test: Add carveout tests   Thierry Reding
• [U-Boot] [PATCH v3 10/13] net: sun8i_emac: Add CLK and RESET support   Joe Hershberger
• [U-Boot] [PATCH v3 10/19] ARM: tegra: Workaround UDC boot issues only if necessary   Thierry Reding
• [U-Boot] [PATCH v3 11/11] riscv: qemu: enable SMP   Lukas Auer
• [U-Boot] [PATCH v3 11/12] ARM: kirkwood: enable CONFIG_DM_USB for lschlv2 and lsxhl   Chris Packham
• [U-Boot] [PATCH v3 11/12] ARM: kirkwood: enable CONFIG_DM_USB for lschlv2 and lsxhl   Michael Walle
• [U-Boot] [PATCH v3 11/13] clk: sunxi: h3: Implement EPHY CLK and RESET   Joe Hershberger
• [U-Boot] [PATCH v3 11/13] sandbox: Enable fdtdec tests   Thierry Reding
• [U-Boot] [PATCH v3 11/13] sandbox: Enable fdtdec tests   Simon Glass
• [U-Boot] [PATCH v3 11/19] ARM: tegra: Restore DRAM bank count   Thierry Reding
• [U-Boot] [PATCH v3 12/12] ARM: kirkwood: enable CONFIG_DM_USB for nas220   Chris Packham
• [U-Boot] [PATCH v3 12/13] net: sun8i_emac: Add EPHY CLK and RESET support   Joe Hershberger
• [U-Boot] [PATCH v3 12/13] p2371-2180: Add support for framebuffer carveouts   Thierry Reding
• [U-Boot] [PATCH v3 12/13] p2371-2180: Add support for framebuffer carveouts   Simon Glass
• [U-Boot] [PATCH v3 12/19] ARM: tegra: Unify Tegra186 builds   Thierry Reding
• [U-Boot] [PATCH v3 13/13] p2771-0000: Add support for framebuffer carveouts   Thierry Reding
• [U-Boot] [PATCH v3 13/13] p2771-0000: Add support for framebuffer carveouts   Simon Glass
• [U-Boot] [PATCH v3 13/19] ARM: tegra: Implement cboot_save_boot_params() in C   Thierry Reding
• [U-Boot] [PATCH v3 14/19] ARM: tegra: Implement cboot_get_ethaddr()   Thierry Reding
• [U-Boot] [PATCH v3 15/19] ARM: tegra: Enable position independent build for 64-bit   Thierry Reding
• [U-Boot] [PATCH v3 16/19] p2371-2180: Pass Ethernet MAC to the kernel   Thierry Reding
• [U-Boot] [PATCH v3 17/19] p2771-0000: Pass Ethernet MAC to the kernel   Thierry Reding
• [U-Boot] [PATCH v3 18/19] lib: Implement strndup()   Thierry Reding
• [U-Boot] [PATCH v3 19/19] ARM: tegra: Import cbootargs value from cboot DTB   Thierry Reding
• [U-Boot] [PATCH v3 2/3] ARM: board: meson: add p201 board   Mohammad Rasim
• [U-Boot] [PATCH v3 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Shawn Guo
• [U-Boot] [PATCH v3 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Joe Hershberger
• [U-Boot] [PATCH v3 2/4] arm: socfpga: put initial U-Boot stack into DDR   Simon Goldschmidt
• [U-Boot] [PATCH v3 2/4] board: mscc: jr2: Update MSCC Jaguar2 boards   Horatiu Vultur
• [U-Boot] [PATCH v3 2/4] rtc: m41t62: add compatible for m41t82   Simon Goldschmidt
• [U-Boot] [PATCHv3 2/6] ARM: pl310: Add macro's for handling tag and data latency mask   Dinh Nguyen
• [U-Boot] [PATCH v3 2/6] i2c: rcar_i2c: Add comments about registers & values   Ismael Luceno Cortes
• [U-Boot] [PATCH v3 2/6] i2c: rcar_i2c: Add comments about registers & values   Marek Vasut
• [U-Boot] [PATCH v3 2/6] i2c: rcar_i2c: Add comments about registers & values   Heiko Schocher
• [U-Boot] [PATCH v3 2/6] spl: arm: implement SPL_CLEAR_BSS_F   Simon Goldschmidt
• [U-Boot] [PATCH v3 2/7] mmc: mtk-sd: add support for MT8516   Fabien Parent
• [U-Boot] [PATCH v3 3/3] ARM: board: meson: add p200 board   Mohammad Rasim
• [U-Boot] [PATCH v3 3/3] poplar: enable Ethernet driver support   Shawn Guo
• [U-Boot] [PATCH v3 3/3] poplar: enable Ethernet driver support   Joe Hershberger
• [U-Boot] [PATCH v3 3/3] poplar: enable Ethernet driver support   Shawn Guo
• [U-Boot] [PATCH v3 3/4] arm: socfpga: imply/default common config options   Simon Goldschmidt
• [U-Boot] [PATCH v3 3/4] arm: socfpga: socrates: make rtc work   Simon Goldschmidt
• [U-Boot] [PATCH v3 3/4] net: mscc: jaguar2: Add ethenet nodes for Jaguar2.   Horatiu Vultur
• [U-Boot] [PATCH v3 3/6] dlmalloc: fix malloc range at end of ram   Simon Goldschmidt
• [U-Boot] [PATCHv3 3/6] dm: cache: Create a uclass for cache   Dinh Nguyen
• [U-Boot] [PATCHv3 3/6] dm: cache: Create a uclass for cache   Simon Glass
• [U-Boot] [PATCH v3 3/6] i2c: rcar_i2c: Fix sending of slave addresses   Ismael Luceno Cortes
• [U-Boot] [PATCH v3 3/6] i2c: rcar_i2c: Fix sending of slave addresses   Marek Vasut
• [U-Boot] [PATCH v3 3/6] i2c: rcar_i2c: Fix sending of slave addresses   Heiko Schocher
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Eugeniu Rosca
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Simon Glass
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Eugeniu Rosca
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Eugeniu Rosca
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Eugeniu Rosca
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Bajjuri, Praneeth
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Eugeniu Rosca
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Igor Opaniuk
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Eugeniu Rosca
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Tom Rini
• [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Eugeniu Rosca
• [U-Boot] [PATCH v3 3/7] mmc: mtk-sd: fix configuration option check   Fabien Parent
• [U-Boot] [PATCH v3 4/4] arm: socfpga: gen5: reduce SPL pre-reloc malloc   Simon Goldschmidt
• [U-Boot] [PATCH v3 4/4] configs: mscc_jr2: Add network support   Horatiu Vultur
• [U-Boot] [PATCH v3 4/4] configs: socfpga: socrates: enable rtc support   Simon Goldschmidt
• [U-Boot] [PATCH v3 4/6] dlmalloc: be compatible to tiny printf   Simon Goldschmidt
• [U-Boot] [PATCHv3 4/6] dm: cache: add the pl310 cache controller driver   Dinh Nguyen
• [U-Boot] [PATCH v3 4/6] i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH v3 4/6] i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer   Marek Vasut
• [U-Boot] [PATCH v3 4/6] i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer   Heiko Schocher
• [U-Boot] [PATCH v3 4/7] clk: mediatek: add support for SETCLR_INV and NO_SETCLR flags   Fabien Parent
• [U-Boot] [PATCH v3 4/7] cmd: Add 'ab_select' command   Simon Glass
• [U-Boot] [PATCH v3 4/8] reset: socfpga: add reset handling for old kernels   Marek Vasut
• [U-Boot] [PATCH v3 4/8] reset: socfpga: add reset handling for old kernels   Simon Goldschmidt
• [U-Boot] [PATCH v3 4/8] reset: socfpga: add reset handling for old kernels   Marek Vasut
• [U-Boot] [PATCH v3 4/8] reset: socfpga: add reset handling for old kernels   Simon Goldschmidt
• [U-Boot] [PATCH v3 4/8] reset: socfpga: add reset handling for old kernels   Marek Vasut
• [U-Boot] [PATCHv3 5/6] ARM: socfpga: use the pl310 driver to configure the cache   Dinh Nguyen
• [U-Boot] [PATCH v3 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH v3 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Marek Vasut
• [U-Boot] [PATCH v3 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Heiko Schocher
• [U-Boot] [PATCH v3 5/6] spl: support using full malloc with SYS_MALLOC_F_LEN   Simon Goldschmidt
• [U-Boot] [PATCH v3 5/7] clk: mediatek: add driver for MT8516   Fabien Parent
• [U-Boot] [PATCH v3 6/6] arm: socfpga: a10: move SPL heap size to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCHv3 6/6] configs: socfpga: add imply pl310 cache controller   Dinh Nguyen
• [U-Boot] [PATCH v3 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Ismael Luceno Cortes
• [U-Boot] [PATCH v3 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Marek Vasut
• [U-Boot] [PATCH v3 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Heiko Schocher
• [U-Boot] [PATCH v3 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Heiko Schocher
• [U-Boot] [PATCH v3 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Ismael Luceno Cortes
• [U-Boot] [PATCH v3 6/7] pinctrl: add driver for MT8516   Fabien Parent
• [U-Boot] [PATCH v3 7/7] ARM: MediaTek: Add support for MT8516 SoC   Fabien Parent
• [U-Boot] [PATCH v3 7/7] env: am57xx: Implement A/B boot process   Simon Glass
• [U-Boot] [PATCH v3] arm: dts: Stratix10: Add QSPI node   Ley Foon Tan
• [U-Boot] [PATCH v3] board/fsl/lx2160a: Fix MC firmware loading during SD boot   Pankaj Bansal
• [U-Boot] [PATCH v3] board/fsl/lx2160a: Fix MC firmware loading during SD boot   Prabhakar Kushwaha
• [U-Boot] [PATCH v3] cmd: clk: Handle ENODEV from clk_get_rate   Ismael Luceno Cortes
• [U-Boot] [PATCH v3] cmd: clk: Handle ENODEV from clk_get_rate   Marek Vasut
• [U-Boot] [PATCH v3] configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable   Kuldeep Singh
• [U-Boot] [PATCH v3] configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable   Prabhakar Kushwaha
• [U-Boot] [PATCH V3] ddr: socfpga: Fix EMIF clear timeout   Marek Vasut
• [U-Boot] [PATCH V3] ddr: socfpga: Fix EMIF clear timeout   Simon Goldschmidt
• [U-Boot] [PATCH v3] MC : Report extra reserved memory to Linux   Meenakshi Aggarwal
• [U-Boot] [PATCH v3] MC : Report extra reserved memory to Linux   Prabhakar Kushwaha
• [U-Boot] [PATCH v3] net: phy: implement fallback mechanism for negative phy adresses   Hannes Schmelzer
• [U-Boot] [PATCH v3] net: phy: implement fallback mechanism for negative phy adresses   Michal Simek
• [U-Boot] [PATCH v3] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH v3] usb: host: Print device name when scanning   Marek Vasut
• [U-Boot] [PATCH v3] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH v3] usb: host: Print device name when scanning   Marek Vasut
• [U-Boot] [PATCH v4 0/1] efi_loader: support BootNext and BootCurrent   AKASHI Takahiro
• [U-Boot] [PATCH v4 0/1] efi_loader: support BootNext and BootCurrent   Heinrich Schuchardt
• [U-Boot] [PATCH v4 0/4] Add Ethernet support for Poplar board   Shawn Guo
• [U-Boot] [PATCH v4 0/4] Add Ethernet support for Poplar board   Shawn Guo
• [U-Boot] [PATCH v4 0/4] Add Ethernet support for Poplar board   Joe Hershberger
• [U-Boot] [PATCH v4 0/5] Arm: meson: add support for p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH v4 0/5] Arm: meson: add support for p200 and p201 boards   Neil Armstrong
• [U-Boot] [PATCH v4 0/6] I2C fixes for the R-Car H3   Ismael Luceno Cortes
• [U-Boot] [PATCH v4 0/6] I2C fixes for the R-Car H3   Marek Vasut
• [U-Boot] [PATCH v4 0/6] I2C fixes for the R-Car H3   Ismael Luceno Cortes
• [U-Boot] [PATCH v4 0/9] arm: exynos: Fix reboot on Odroid HC1   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 0/9] arm: exynos: Fix reboot on Odroid HC1   Minkyu Kang
• [U-Boot] [PATCH v4 0/9] arm: exynos: Fix reboot on Odroid HC1   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 0/9] arm: socfpga: implement proper peripheral reset handling   Simon Goldschmidt
• [U-Boot] [PATCH v4 0/9] arm: socfpga: implement proper peripheral reset handling   Marek Vasut
• [U-Boot] [PATCHv4 00/12] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs   Z.q. Hou
• [U-Boot] [PATCH v4 00/25] MTD defconfigs/Kconfigs/Makefiles heavy cleanup   Miquel Raynal
• [U-Boot] [PATCH v4 00/25] MTD defconfigs/Kconfigs/Makefiles heavy cleanup   Miquel Raynal
• [U-Boot] [PATCH v4 00/25] MTD defconfigs/Kconfigs/Makefiles heavy cleanup   Tom Rini
• [U-Boot] [PATCH v4 00/25] MTD defconfigs/Kconfigs/Makefiles heavy cleanup   Jagan Teki
• [U-Boot] [PATCHv4 01/12] armv8: fsl-layerscpae: correct the PCIe controllers' region size   Z.q. Hou
• [U-Boot] [PATCHv4 02/12] armv8: lx2160a: add MMU table entries for PCIe   Z.q. Hou
• [U-Boot] [PATCHv4 03/12] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs   Z.q. Hou
• [U-Boot] [PATCHv4 04/12] kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for FSL_PCIE_COMPAT   Z.q. Hou
• [U-Boot] [PATCHv4 05/12] pci: ls_pcie_g4: add device tree fixups for PCI Stream IDs   Z.q. Hou
• [U-Boot] [PATCHv4 06/12] armv8: lx2160a: add PCIe controller DT nodes   Z.q. Hou
• [U-Boot] [PATCHv4 07/12] armv8: lx2160a: enable PCIe support   Z.q. Hou
• [U-Boot] [PATCH v4 07/12] drivers: spi: cf_spi: convert to driver model   Jagan Teki
• [U-Boot] [PATCH v4 07/12] drivers: spi: cf_spi: convert to driver model   Angelo Dureghello
• [U-Boot] [PATCH v4 07/12] drivers: spi: cf_spi: convert to driver model   Jagan Teki
• [U-Boot] [PATCHv4 08/12] pci: ls_pcie_g4: add Workaround for A-011577   Z.q. Hou
• [U-Boot] [PATCHv4 08/12] pci: ls_pcie_g4: add Workaround for A-011577   Z.q. Hou
• [U-Boot] [PATCHv4 09/12] dm: pci: add APIs for capability accessors   Z.q. Hou
• [U-Boot] [PATCH v4 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   AKASHI Takahiro
• [U-Boot] [PATCH v4 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/1] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/1] efi_loader: Patch non-runtime code out at ExitBootServices already   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/1] efi_loader: Patch non-runtime code out at ExitBootServices already   Ard Biesheuvel
• [U-Boot] [PATCH v4 1/1] efi_loader: Patch non-runtime code out at ExitBootServices already   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/1] efi_loader: Patch non-runtime code out at ExitBootServices already   Jonathan Gray
• [U-Boot] [PATCH v4 1/4] reset: add polarity field into struct reset_ctl   Shawn Guo
• [U-Boot] [PATCH v4 1/4] reset: add polarity field into struct reset_ctl   Joe Hershberger
• [U-Boot] [PATCH v4 1/5] ARM: board: meson: rename odroid-c2 to p200   Mohammad Rasim
• [U-Boot] [PATCH v4 1/5] ARM: board: meson: rename odroid-c2 to p200   Neil Armstrong
• [U-Boot] [PATCH v4 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Ismael Luceno Cortes
• [U-Boot] [PATCH v4 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 1/9] arm: socfpga: gen5: sync devicetrees to Linux   Simon Goldschmidt
• [U-Boot] [PATCHv4 10/12] dm: pci: add APIs for MPS and MRRS accessors   Z.q. Hou
• [U-Boot] [PATCHv4 11/12] pci: ls_pcie_g4: Add Workaround for A-011451   Z.q. Hou
• [U-Boot] [PATCHv4 11/12] pci: ls_pcie_g4: Add Workaround for A-011451   Z.q. Hou
• [U-Boot] [PATCHv4 11/12] pci: ls_pcie_g4: Add Workaround for A-011451   Bin Meng
• [U-Boot] [PATCHv4 12/12] pci: ls_pcie_g4: add Workaround for A-011452   Z.q. Hou
• [U-Boot] [PATCHv4 12/12] pci: ls_pcie_g4: add Workaround for A-011452   Z.q. Hou
• [U-Boot] [PATCHv4 12/12] pci: ls_pcie_g4: add Workaround for A-011452   Prabhakar Kushwaha
• [U-Boot] [PATCHv4 12/12] pci: ls_pcie_g4: add Workaround for A-011452   Z.q. Hou
• [U-Boot] [PATCH v4 2/4] reset: add reset driver for HiSilicon platform   Shawn Guo
• [U-Boot] [PATCH v4 2/4] reset: add reset driver for HiSilicon platform   Joe Hershberger
• [U-Boot] [PATCH v4 2/5] ARM: dts: meson: add p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH v4 2/6] i2c: rcar_i2c: Add comments about registers & values   Ismael Luceno Cortes
• [U-Boot] [PATCH v4 2/9] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Simon Goldschmidt
• [U-Boot] [PATCH v4 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy   Joe Hershberger
• [U-Boot] [PATCH v4 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy   Lukasz Majewski
• [U-Boot] [PATCH v4 3/4] net: add higmacv300 Ethernet driver for HiSilicon platform   Shawn Guo
• [U-Boot] [PATCH v4 3/5] Arm: dts: meson: add u-boot.dtsi for p200 and p201   Mohammad Rasim
• [U-Boot] [PATCH v4 3/5] Arm: dts: meson: add u-boot.dtsi for p200 and p201   Neil Armstrong
• [U-Boot] [PATCH v4 3/6] i2c: rcar_i2c: Fix sending of slave addresses   Ismael Luceno Cortes
• [U-Boot] [PATCH v4 3/9] arm: exynos: Detect revision later, when all resources are ready   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 3/9] reset: socfpga: rename membase ptr to modrst_base   Simon Goldschmidt
• [U-Boot] [PATCH v4 4/4] poplar: enable Ethernet driver support   Shawn Guo
• [U-Boot] [PATCH v4 4/4] poplar: enable Ethernet driver support   Joe Hershberger
• [U-Boot] [PATCH v4 4/5] ARM: board: meson: add p200 board   Mohammad Rasim
• [U-Boot] [PATCH v4 4/5] ARM: board: meson: add p200 board   Neil Armstrong
• [U-Boot] [PATCH v4 4/6] i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH v4 4/9] arm: exynos: odroid-xu3: Display info late to have proper type   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 4/9] arm: socfpga: gen5: deassert peripheral reset by default   Simon Goldschmidt
• [U-Boot] [PATCH v4 5/5] ARM: board: meson: add p201 board   Mohammad Rasim
• [U-Boot] [PATCH v4 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH v4 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 5/9] reset: socfpga: add reset handling for old kernels   Simon Goldschmidt
• [U-Boot] [PATCH v4 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Ismael Luceno Cortes
• [U-Boot] [PATCH v4 6/9] arm: socfpga: move gen5 SDR driver to DM   Simon Goldschmidt
• [U-Boot] [PATCH v4 6/9] regulator: Add support for ramp delay   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 7/9] mtd: rawnand: denali: add reset handling   Simon Goldschmidt
• [U-Boot] [PATCH v4 7/9] power: regulator: s2mps11: Add enable delay   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 8/9] spi: cadence_qspi: add reset handling   Simon Goldschmidt
• [U-Boot] [PATCH v4 9/9] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family   Krzysztof Kozlowski
• [U-Boot] [PATCH v4 9/9] arm: socfpga: implement proper peripheral reset   Simon Goldschmidt
• [U-Boot] [PATCH v4] arm: dts: Stratix10: Add QSPI node   Ley Foon Tan
• [U-Boot] [PATCH v4] arm: dts: Stratix10: Add QSPI node   Simon Goldschmidt
• [U-Boot] [PATCH v4] arm: dts: Stratix10: Add QSPI node   Ley Foon Tan
• [U-Boot] [PATCH v4] arm: dts: Stratix10: Add QSPI node   Simon Goldschmidt
• [U-Boot] [PATCH v4] arm: dts: Stratix10: Add QSPI node   Ley Foon Tan
• [U-Boot] [PATCH v4] board/fsl/lx2160a: Fix MC firmware loading during SD boot   Pankaj Bansal
• [U-Boot] [PATCH v4] cmd: clk: Handle ENODEV from clk_get_rate   Ismael Luceno Cortes
• [U-Boot] [PATCH v4] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH v4] usb: host: Print device name when scanning   Marek Vasut
• [U-Boot] [PATCH v5 0/5] ARM: meson: add support for p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH v5 0/5] ARM: meson: add support for p200 and p201 boards   Neil Armstrong
• [U-Boot] [PATCH v5 0/6] I2C fixes for the R-Car H3   Ismael Luceno Cortes
• [U-Boot] [PATCH v5 0/9] arm: exynos: Fix reboot on Odroid HC1   Krzysztof Kozlowski
• [U-Boot] [PATCH v5 0/9] arm: exynos: Fix reboot on Odroid HC1   Minkyu Kang
• [U-Boot] [PATCH v5 00/11] rockchip: add tpl and OPTEE support for rk3229   Kever Yang
• [U-Boot] [PATCH v5 01/11] Revert "rockchip: rk322x: ram: enable DRAM init in SPL instead of TPL"   Kever Yang
• [U-Boot] [PATCH v5 01/13] m68k: add basic set of devicetrees   Angelo Dureghello
• [U-Boot] [PATCH v5 02/11] arm: add option for TPL support in arm 32bit   Kever Yang
• [U-Boot] [PATCH v5 02/13] m68k: architecture changes to support fdt   Angelo Dureghello
• [U-Boot] [PATCH v5 03/11] arm: add a separate stack for TPL   Kever Yang
• [U-Boot] [PATCH v5 03/13] m68k: add initial dts files for all m68k boards   Angelo Dureghello
• [U-Boot] [PATCH v5 04/11] rockchip: rk322x: add CLK_EMMC_SAMPLE clock support   Kever Yang
• [U-Boot] [PATCH v5 04/13] m68k: enabling long jumps on mcf54x5 SoCs   Angelo Dureghello
• [U-Boot] [PATCH v5 05/11] rockchip: clk: rk322x: fix assert clock value   Kever Yang
• [U-Boot] [PATCH v5 05/13] configs: enable use of DT for all m68k boards   Angelo Dureghello
• [U-Boot] [PATCH v5 06/11] rockchip: rk322x: add tpl support   Kever Yang
• [U-Boot] [PATCH v5 06/13] drivers: spi: cf_spi: add Kconfig option   Angelo Dureghello
• [U-Boot] [PATCH v5 07/11] sysreset: enable driver support in SPL/TPL   Kever Yang
• [U-Boot] [PATCH v5 07/13] drivers: spi: cf_spi: convert to driver model   Angelo Dureghello
• [U-Boot] [PATCH v5 08/11] rockchip: rk322x: dts: enable uart2 for SPL/TPL   Kever Yang
• [U-Boot] [PATCH v5 08/13] configs: add DM_SPI config option   Angelo Dureghello
• [U-Boot] [PATCH v5 09/11] rockchip: evb-rk3229: remove unnecessary defines   Kever Yang
• [U-Boot] [PATCH v5 09/13] drivers: serial: mcfuart: add DT support   Angelo Dureghello
• [U-Boot] [PATCH v5 1/1] avb: add support for named persistent values   Sam Protsenko
• [U-Boot] [PATCH v5 1/5] ARM: board: meson: rename odroid-c2 to p200   Mohammad Rasim
• [U-Boot] [PATCH v5 1/6] i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed   Ismael Luceno Cortes
• [U-Boot] [PATCH v5 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC   Krzysztof Kozlowski
• [U-Boot] [PATCH v5 10/11] rockchip: evb-rk3229: add README file for OP-TEE support   Kever Yang
• [U-Boot] [PATCH v5 10/13] configs: remove CONFIG_SYS_DSPI_XX references   Angelo Dureghello
• [U-Boot] [PATCH v5 11/11] rockchip: evb-rk322x: update defconfig with tpl and optee support   Kever Yang
• [U-Boot] [PATCH v5 11/13] m68k: add OF control support to m68k   Angelo Dureghello
• [U-Boot] [PATCH v5 12/13] m68k: move dspi bus control functions into cf_spi.c driver   Angelo Dureghello
• [U-Boot] [PATCH v5 13/13] m68k: add dspi chip-select support   Angelo Dureghello
• [U-Boot] [PATCH v5 2/5] ARM: dts: meson: add p200 and p201 boards   Mohammad Rasim
• [U-Boot] [PATCH v5 2/6] i2c: rcar_i2c: Add comments about registers & values   Ismael Luceno Cortes
• [U-Boot] [PATCH v5 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35   Krzysztof Kozlowski
• [U-Boot] [PATCH v5 3/5] ARM: dts: meson: add u-boot.dtsi for p200 and p201   Mohammad Rasim
• [U-Boot] [PATCH v5 3/6] i2c: rcar_i2c: Fix sending of slave addresses   Ismael Luceno Cortes
• [U-Boot] [PATCH v5 3/9] arm: exynos: Detect revision later, when all resources are ready   Krzysztof Kozlowski
• [U-Boot] [PATCH v5 4/5] ARM: board: meson: add p200 board   Mohammad Rasim
• [U-Boot] [PATCH v5 4/6] i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH v5 4/9] arm: exynos: odroid-xu3: Display info late to have proper type   Krzysztof Kozlowski
• [U-Boot] [PATCH v5 5/6] i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer   Ismael Luceno Cortes
• [U-Boot] [PATCH v5 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision   Krzysztof Kozlowski
• [U-Boot] [PATCH v5 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover   Ismael Luceno Cortes
• [U-Boot] [PATCH v5 6/9] regulator: Add support for ramp delay   Krzysztof Kozlowski
• [U-Boot] [PATCH v5 7/9] power: regulator: s2mps11: Add enable delay   Krzysztof Kozlowski
• [U-Boot] [PATCH v5 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family   Krzysztof Kozlowski
• [U-Boot] [PATCH v5 9/9] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family   Krzysztof Kozlowski
• [U-Boot] [PATCH v5] board/fsl/lx2160a: Fix MC firmware loading during SD boot   Pankaj Bansal
• [U-Boot] [PATCH v5] board/fsl/lx2160a: Fix MC firmware loading during SD boot   Prabhakar Kushwaha
• [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Bin Meng
• [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Palmer Dabbelt
• [U-Boot] [PULL] Please pull u-boot-rockchip.git:tags/rockchip-fixes-for-2019.04   Philipp Tomsich
• [U-Boot] [PULL] U-boot-atmel 2019.04-a   Eugen.Hristev at microchip.com
• [U-Boot] [PULL] U-boot-atmel 2019.04-a   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic   Marcel Ziswiler
• [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic   Lukasz Majewski
• [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic   Hannes Schmelzer
• [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic   Hannes Schmelzer
• [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic   Marcel Ziswiler
• [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic   Hannes Schmelzer
• [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic   Lukasz Majewski
• [U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working   Peter Geis
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Ley Foon Tan
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Marek Vasut
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Simon Goldschmidt
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Simon Goldschmidt
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Marek Vasut
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Simon Goldschmidt
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Simon Goldschmidt
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Marek Vasut
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Simon Goldschmidt
• [U-Boot] [RESEND] [PATCH] arm: dts: Stratix10: Add QSPI node   Ley Foon Tan
• [U-Boot] [RESEND] [PATCH] cmd: image_info: Add checking of default FIT config   Bryan O'Donoghue
• [U-Boot] [RESEND][PATCH v1 0/4] usb: dwc2_udc_otg: Add tx_fifo_sz array support   Patrice Chotard
• [U-Boot] [RESEND][PATCH v1 1/4] usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register   Patrice Chotard
• [U-Boot] [RESEND][PATCH v1 2/4] usb: dwc2_udc_otg: Add tx_fifo_sz array support   Patrice Chotard
• [U-Boot] [RESEND][PATCH v1 2/4] usb: dwc2_udc_otg: Add tx_fifo_sz array support   Marek Vasut
• [U-Boot] [RESEND][PATCH v1 2/4] usb: dwc2_udc_otg: Add tx_fifo_sz array support   Patrice CHOTARD
• [U-Boot] [RESEND][PATCH v1 3/4] board: stm32mp1: Add tx_fifo_sz_array support   Patrice Chotard
• [U-Boot] [RESEND][PATCH v1 3/4] board: stm32mp1: Add tx_fifo_sz_array support   Marek Vasut
• [U-Boot] [RESEND][PATCH v1 3/4] board: stm32mp1: Add tx_fifo_sz_array support   Patrice CHOTARD
• [U-Boot] [RESEND][PATCH v1 3/4] board: stm32mp1: Add tx_fifo_sz_array support   Marek Vasut
• [U-Boot] [RESEND][PATCH v1 3/4] board: stm32mp1: Add tx_fifo_sz_array support   Patrick DELAUNAY
• [U-Boot] [RESEND][PATCH v1 3/4] board: stm32mp1: Add tx_fifo_sz_array support   Marek Vasut
• [U-Boot] [RESEND][PATCH v1 3/4] board: stm32mp1: Add tx_fifo_sz_array support   Patrick DELAUNAY
• [U-Boot] [RESEND][PATCH v1 4/4] ARM: dts: stm32: Remove g-tx-fifo-size from stm32mp157c-ev1-u-boot   Patrice Chotard
• [U-Boot] [Resend Patch] net: mscc: ocelot: Fix reset of the phys   Horatiu Vultur
• [U-Boot] [Resend Patch] net: mscc: ocelot: Fix reset of the phys   Daniel Schwierzeck
• [U-Boot] [RESEND PATCH] net: phy: Fix return value check phy_probe   Michal Simek
• [U-Boot] [RESEND PATCH] net: phy: Fix return value check phy_probe   Joe Hershberger
• [U-Boot] [RESEND PATCH] net: phy: Reloc next and prev pointers inside phy_drivers   Michal Simek
• [U-Boot] [RESEND PATCH] net: phy: Reloc next and prev pointers inside phy_drivers   Joe Hershberger
• [U-Boot] [RESEND PATCHv4 0/9] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs   Z.q. Hou
• [U-Boot] [RESEND PATCHv4 1/9] armv8: fsl-layerscpae: correct the PCIe controllers' region size   Z.q. Hou
• [U-Boot] [RESEND PATCHv4 2/9] armv8: lx2160a: add MMU table entries for PCIe   Z.q. Hou
• [U-Boot] [RESEND PATCHv4 3/9] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs   Z.q. Hou
• [U-Boot] [RESEND PATCHv4 4/9] kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for FSL_PCIE_COMPAT   Z.q. Hou
• [U-Boot] [RESEND PATCHv4 5/9] pci: ls_pcie_g4: add device tree fixups for PCI Stream IDs   Z.q. Hou
• [U-Boot] [RESEND PATCHv4 6/9] armv8: lx2160a: add PCIe controller DT nodes   Z.q. Hou
• [U-Boot] [RESEND PATCHv4 7/9] armv8: lx2160a: enable PCIe support   Z.q. Hou
• [U-Boot] [RESEND PATCHv4 8/9] dm: pci: add APIs for capability accessors   Z.q. Hou
• [U-Boot] [RESEND PATCHv4 9/9] dm: pci: add APIs for MPS and MRRS accessors   Z.q. Hou
• [U-Boot] [RESEND RFC PATCH v1] MLK-12883 usb: limit USB_MAX_XFER_BLK to 256   Marcel Ziswiler
• [U-Boot] [RESEND RFC PATCH v1] MLK-12883 usb: limit USB_MAX_XFER_BLK to 256   Igor Opaniuk
• [U-Boot] [RFC/RESEND 00/22] Add support for Cavium Octeon-TX CN80XX/CN81XX   Tim Harvey
• [U-Boot] [RFC/RESEND 01/22] arm: introduce ARCH_THUNDERX   Tim Harvey
• [U-Boot] [RFC/RESEND 01/22] arm: introduce ARCH_THUNDERX   Chandrakala Chavva
• [U-Boot] [RFC/RESEND 01/22] arm: introduce ARCH_THUNDERX   Tim Harvey
• [U-Boot] [RFC/RESEND 01/22] arm: introduce ARCH_THUNDERX   Tim Harvey
• [U-Boot] [RFC/RESEND 01/22] arm: introduce ARCH_THUNDERX   Suneel Garapati
• [U-Boot] [RFC/RESEND 02/22] arm: add thunderx_81xx   Tim Harvey
• [U-Boot] [RFC/RESEND 03/22] thunderx: add FDT support   Tim Harvey
• [U-Boot] [RFC/RESEND 04/22] thunderx: add thunderx register definitions and misc functions   Tim Harvey
• [U-Boot] [RFC/RESEND 05/22] thunderx: move DRAM prints to debug   Tim Harvey
• [U-Boot] [RFC/RESEND 06/22] dm: pci: add PCI SR-IOV EA support   Tim Harvey
• [U-Boot] [RFC/RESEND 07/22] fdt: add fdtdec_get_pci_bus_range   Tim Harvey
• [U-Boot] [RFC/RESEND 08/22] pci: add thunderx pci/ecam driver   Tim Harvey
• [U-Boot] [RFC/RESEND 09/22] pci: fix pce enumeration on thunderx   Tim Harvey
• [U-Boot] [RFC/RESEND 10/22] arm: include 64bit io accessors   Tim Harvey
• [U-Boot] [RFC/RESEND 11/22] gpio: add thunderx gpio driver   Tim Harvey
• [U-Boot] [RFC/RESEND 12/22] i2c: add thunderx I2C driver   Tim Harvey
• [U-Boot] [RFC/RESEND 13/22] spi: add thunderx SPI driver   Tim Harvey
• [U-Boot] [RFC/RESEND 14/22] xhci: add support for cavium thunderx XHCI   Tim Harvey
• [U-Boot] [RFC/RESEND 15/22] thunderx_81xx: add support for XHCI   Tim Harvey
• [U-Boot] [RFC/RESEND 16/22] thunderx_81xx: enable usb mass storage and usb ethernet   Tim Harvey
• [U-Boot] [RFC/RESEND 17/22] ahci: support 64bit systems   Tim Harvey
• [U-Boot] [RFC/RESEND 18/22] ahci: set n_ports from host caps   Tim Harvey
• [U-Boot] [RFC/RESEND 19/22] ahci: add support for ThunderX AHCI   Tim Harvey
• [U-Boot] [RFC/RESEND 20/22] thunderx_81xx: add AHCI support   Tim Harvey
• [U-Boot] [RFC/RESEND 21/22] net: add thunderx vnic drivers   Tim Harvey
• [U-Boot] [RFC/RESEND 22/22] pci: auto probe thunderx NIC devices   Tim Harvey
• [U-Boot] [RFC 0/8] efi_loader: rework bootefi/bootmgr   AKASHI Takahiro
• [U-Boot] [RFC 0/8] efi_loader: rework bootefi/bootmgr   AKASHI Takahiro
• [U-Boot] [RFC 0/8] efi_loader: rework bootefi/bootmgr   Heinrich Schuchardt
• [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Offouga Joris
• [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
• [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Joris Offouga
• [U-Boot] [RFC 1/2] arm64: zynqmp: add minimal include files to build a pm_cfg_obj.c   Michal Simek
• [U-Boot] [RFC 1/8] efi_loader: boottime: don't add device path protocol to image handle   AKASHI Takahiro
• [U-Boot] [RFC 1/8] efi_loader: boottime: don't add device path protocol to image handle   Heinrich Schuchardt
• [U-Boot] [RFC 1/8] efi_loader: boottime: don't add device path protocol to image handle   AKASHI Takahiro
• [U-Boot] [RFC 1/8] efi_loader: boottime: don't add device path protocol to image handle   Heinrich Schuchardt
• [U-Boot] [RFC 1/8] efi_loader: boottime: don't add device path protocol to image handle   Heinrich Schuchardt
• [U-Boot] [RFC 1/8] efi_loader: boottime: don't add device path protocol to image handle   AKASHI Takahiro
• [U-Boot] [RFC 2/2] arm64: zynqmp: install a PMU firmware config object at runtime   Michal Simek
• [U-Boot] [RFC 2/8] efi_loader: boottime: export efi_[un]load_image()   AKASHI Takahiro
• [U-Boot] [RFC 2/8] efi_loader: boottime: export efi_[un]load_image()   Heinrich Schuchardt
• [U-Boot] [RFC 3/8] efi_loader: bootmgr: return pointer and size of buffer in loading   AKASHI Takahiro
• [U-Boot] [RFC 3/8] efi_loader: bootmgr: return pointer and size of buffer in loading   Heinrich Schuchardt
• [U-Boot] [RFC 3/8] efi_loader: bootmgr: return pointer and size of buffer in loading   AKASHI Takahiro
• [U-Boot] [RFC 4/8] cmd: bootefi: move do_bootefi_bootmgr_exec() forward   AKASHI Takahiro
• [U-Boot] [RFC 4/8] cmd: bootefi: move do_bootefi_bootmgr_exec() forward   Heinrich Schuchardt
• [U-Boot] [RFC 4/8] cmd: bootefi: move do_bootefi_bootmgr_exec() forward   AKASHI Takahiro
• [U-Boot] [RFC 5/8] cmd: bootefi: carve out fdt handling   AKASHI Takahiro
• [U-Boot] [RFC 6/8] cmd: bootefi: carve out efi_selftest code from do_bootefi()   AKASHI Takahiro
• [U-Boot] [RFC 7/8] cmd: bootefi: rework do_bootefi(), using load_image API   AKASHI Takahiro
• [U-Boot] [RFC 8/8] cmd: add efibootmgr command   AKASHI Takahiro
• [U-Boot] [RFC] simple address definition method for early TPL/SPL   Kever Yang
• [U-Boot] [RFC] simple address definition method for early TPL/SPL   Kever Yang
• [U-Boot] [RFC PATCH 0/2] Add Kconfig to disable cache ops   Vignesh Raghavendra
• [U-Boot] [RFC PATCH 1/2] arch: armv8: Provide a way to disable cache maintenance ops   Vignesh Raghavendra
• [U-Boot] [RFC PATCH 1/2] arch: armv8: Provide a way to disable cache maintenance ops   Tero Kristo
• [U-Boot] [RFC PATCH 2/2] board: ti: am654: select SYS_ARCH_IS_COHERENT for arm64   Vignesh Raghavendra
• [U-Boot] [RFC PATCH] fastboot: Implement fetching uboot env variables via fastboot getvar   Priit Laes
• [U-Boot] [RFC PATCHv1 0/3] misc: pl310: add a dm cache driver   Dinh Nguyen
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Michal Simek
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Lukasz Majewski
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Lukasz Majewski
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Michal Simek
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Michal Simek
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL   Michal Simek
• [U-Boot] [RFC PATCH v1 1/2] copy the bd71837 pmic driver from NXP imx u-boot   Matti Vaittinen
• [U-Boot] [RFC PATCHv1 1/3] misc: pl310: add a misc driver for the pl310 cache controller   Dinh Nguyen
• [U-Boot] [RFC PATCHv1 1/3] misc: pl310: add a misc driver for the pl310 cache controller   Marek Vasut
• [U-Boot] [RFC PATCHv1 1/3] misc: pl310: add a misc driver for the pl310 cache controller   Dinh Nguyen
• [U-Boot] [RFC PATCHv1 1/3] misc: pl310: add a misc driver for the pl310 cache controller   Marek Vasut
• [U-Boot] [RFC PATCH v1 1/9] dtbo: also generate dtbo from dtso   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 1/9] dtbo: also generate dtbo from dtso   Michal Simek
• [U-Boot] [RFC PATCH v1 2/2] power: regulator: support ROHM BD71837 PMIC   Matti Vaittinen
• [U-Boot] [RFC PATCHv1 2/3] defconfig: socfpga_sockit_defconfig: enable L2X0_CACHE driver   Dinh Nguyen
• [U-Boot] [RFC PATCHv1 2/3] defconfig: socfpga_sockit_defconfig: enable L2X0_CACHE driver   Marek Vasut
• [U-Boot] [RFC PATCHv1 2/3] defconfig: socfpga_sockit_defconfig: enable L2X0_CACHE driver   Dinh Nguyen
• [U-Boot] [RFC PATCHv1 2/3] defconfig: socfpga_sockit_defconfig: enable L2X0_CACHE driver   Marek Vasut
• [U-Boot] [RFC PATCH v1 2/9] Makefile.lib: include /__symbols__ in dtb if OF_LIBFDT_OVERLAY is enabled   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 2/9] Makefile.lib: include /__symbols__ in dtb if OF_LIBFDT_OVERLAY is enabled   Michal Simek
• [U-Boot] [RFC PATCHv1 3/3] ARM: socfpga: let the pl310 driver configure the cache settings   Dinh Nguyen
• [U-Boot] [RFC PATCHv1 3/3] ARM: socfpga: let the pl310 driver configure the cache settings   Marek Vasut
• [U-Boot] [RFC PATCHv1 3/3] ARM: socfpga: let the pl310 driver configure the cache settings   Dinh Nguyen
• [U-Boot] [RFC PATCHv1 3/3] ARM: socfpga: let the pl310 driver configure the cache settings   Marek Vasut
• [U-Boot] [RFC PATCH v1 3/9] Makefile: Fix u-boot.itb generation when building outside the source tree   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 3/9] Makefile: Fix u-boot.itb generation when building outside the source tree   Simon Glass
• [U-Boot] [RFC PATCH v1 4/9] Makefile: Pass the board name to the FIT generator scripts   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 4/9] Makefile: Pass the board name to the FIT generator scripts   Simon Glass
• [U-Boot] [RFC PATCH v1 5/9] Makefile: use custom ITS to build u-boot.img if SPL_FIT_SOURCE or SPL_FIT_GENERATOR are set   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 5/9] Makefile: use custom ITS to build u-boot.img if SPL_FIT_SOURCE or SPL_FIT_GENERATOR are set   Simon Glass
• [U-Boot] [RFC PATCH v1 6/9] spl: fit: Allow calling spl_load_fit_image() to only get the image size   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 6/9] spl: fit: Allow calling spl_load_fit_image() to only get the image size   Michal Simek
• [U-Boot] [RFC PATCH v1 7/9] spl: fit: Add support for applying DT overlay   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 7/9] spl: fit: Add support for applying DT overlay   Michal Simek
• [U-Boot] [RFC PATCH v1 7/9] spl: fit: Add support for applying DT overlay   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 7/9] spl: fit: Add support for applying DT overlay   Michal Simek
• [U-Boot] [RFC PATCH v1 8/9] sp: fit: Allow the board to dynamically select the DTB overlays it needs.   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v1 8/9] sp: fit: Allow the board to dynamically select the DTB overlays it needs.   Michal Simek
• [U-Boot] [RFC PATCH v1 9/9] !!! TEMP !!! For demonstration only !!! DRA76: Usage of overlays in SPL   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 00/12] Add support for applications of overlays in SPL   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 00/12] Add support for applications of overlays in SPL   Michal Simek
• [U-Boot] [RFC PATCH v2 01/12] spl: fit: Add support for applying DT overlay   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 02/12] spl: fit: Make room in the FDT before applying overlays   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 03/12] spl: fit: allocate a temporary buffer to load the overlays   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 04/12] Makefile.lib: include /__symbols__ in dtb if OF_LIBFDT_OVERLAY is enabled   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 05/12] Makefile: Fix tests for CONFIG_SPL_LOAD_FIT and CONFIG_SPL_FIT_GENERATOR   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 06/12] Makefile: Fix u-boot.itb generation when building outside the source tree   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 07/12] Makefile: Pass the board name to the FIT generator scripts   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 08/12] Makefile: use custom ITS to build u-boot.img if SPL_FIT_SOURCE or SPL_FIT_GENERATOR are set   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 09/12] spl: fit: constify the output parameter of spl_fit_get_image_name()   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 10/12] spl: fit: Allow the board to tell if more images must be loaded from FIT   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 11/12] configs: am335x_evm: enable SPL_FIT_IMAGE_TINY   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH v2 12/12] !!! TEMP !!! For demonstration only !!! DRA76: Usage of overlays in SPL   Jean-Jacques Hiblot
• [U-Boot] [RFC v2 0/2] arm64: zynqmp: pass a PMUFW config object   Luca Ceresoli
• [U-Boot] [RFC v2 00/11] efi_loader: rework bootefi/bootmgr   AKASHI Takahiro
• [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   Simon Glass
• [U-Boot] [RFC v2 01/11] efi_loader: boottime: add loaded image device path protocol to image handle   AKASHI Takahiro
• [U-Boot] [RFC v2 01/11] efi_loader: boottime: add loaded image device path protocol to image handle   Heinrich Schuchardt
• [U-Boot] [RFC v2 01/11] efi_loader: boottime: add loaded image device path protocol to image handle   Heinrich Schuchardt
• [U-Boot] [RFC v2 01/11] efi_loader: boottime: add loaded image device path protocol to image handle   AKASHI Takahiro
• [U-Boot] [RFC v2 02/11] efi_loader: boottime: export efi_[un]load_image()   AKASHI Takahiro
• [U-Boot] [RFC v2 02/11] efi_loader: boottime: export efi_[un]load_image()   Heinrich Schuchardt
• [U-Boot] [RFC v2 03/11] efi_loader: device_path: handle special case of loading   AKASHI Takahiro
• [U-Boot] [RFC v2 03/11] efi_loader: device_path: handle special case of loading   Heinrich Schuchardt
• [U-Boot] [RFC v2 03/11] efi_loader: device_path: handle special case of loading   AKASHI Takahiro
• [U-Boot] [RFC v2 04/11] cmd: bootefi: carve out fdt handling from do_bootefi()   AKASHI Takahiro
• [U-Boot] [RFC v2 04/11] cmd: bootefi: carve out fdt handling from do_bootefi()   Heinrich Schuchardt
• [U-Boot] [RFC v2 04/11] cmd: bootefi: carve out fdt handling from do_bootefi()   AKASHI Takahiro
• [U-Boot] [RFC v2 05/11] cmd: bootefi: merge efi_install_fdt() and efi_process_fdt()   AKASHI Takahiro
• [U-Boot] [RFC v2 05/11] cmd: bootefi: merge efi_install_fdt() and efi_process_fdt()   Heinrich Schuchardt
• [U-Boot] [RFC v2 05/11] cmd: bootefi: merge efi_install_fdt() and efi_process_fdt()   AKASHI Takahiro
• [U-Boot] [RFC v2 06/11] cmd: bootefi: carve out efi_selftest code from do_bootefi()   AKASHI Takahiro
• [U-Boot] [RFC v2 06/11] cmd: bootefi: carve out efi_selftest code from do_bootefi()   Heinrich Schuchardt
• [U-Boot] [RFC v2 06/11] cmd: bootefi: carve out efi_selftest code from do_bootefi()   AKASHI Takahiro
• [U-Boot] [RFC v2 07/11] cmd: bootefi: move do_bootefi_bootmgr_exec() forward   AKASHI Takahiro
• [U-Boot] [RFC v2 07/11] cmd: bootefi: move do_bootefi_bootmgr_exec() forward   Heinrich Schuchardt
• [U-Boot] [RFC v2 07/11] cmd: bootefi: move do_bootefi_bootmgr_exec() forward   AKASHI Takahiro
• [U-Boot] [RFC v2 08/11] cmd: bootefi: carve out bootmgr code from do_bootefi()   AKASHI Takahiro
• [U-Boot] [RFC v2 09/11] cmd: bootefi: carve out do_boot_efi() from do_bootefi()   AKASHI Takahiro
• [U-Boot] [RFC v2 1/2] zynqmp: add minimal include files to build a pm_cfg_obj.c   Luca Ceresoli
• [U-Boot] [RFC v2 1/2] zynqmp: add minimal include files to build a pm_cfg_obj.c   Michal Simek
• [U-Boot] [RFC v2 1/2] zynqmp: add minimal include files to build a pm_cfg_obj.c   Luca Ceresoli
• [U-Boot] [RFC v2 1/2] zynqmp: add minimal include files to build a pm_cfg_obj.c   Michal Simek
• [U-Boot] [RFC v2 10/11] efi_loader: rework bootmgr/bootefi using load_image API   AKASHI Takahiro
• [U-Boot] [RFC v2 11/11] cmd: add efibootmgr command   AKASHI Takahiro
• [U-Boot] [RFC v2 11/11] cmd: add efibootmgr command   Heinrich Schuchardt
• [U-Boot] [RFC v2 11/11] cmd: add efibootmgr command   Alexander Graf
• [U-Boot] [RFC v2 2/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Luca Ceresoli
• [U-Boot] [RFC v2 2/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Michal Simek
• [U-Boot] [RFC v2 2/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Luca Ceresoli
• [U-Boot] [RFC v2 2/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Michal Simek
• [U-Boot] [SoCFPGA] co-custodianship   Marek Vasut
• [U-Boot] [SoCFPGA] co-custodianship   Stefan Roese
• [U-Boot] [SoCFPGA] co-custodianship   Tom Rini
• [U-Boot] [SoCFPGA] co-custodianship   Chee, Tien Fong
• [U-Boot] [swupdate] Re: SWUpdate - U-Boot environment library dependency   Stefano Babic
• [U-Boot] [U-Boot,01/13] board: ge: bx50v3: Enable CONFIG_DM   sbabic at denx.de
• [U-Boot] [U-Boot,02/13] board: ge: bx50v3: Enable CONFIG_DM_MMC   sbabic at denx.de
• [U-Boot] [U-Boot,03/13] board: ge: bx50v3: Enable CONFIG_DM_GPIO   sbabic at denx.de
• [U-Boot] [U-Boot, 04/13] board: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_FLASH   sbabic at denx.de
• [U-Boot] [U-Boot,05/13] board: ge: ppd: Enable CONFIG_DM   sbabic at denx.de
• [U-Boot] [U-Boot, 06/13] arm: imx: Add esdhc3/4 nodes to imx53.dtsi   sbabic at denx.de
• [U-Boot] [U-Boot,07/13] board: ge: ppd: Enable CONFIG_DM_MMC   sbabic at denx.de
• [U-Boot] [U-Boot, 08/13] board: ge: store version information in fdt   sbabic at denx.de
• [U-Boot] [U-Boot, 09/13] board: ge: bx50v3: Specific ARP timeout removed   sbabic at denx.de
• [U-Boot] [U-Boot,1/1] cmd: set CONFIG_SYS_HELP_CMD_WIDTH = 10   Tom Rini
• [U-Boot] [U-Boot,1/1] doc/git-mailrc: correct entry 'agraf'   Tom Rini
• [U-Boot] [U-Boot, 1/1] fs: ext4: do not write on filesystem with metadata_csum feature   Tom Rini
• [U-Boot] [U-Boot,1/4] ARM: fix arch/arm/dts/Makefile   Tom Rini
• [U-Boot] [U-Boot, 1/7] bcm7445: move some configuration in defconfig file   Tom Rini
• [U-Boot] [U-Boot, 10/13] board: ge: bx50v3: Network booting of fitImage with nfs rootfs   sbabic at denx.de
• [U-Boot] [U-Boot,11/13] mx53ppd: bring dock out of reset at boot   sbabic at denx.de
• [U-Boot] [U-Boot,12/13] mx53ppd: fix unsupported set command   sbabic at denx.de
• [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now   Kever Yang
• [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now   Simon Glass
• [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】【请注意，邮件由sjg at google.com代发】   Andy Yan
• [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】【请注意，邮件由sjg at google.com代发】   Simon Glass
• [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】【请注意，邮件由sjg at google.com代发】   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】【请注意，邮件由sjg at google.com代发】   Andy Yan
• [U-Boot] [U-Boot, 2/2] usb: gadget: fastboot: Dequeue the previous IN request for the current request   Eugeniu Rosca
• [U-Boot] [U-Boot,2/4] powerpc: fix arch/powerpc/dts/Makefile   Tom Rini
• [U-Boot] [U-Boot, 2/7] controlcenterdc: move some configuration in defconfig file   Tom Rini
• [U-Boot] [U-Boot, 3/4] mips: add missing dtb-y to arch/mips/dts/Makefile   Tom Rini
• [U-Boot] [U-Boot, 3/7] exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE   Tom Rini
• [U-Boot] [U-Boot, 4/4] Revert "Ensure device tree DTS is compiled"   Tom Rini
• [U-Boot] [U-Boot, 4/7] tqma6s_wru4_mmc: manage board_spi_cs_gpio correctly   Tom Rini
• [U-Boot] [U-Boot,5/7] Convert CONFIG_SF_DEFAULT_* to Kconfig   Tom Rini
• [U-Boot] [U-Boot,6/7] Convert CONFIG_DEFAULT_SPI_* to Kconfig   Tom Rini
• [U-Boot] [U-Boot,7/7] Convert CONFIG_ENV_SPI_* to Kconfig   Tom Rini
• [U-Boot] [U-Boot, RESEND, 1/3] ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard   Marcin Niestrój
• [U-Boot] [U-Boot, RESEND, 2/2] ARM: qemu-arm: enable USB boot in distro boot with UEFI   Tom Rini
• [U-Boot] [U-Boot, v1, 01/26] colibri_imx6: get rid of obsolete nospl configurations   sbabic at denx.de
• [U-Boot] [U-Boot,v1,02/26] colibri_imx6: use distro defaults   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 03/26] colibri_imx6: move console in env from header file to defconfig   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 06/26] colibri_imx6: migrate to using device tree   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 07/26] colibri_imx6: clean-up and migrate gpios to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 08/26] colibri_imx6: enable pin control driver   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 09/26] colibri_imx6: migrate i2c to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 10/26] colibri_imx6: migrate pmic and regulator to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 11/26] colibri_imx6: migrate mmc to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 12/26] colibri_imx6: migrate usb to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP   sbabic at denx.de
• [U-Boot] [U-Boot,v1,14/26] colibri_imx6: print also 64-bit IT   sbabic at denx.de
• [U-Boot] [U-Boot,v1,15/26] colibri_imx6: add distroboot support   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 17/26] colibri imx6: pf0100: reorder and cleanup message printing   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 18/26] colibri imx6: disable ri and dcd irq in uarts   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 20/26] colibri_imx6: revert fuse value set in mfgr_fuse   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 22/26] configs: colibri_imx6: Use ext4 file system by default   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 23/26] colibri_imx6: use SDP if USB serial downloader has been used   sbabic at denx.de
• [U-Boot] [U-Boot,v1,24/26] colibri_imx6: switch to zimage   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 25/26] colibri_imx6: added nreset gpio on reboot   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 26/26] board: colibri_imx6: check for and report ecc errors in fuses   sbabic at denx.de
• [U-Boot] [U-Boot, v1, 26/26] board: colibri_imx6: check for and report ecc errors in fuses   Marcel Ziswiler
• [U-Boot] [U-Boot, v1, 26/26] board: colibri_imx6: check for and report ecc errors in fuses   Stefano Babic
• [U-Boot] [U-Boot, v10, 04/10] fdt: parse "reserved-memory" for memory reservation   Eugeniu Rosca
• [U-Boot] [U-Boot, v10, 04/10] fdt: parse "reserved-memory" for memory reservation   Marek Vasut
• [U-Boot] [U-Boot, v2, 01/23] apalis_imx6: get rid of obsolete nospl configurations   sbabic at denx.de
• [U-Boot] [U-Boot,v2,02/23] apalis_imx6: use distro defaults   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 03/23] apalis_imx6: move console in env from header file to defconfig   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 06/23] apalis_imx6: migrate to using device tree   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 07/23] apalis_imx6: clean-up and migrate gpios to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot,v2,08/23] apalis_imx6: enable pin control driver   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 09/23] apalis_imx6: migrate i2c to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 1/2] common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled   Tom Rini
• [U-Boot] [U-Boot, v2, 10/23] apalis_imx6: migrate pmic and regulator to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 11/23] apalis_imx6: migrate mmc and sata to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot,v2,11/23] spl: Add a comment to spl_set_bd()   Simon Glass
• [U-Boot] [U-Boot, v2, 12/23] apalis_imx6: migrate usb to using driver model   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP   sbabic at denx.de
• [U-Boot] [U-Boot,v2,14/23] apalis_imx6: add distroboot support   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 17/23] apalis_imx6: pf0100: reorder and cleanup message printing   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 18/23] apalis_imx6: disable ri and dcd irq in uarts   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 19/23] apalis_imx6: revert fuse value set in mfgr_fuse   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 2/2] tools: fit_image: Add the loadable property to configs   Tom Rini
• [U-Boot] [U-Boot, v2, 20/23] configs: apalis_imx6: Use ext4 file system by default   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 21/23] apalis_imx6: use SDP if USB serial downloader has been used   sbabic at denx.de
• [U-Boot] [U-Boot,v2,22/23] apalis_imx6: switch to zimage   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 23/23] board: apalis_imx6: check for and report ecc errors in fuses   sbabic at denx.de
• [U-Boot] [U-Boot, V2, PATCH 1/3] ag7xxx: add initial support for s17   rosysong at rosinson.com
• [U-Boot] [U-Boot, V2, PATCH 2/3] mips: add initial support for qca956x referenced board   rosysong at rosinson.com
• [U-Boot] [U-Boot, V2, PATCH 2/3] mips: add initial support for qca956x referenced board   Daniel Schwierzeck
• [U-Boot] [U-Boot, V2, PATCH 3/3] mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X   rosysong at rosinson.com
• [U-Boot] [U-Boot, v2, RESEND] fdt: Fix FIT header verification in mkimage and conduct same checks as bootm   Tom Rini
• [U-Boot] [U-Boot, v2] armv8: Disable exception vectors in SPL by default   Tom Rini
• [U-Boot] [U-Boot,v2] cmd: thordown: Fix spelling of download.   Tom Rini
• [U-Boot] [U-Boot,v2] configs: dra7xx_evm: Remove ENV_IS_IN_FAT   Tom Rini
• [U-Boot] [U-Boot, v2] Enable expression support for CONFIG_BOARD_SIZE_LIMIT   Simon Goldschmidt
• [U-Boot] [U-Boot, v2] Enable expression support for CONFIG_BOARD_SIZE_LIMIT   Tom Rini
• [U-Boot] [U-Boot, v2] Enable expression support for CONFIG_BOARD_SIZE_LIMIT   Martin Husemann
• [U-Boot] [U-Boot, v2] Enable expression support for CONFIG_BOARD_SIZE_LIMIT   Philipp Tomsich
• [U-Boot] [U-Boot, v2] Enable expression support for CONFIG_BOARD_SIZE_LIMIT   Simon Goldschmidt
• [U-Boot] [U-Boot, v2] Enable expression support for CONFIG_BOARD_SIZE_LIMIT   Tom Rini
• [U-Boot] [U-Boot, v2] Enable expression support for CONFIG_BOARD_SIZE_LIMIT   Ismael Luceno Cortes
• [U-Boot] [U-Boot, v2] mmc: correct the HS400 initialization process   Tom Rini
• [U-Boot] [U-Boot, V3, PATCH 1/3] ag7xxx: add initial support for s17   rosysong at rosinson.com
• [U-Boot] [U-Boot, V3, PATCH 2/3] mips: add initial support for qca956x referenced board   rosysong at rosinson.com
• [U-Boot] [U-Boot, V3, PATCH 2/3] mips: add initial support for qca956x referenced board   Daniel Schwierzeck
• [U-Boot] [U-Boot, V3, PATCH 3/3] mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X   rosysong at rosinson.com
• [U-Boot] [U-Boot, V3, PATCH 3/3] mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X   Daniel Schwierzeck
• [U-Boot] [U-Boot, v4, 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 02/22] net: Kconfig: FEC: Add dependency on VF610   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 05/22] pcm052: board: Do not enable I2C2 code in the board file   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 08/22] pcm052: board: vybrid: Update the board name for BK4 device   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware   sbabic at denx.de
• [U-Boot] [U-Boot,V4,1/2] mmc: add HS400 support   Trent Piepho
• [U-Boot] [U-Boot,V4,1/2] mmc: add HS400 support   Marek Vasut
• [U-Boot] [U-Boot,V4,1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [U-Boot,V4,1/2] mmc: add HS400 support   Trent Piepho
• [U-Boot] [U-Boot, v4, 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 15/22] config: bk4: Update include/configs/bk4r1.h file   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup)   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 17/22] config: bk4: Update u-boot script to support recovery via SD card   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 20/22] pcm052: board: Add code to setup LED default states   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function   sbabic at denx.de
• [U-Boot] [U-Boot, v4, 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy   sbabic at denx.de
• [U-Boot] [U-Boot, V4, PATCH 1/1] mips: add initial support for qca956x referenced board   rosysong at rosinson.com
• [U-Boot] [U-Boot, V4, PATCH 1/1] mips: add initial support for qca956x referenced board   Daniel Schwierzeck
• [U-Boot] [U-Boot, V4, PATCH 1/1] mips: add initial support for qca956x referenced board   Daniel Schwierzeck
• [U-Boot] [U-Boot, V5, PATCH 1/3] mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X   rosysong at rosinson.com
• [U-Boot] [U-Boot, V5, PATCH 1/3] mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X   Daniel Schwierzeck
• [U-Boot] [U-Boot, V5, PATCH 2/3] mips: add initial support for qca956x referenced board   rosysong at rosinson.com
• [U-Boot] [U-Boot, V5, PATCH 3/3] ag7xxx: add initial support for s17   rosysong at rosinson.com
• [U-Boot] [U-Boot-DM] pre-reloc fdt scan for non-top-level nodes   Simon Glass
• [U-Boot] [U-Boot-DM] pre-reloc fdt scan for non-top-level nodes   Simon Glass
• [U-Boot] [U-BOOT][PATCH V3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Shyam Saini
• [U-Boot] [U-BOOT][PATCH V3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Shyam Saini
• [U-Boot] [U-BOOT][V2 PATCH] configs: icore: Fix U-Boot proper loading from nand   Shyam Saini
• [U-Boot] [U-BOOT][V3 PATCH] configs: icore: Fix U-Boot proper loading from nand   Shyam Saini
• [U-Boot] [U-BOOT][V3 PATCH] configs: icore: Fix U-Boot proper loading from nand   Fabio Estevam
• [U-Boot] [v2, 0/5] Split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v2, 1/5] Move CONFIG_FSL_ESDHC to defconfig   Y.b. Lu
• [U-Boot] [v2, 2/5] mmc: split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v2, 3/5] Convert to use fsl_esdhc_imx for i.MX platforms   Y.b. Lu
• [U-Boot] [v2, 4/5] mmc: fsl_esdhc: drop i.MX code   Y.b. Lu
• [U-Boot] [v2, 5/5] mmc: fsl_esdhc_imx: drop useless code   Y.b. Lu
• [U-Boot] [v2] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [v2] please pull u-boot-samsung master   Tom Rini
• [U-Boot] [v2] powerpc: t104xrdb: Add support of MTA9ADF1G72AZ DDR   Prabhakar Kushwaha
• [U-Boot] [V3 1/3] sunxi: Fix A33 memory initialization   Shyam Saini
• [U-Boot] [V3 1/3] sunxi: Fix A33 memory initialization   Michael Nazzareno Trimarchi
• [U-Boot] [V3 1/3] sunxi: Fix A33 memory initialization   Jagan Teki
• [U-Boot] [V3 2/3] sunxi: Don't change the rank in dram size detection in A33   Shyam Saini
• [U-Boot] [V4 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Shyam Saini
• [U-Boot] [V4 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Andre Przywara
• [U-Boot] [V4 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Michael Nazzareno Trimarchi
• [U-Boot] [V5 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Shyam Saini
• [U-Boot] [V6 PATCH 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Shyam Saini
• [U-Boot] [V6 PATCH 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Jagan Teki
• [U-Boot] [V6 PATCH 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Michael Nazzareno Trimarchi
• [U-Boot] Adding F2FS support   Juraj Vijtiuk
• [U-Boot] Adding F2FS support   Lukasz Majewski
• [U-Boot] AHCI issue on Intel Apollolake   Christian Gmeiner
• [U-Boot] Antwort: [PATCH v2] fs: fat: fix reading non-cluster-aligned root directory   Bernhard Messerklinger
• [U-Boot] Antwort: Re: [PATCH v2] net: phy: implement fallback mechanism for negative phy adresses   Hannes Schmelzer
• [U-Boot] Antwort: Re: [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic   Hannes Schmelzer
• [U-Boot] ARM: dts: k2g-evm: remove unused phy-mode property from phy node   Joe Hershberger
• [U-Boot] ARM: dts: k2g-ice: add dt node for netcp   Joe Hershberger
• [U-Boot] ARM: k2g-gp-evm: update to rgmii pinmux configuration   Joe Hershberger
• [U-Boot] ARM: k2g-ice: Add pinmux support for rgmii interface   Joe Hershberger
• [U-Boot] ARM: k2g: add a workaround to reset the phy   Joe Hershberger
• [U-Boot] arm: lib: bootm: Push the Starting kernel print to the end   Tom Rini
• [U-Boot] board/raspberrypi/rpi/MAINTAINERS   Heinrich Schuchardt
• [U-Boot] board/raspberrypi/rpi/MAINTAINERS   Matthias Brugger
• [U-Boot] board/raspberrypi/rpi/MAINTAINERS   Tom Rini
• [U-Boot] board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef   Tom Rini
• [U-Boot] changes in rk3288 code have made me unable to boot u-boot on veyron speedy   Marty E. Plummer
• [U-Boot] changes in rk3288 code have made me unable to boot u-boot on veyron speedy   Heiko Stuebner
• [U-Boot] changes in rk3288 code have made me unable to boot u-boot on veyron speedy   Marty E. Plummer
• [U-Boot] changes in rk3288 code have made me unable to boot u-boot on veyron speedy   Heiko Stuebner
• [U-Boot] Clearfog Base PCI-E not working   Владислав
• [U-Boot] Clearfog Base PCI-E not working   Влад Мао
• [U-Boot] Clearfog Base PCI-E not working   Stefan Roese
• [U-Boot] Clearfog Base PCI-E not working   Chris Packham
• [U-Boot] Clearfog Base PCI-E not working   Chris Packham
• [U-Boot] cmd: mdio: Switch to generic helpers when accessing the registers   Joe Hershberger
• [U-Boot] common: image-android-dt: Fix out-of-bounds access   Tom Rini
• [U-Boot] CONFIG_OF_EMBED   Simon Glass
• [U-Boot] CONFIG_OF_EMBED   Dalon L Westergreen
• [U-Boot] CONFIG_OF_EMBED   Simon Glass
• [U-Boot] configs: am335x_evm: Add CONFIG_BLK   Tom Rini
• [U-Boot] configs: ti: Move FIT image load address to avoid overwrite   Tom Rini
• [U-Boot] Custom SPL for im.X6UL   Araya, Jose
• [U-Boot] Custom SPL for im.X6UL   Peng Fan
• [U-Boot] Custom SPL for im.X6UL   Peng Fan
• [U-Boot] db-88f6820-amc doesn't boot on latest u-boot/master   Chris Packham
• [U-Boot] db-88f6820-amc doesn't boot on latest u-boot/master   Vignesh Raghavendra
• [U-Boot] db-88f6820-amc doesn't boot on latest u-boot/master   Chris Packham
• [U-Boot] db-88f6820-amc doesn't boot on latest u-boot/master   Chris Packham
• [U-Boot] db-88f6820-amc doesn't boot on latest u-boot/master   Vignesh Raghavendra
• [U-Boot] db-88f6820-amc doesn't boot on latest u-boot/master   Chris Packham
• [U-Boot] drivers: net: ldpaa_eth: fix resource leak   Joe Hershberger
• [U-Boot] dts: imx8qxp-mek: Add PHY post reset delay   Joe Hershberger
• [U-Boot] dts: imx8qxp-mek: Add PHY post reset delay   Anatolij Gustschin
• [U-Boot] EXT: Re: [PATCH 13/13] bootcount: i2c: Delay after writing   Ray, Ian (GE Healthcare)
• [U-Boot] Fit image   snathick techno
• [U-Boot] Fixing dfu_alt_info field after DM conversion   Fabio Estevam
• [U-Boot] Fixing dfu_alt_info field after DM conversion   Lukasz Majewski
• [U-Boot] Fixing dfu_alt_info field after DM conversion   Fabio Estevam
• [U-Boot] Fwd: Resend: Pull request for UEFI system for v2019.04-rc4 (2)   Heinrich Schuchardt
• [U-Boot] How to configure U-Boot to use dts config files.   Tommaso Corda
• [U-Boot] i.MX6 Code Consolidation suggestion/question   Adam Ford
• [U-Boot] i.MX6 Code Consolidation suggestion/question   Fabio Estevam
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Peng Fan
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Fabio Estevam
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Peng Fan
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Chris Spencer
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Peng Fan
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Stefano Babic
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Fabio Estevam
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Stefano Babic
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Fabio Estevam
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Fabio Estevam
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Stefano Babic
• [U-Boot] image: fdt: handle coalesced reserve region   Tom Rini
• [U-Boot] IMX6 NAND boot regression   Michael Nazzareno Trimarchi
• [U-Boot] IMX6 NAND boot regression   Tim Harvey
• [U-Boot] IMX6 NAND boot regression   Michael Nazzareno Trimarchi
• [U-Boot] IMX6 NAND boot regression   Michael Nazzareno Trimarchi
• [U-Boot] IMX6 NAND boot regression   Tim Harvey
• [U-Boot] IMX6 NAND boot regression   Michael Nazzareno Trimarchi
• [U-Boot] imx8qxp: Fix the reported CPU frequency   Andrejs Cainikovs
• [U-Boot] iMX8QXP MEK: no ethernet   Andrejs Cainikovs
• [U-Boot] iMX8QXP MEK: no ethernet   Anatolij Gustschin
• [U-Boot] iMX8QXP MEK: no ethernet   Stefano Babic
• [U-Boot] iMX8QXP MEK: no ethernet   Anatolij Gustschin
• [U-Boot] iMX8QXP MEK: no ethernet   Andrejs Cainikovs
• [U-Boot] iMX8QXP MEK: no ethernet   Stefano Babic
• [U-Boot] iMX8QXP MEK: no ethernet   Anatolij Gustschin
• [U-Boot] iMX8QXP MEK: no ethernet   Andrejs Cainikovs
• [U-Boot] Issues with BeagleBone Black Wireless booting off eMMC   Peter Robinson
• [U-Boot] k2g: config enable ti phy dp83867 for k2g   Joe Hershberger
• [U-Boot] lib: time: update module enable MACRO   Tom Rini
• [U-Boot] macb: MID register on SAMA5D2 series?   Alexander Dahl
• [U-Boot] macb: MID register on SAMA5D2 series?   Harini Katakam
• [U-Boot] macb: MID register on SAMA5D2 series?   Nicolas.Ferre at microchip.com
• [U-Boot] Makefile: Do not pass -E to mkimage when SPL has full fitImage support   Tom Rini
• [U-Boot] Marvell DDR training custom ODT configuration   Baruch Siach
• [U-Boot] mc : Reduce MC memory size to 128M   Joe Hershberger
• [U-Boot] mmc: Align MMC_TRACE with tiny printf   Tom Rini
• [U-Boot] mpc85xx, mpc86xx: device tree model   Prabhakar Kushwaha
• [U-Boot] mpc85xx, mpc86xx: device tree model   Tom Rini
• [U-Boot] mpc85xx, mpc86xx: device tree model   Prabhakar Kushwaha
• [U-Boot] mpc85xx, mpc86xx: device tree model   Tom Rini
• [U-Boot] mpc85xx, mpc86xx: device tree model   Heiko Schocher
• [U-Boot] mpc85xx, mpc86xx: device tree model   York Sun
• [U-Boot] net: dm: fec: Support phy-reset-post-delay property   Joe Hershberger
• [U-Boot] net: dm: fec: Support phy-reset-post-delay property   Anatolij Gustschin
• [U-Boot] net: dm: fec: Support phy-reset-post-delay property   Joe Hershberger
• [U-Boot] net: netcp: add support for phy with rgmii ids   Joe Hershberger
• [U-Boot] net: phy: Add generic helpers to access MMD PHY registers   Joe Hershberger
• [U-Boot] net: phy: aquantia: Set only autoneg on in register 4.c441   Joe Hershberger
• [U-Boot] net: phy: ar803x: Address packet drops at low traffic rate due to SmartEEE feature   Joe Hershberger
• [U-Boot] net: phy: ar803x: Clarify the configuration of the CLK_25M output pin   Joe Hershberger
• [U-Boot] net: phy: ar803x: Clarify the intention of ar8021_config   Joe Hershberger
• [U-Boot] net: phy: ar803x: Explicitly disable RGMII delays   Joe Hershberger
• [U-Boot] net: phy: ar803x: Make RGMII Tx delays actually configurable for AR8035   Joe Hershberger
• [U-Boot] net: phy: ar803x: Use common functions for RGMII internal delays   Joe Hershberger
• [U-Boot] net: phy: Fix return value check phy_probe   Joe Hershberger
• [U-Boot] net: phy: micrel: Find Micrel PHY node correctly   Joe Hershberger
• [U-Boot] net: phy: micrel: Use correct skew values on KSZ9021   Joe Hershberger
• [U-Boot] net: phy: realtek: Introduce quirk to mark RXC not stoppable   Joe Hershberger
• [U-Boot] net: phy: Reloc next and prev pointers inside phy_drivers   Joe Hershberger
• [U-Boot] net: phy: ti: use generic helpers to access MMD registers   Joe Hershberger
• [U-Boot] Odroid U3 - Upgrade to latest u-boot kernel load fails.   Anand Moon
• [U-Boot] Odroid U3 - Upgrade to latest u-boot kernel load fails.   Krzysztof Kozlowski
• [U-Boot] Odroid U3 - Upgrade to latest u-boot kernel load fails.   Anand Moon
• [U-Boot] Odroid U3 - Upgrade to latest u-boot kernel load fails.   Krzysztof Kozlowski
• [U-Boot] Odroid U3 - Upgrade to latest u-boot kernel load fails.   Anand Moon
• [U-Boot] Odroid U3 - Upgrade to latest u-boot kernel load fails.   Anand Moon
• [U-Boot] Odroid U3 - Upgrade to latest u-boot kernel load fails.   Anand Moon
• [U-Boot] paralella board support   Belisko Marek
• [U-Boot] paralella board support   Martin Husemann
• [U-Boot] passing info from SPL to U-Boot   Heiko Schocher
• [U-Boot] passing info from SPL to U-Boot   Heiko Schocher
• [U-Boot] passing info from SPL to U-Boot   Tom Rini
• [U-Boot] passing info from SPL to U-Boot   Heiko Schocher
• [U-Boot] passing info from SPL to U-Boot   Tom Rini
• [U-Boot] passing info from SPL to U-Boot   Wolfgang Denk
• [U-Boot] passing info from SPL to U-Boot   Tom Rini
• [U-Boot] passing info from SPL to U-Boot   Wolfgang Denk
• [U-Boot] passing info from SPL to U-Boot   Tom Rini
• [U-Boot] passing info from SPL to U-Boot   Wolfgang Denk
• [U-Boot] passing info from SPL to U-Boot   Heiko Schocher
• [U-Boot] passing info from SPL to U-Boot   Stefano Babic
• [U-Boot] passing info from SPL to U-Boot   Heiko Schocher
• [U-Boot] passing info from SPL to U-Boot   Tom Rini
• [U-Boot] passing info from SPL to U-Boot   Tom Rini
• [U-Boot] passing info from SPL to U-Boot   Simon Glass
• [U-Boot] passing info from SPL to U-Boot   Heiko Schocher
• [U-Boot] passing info from SPL to U-Boot   Heiko Schocher
• [U-Boot] passing info from SPL to U-Boot   Wolfgang Denk
• [U-Boot] passing info from SPL to U-Boot   Tom Rini
• [U-Boot] passing info from SPL to U-Boot   Simon Glass
• [U-Boot] passing info from SPL to U-Boot   Wolfgang Denk
• [U-Boot] passing info from SPL to U-Boot   Simon Glass
• [U-Boot] passing info from SPL to U-Boot   Philipp Tomsich
• [U-Boot] pci: Add comment to mention difference in DEVFN usage in U-Boot vs Linux   Tom Rini
• [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL   Simon Glass
• [U-Boot] Please pull ARC last minute changes for 2019.04   Alexey Brodkin
• [U-Boot] Please pull ARC last minute changes for 2019.04   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Prabhakar Kushwaha
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Prabhakar Kushwaha
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx.git master   Prabhakar Kushwaha
• [U-Boot] Please pull u-boot-mpc85xx.git master   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Krzysztof Kozlowski
• [U-Boot] Please pull u-boot-video   Anatolij Gustschin
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] Pull request: u-boot-imx u -boot-imx-201900313   Stefano Babic
• [U-Boot] Pull request: u-boot-imx u -boot-imx-201900313   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] PULL request for the UEFI subsystem for v2019.04-rc4   Heinrich Schuchardt
• [U-Boot] PULL request for the UEFI subsystem for v2019.04-rc4   Tom Rini
• [U-Boot] Pull request for UEFI system for v2019.04-rc4   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI system for v2019.04-rc4   Tom Rini
• [U-Boot] Pull request for UEFI system for v2019.04-rc5   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI system for v2019.04-rc5   Tom Rini
• [U-Boot] Pull request for UEFI system for v2019.04-rc5-2   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI system for v2019.04-rc5-2   Tom Rini
• [U-Boot] Question regarding SWUpdate ..... from command line   Stefano Babic
• [U-Boot] Question regarding SWUpdate ..... from command line   Lukasz Majewski
• [U-Boot] Questions/RFC about overlay compatible strings and device tree compression in uImage.FIT   Julius Werner
• [U-Boot] raspberrypi0w issue when change cmdline.txt -> FDT_ERR_BADMAGIC   Belisko Marek
• [U-Boot] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Tom Rini
• [U-Boot] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Simon Goldschmidt
• [U-Boot] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Tom Rini
• [U-Boot] Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"   Simon Goldschmidt
• [U-Boot] Revert "Ensure device tree DTS is compiled"   Tom Rini
• [U-Boot] Revert "Ensure device tree DTS is compiled"   Masahiro Yamada
• [U-Boot] Revert "Ensure device tree DTS is compiled"   Tom Rini
• [U-Boot] Revert "Ensure device tree DTS is compiled"   Simon Glass
• [U-Boot] Revert "Ensure device tree DTS is compiled"   Masahiro Yamada
• [U-Boot] Revert "Ensure device tree DTS is compiled"   Simon Glass
• [U-Boot] Revert "env: add spi_flash_read_env function"   Tom Rini
• [U-Boot] Riscv: CONFIG_DEFAULT_DEVICE_TREE failures   Troy Benjegerdes
• [U-Boot] Riscv: CONFIG_DEFAULT_DEVICE_TREE failures   Tom Rini
• [U-Boot] rk3399 sdram data training read gate is looping forever   Jagan Teki
• [U-Boot] RPi: Add mbrugger as board maintainer   Tom Rini
• [U-Boot] rpi: bcm2835_sdhost: occasional errors while writing   Zubair Lutfullah Kakakhel
• [U-Boot] rpi: bcm2835_sdhost: occasional errors while writing   Matthias Brugger
• [U-Boot] RPi Compute Module DTB naming scheme   Stefan Wahren
• [U-Boot] RPi Compute Module DTB naming scheme   Matthias Brugger
• [U-Boot] rsa: check that pointer checksum isn't NULL before using it   Tom Rini
• [U-Boot] RSA in U-Boot   AKASHI, Takahiro
• [U-Boot] saveenv corrupts QSPI flash with latest commit U-Boot 2019.04-rc4-00047-gcfb3e102c4   Ashish Kumar
• [U-Boot] saveenv corrupts QSPI flash with latest commit U-Boot 2019.04-rc4-00047-gcfb3e102c4   Vignesh Raghavendra
• [U-Boot] saveenv corrupts QSPI flash with latest commit U-Boot 2019.04-rc4-00047-gcfb3e102c4   Ashish Kumar
• [U-Boot] saveenv corrupts QSPI flash with latest commit U-Boot 2019.04-rc4-00047-gcfb3e102c4   Vignesh Raghavendra
• [U-Boot] saveenv corrupts QSPI flash with latest commit U-Boot 2019.04-rc4-00047-gcfb3e102c4   Ashish Kumar
• [U-Boot] saveenv corrupts QSPI flash with latest commit U-Boot 2019.04-rc4-00047-gcfb3e102c4   Vignesh Raghavendra
• [U-Boot] saveenv corrupts QSPI flash with latest commit U-Boot 2019.04-rc4-00047-gcfb3e102c4   Ashish Kumar
• [U-Boot] scan_peb ubi error sama5d36 nand flash v2019.01   Daniel Evans
• [U-Boot] scan_peb ubi error sama5d36 nand flash v2019.01   Stefan Roese
• [U-Boot] scan_peb ubi error sama5d36 nand flash v2019.01   Eugen.Hristev at microchip.com
• [U-Boot] scripts/Makefile.extrawarn: Silence more DTC warnings   Tom Rini
• [U-Boot] Secure Boot nand on IMX6DL   Michael Nazzareno Trimarchi
• [U-Boot] Short Mailing List statistics   Wolfgang Denk
• [U-Boot] spl: add size check including devicetree   Tom Rini
• [U-Boot] spl: add size check including devicetree   Simon Goldschmidt
• [U-Boot] spl: add size check including devicetree   Tom Rini
• [U-Boot] spl: add size check including devicetree   Simon Goldschmidt
• [U-Boot] spl: add size check including devicetree   Tom Rini
• [U-Boot] spl: add size check including devicetree   Simon Goldschmidt
• [U-Boot] STM32H7-EVAL Ethernet support   Sergei Poselenov
• [U-Boot] Subject   Eugeniu Rosca
• [U-Boot] Subject   Paul Kocialkowski
• [U-Boot] Subject   Marek Vasut
• [U-Boot] Subject   Eugeniu Rosca
• [U-Boot] SUNXI : CONFIG_VIDEO_SUNXI is never set   Arjan van Vught
• [U-Boot] SUNXI : CONFIG_VIDEO_SUNXI is never set   Chen-Yu Tsai
• [U-Boot] SUNXI : CONFIG_VIDEO_SUNXI is never set   Arjan van Vught
• [U-Boot] SUNXI : setenv video-mode not working   Arjan van Vught
• [U-Boot] Sunxi H5 and CONFIG_ENV_IS_IN_MMC problem   g4 at novadsp.com
• [U-Boot] Sunxi H5 and CONFIG_ENV_IS_IN_MMC problem   Jack Mitchell
• [U-Boot] Sunxi H5 and CONFIG_ENV_IS_IN_MMC problem   g4 at novadsp.com
• [U-Boot] test: Update test-imagetools.sh to match new syntax   Tom Rini
• [U-Boot] tools: board config CONFIG_SYS_BOOTM_LEN is being ignored   Philipp Puschmann
• [U-Boot] tools: board config CONFIG_SYS_BOOTM_LEN is being ignored   Philipp Puschmann
• [U-Boot] U-Boot doesn't detect Pine64-LTS MMC   AndroidT Tester
• [U-Boot] UCLASS_MISC bug   Sergey Kubushyn
• [U-Boot] UCLASS_MISC bug   Jean-Jacques Hiblot
• [U-Boot] UCLASS_MISC bug   Simon Glass
• [U-Boot] UCLASS_MISC bug   Jean-Jacques Hiblot
• [U-Boot] UCLASS_MISC bug   Jean-Jacques Hiblot
• [U-Boot] Unable to compile U-Boot for Tegra K1 with modified SPL_TEXT_BASE   Embedded Engineer
• [U-Boot] Update git on git.denx.de   Heinrich Schuchardt
• [U-Boot] USB to Ethernet adapter   Araya, Jose
• [U-Boot] ut dm pch sandbox test failures   Simon Glass
• [U-Boot] Where to add maintainers for pwm?   Micke Prag
• [U-Boot] Where to add maintainers for pwm?   Tom Rini
• [U-Boot] X850 V1.3 hat for Raspberry Pi 3 is not working with u-boot   Guillaume GARDET