[U-Boot] [PATCH 2/2] armv8: ls1088a: add icid setup for platform devices
laurentiu.tudor at nxp.com
laurentiu.tudor at nxp.com
Wed Mar 20 14:31:27 UTC 2019
From: Laurentiu Tudor <laurentiu.tudor at nxp.com>
Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, sec. The ICID macros for SEC needed to be adapted because
the format of the registers is different. Also, the initial static ICID
allocation left SEC out so update it by grabbing an ICID from the range
allocated to PCI and use it for SEC.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor at nxp.com>
---
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 +
.../arm/cpu/armv8/fsl-layerscape/ls1088_ids.c | 31 +++++++++++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 4 ++
.../asm/arch-fsl-layerscape/fsl_icid.h | 43 ++++++++++++++++---
.../asm/arch-fsl-layerscape/stream_id_lsch3.h | 4 +-
board/freescale/ls1088a/ls1088a.c | 4 ++
6 files changed, 80 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index e9bc987a9c..86d572ea28 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -47,4 +47,5 @@ endif
ifneq ($(CONFIG_ARCH_LS1088A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o
+obj-y += icid.o ls1088_ids.o
endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
new file mode 100644
index 0000000000..8f12a664d0
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+ SET_SDHC_ICID(FSL_SDMMC_STREAM_ID),
+ SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+ SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+ SET_SATA_ICID(1, "fsl,ls1088a-ahci", FSL_SATA1_STREAM_ID),
+ SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+ SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+ SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+ SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+ SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+ SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+ SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+ SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+ SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+ SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+ SET_SEC_DECO_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+ SET_SEC_DECO_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
+
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 06f3edb302..cd91329edc 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -332,6 +332,10 @@ void fsl_lsch3_early_init_f(void)
if (fsl_check_boot_mode_secure() == 1)
bypass_smmu();
#endif
+
+#ifdef CONFIG_ARCH_LS1088A
+ set_icids();
+#endif
}
/* Get VDD in the unit mV from voltage ID */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
index f971af8d26..d1ad171bde 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -38,6 +38,7 @@ void fdt_fixup_icid(void *blob);
.reg_addr = addr, \
}
+#ifdef CONFIG_FSL_LSCH2
#define SET_SCFG_ICID(compat, streamid, name, compataddr) \
SET_ICID_ENTRY(compat, streamid, (((streamid) << 24) | (1 << 23)), \
offsetof(struct ccsr_scfg, name) + CONFIG_SYS_FSL_SCFG_ADDR, \
@@ -92,12 +93,44 @@ void fdt_fixup_icid(void *blob);
#define SET_FMAN_ICID_ENTRY(_port_id, streamid) \
{ .port_id = (_port_id), .icid = (streamid) }
+#define SEC_ICID_REG_VAL(streamid) (((streamid) << 16) | (streamid))
+
#define SET_SEC_QI_ICID(streamid) \
- SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \
+ SET_ICID_ENTRY("fsl,sec-v4.0", SEC_ICID_REG_VAL(streamid), \
0, offsetof(ccsr_sec_t, qilcr_ls) + \
CONFIG_SYS_FSL_SEC_ADDR, \
CONFIG_SYS_FSL_SEC_ADDR)
+extern struct fman_icid_id_table fman_icid_tbl[];
+extern int fman_icid_tbl_sz;
+
+#else /* CONFIG_FSL_LSCH2 */
+
+#define SET_GUR_ICID(compat, streamid, name, compataddr) \
+ SET_ICID_ENTRY(compat, streamid, (streamid << 24), \
+ offsetof(struct ccsr_gur, name) + CONFIG_SYS_FSL_GUTS_ADDR, \
+ compataddr)
+
+#define SET_USB_ICID(usb_num, compat, streamid) \
+ SET_GUR_ICID(compat, streamid, usb##usb_num##_amqr,\
+ CONFIG_SYS_XHCI_USB##usb_num##_ADDR)
+
+#define SET_SATA_ICID(sata_num, compat, streamid) \
+ SET_GUR_ICID(compat, streamid, sata##sata_num##_amqr, \
+ AHCI_BASE_ADDR##sata_num)
+
+#define SET_SDHC_ICID(streamid) \
+ SET_GUR_ICID("fsl,esdhc", streamid, sdmm1_amqr,\
+ CONFIG_SYS_FSL_ESDHC_ADDR)
+
+#define SET_QE_ICID(streamid) \
+ SET_GUR_ICID("fsl,qe", streamid, misc3_amqr,\
+ QE_BASE_ADDR)
+
+#define SEC_ICID_REG_VAL(streamid) ((streamid) << 24)
+
+#endif /* !CONFIG_FSL_LSCH2 */
+
#define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \
SET_ICID_ENTRY( \
(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT && \
@@ -106,24 +139,22 @@ void fdt_fixup_icid(void *blob);
? NULL \
: "fsl,sec-v4.0-job-ring"), \
streamid, \
- (((streamid) << 16) | (streamid)), \
+ SEC_ICID_REG_VAL(streamid), \
offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \
CONFIG_SYS_FSL_SEC_ADDR, \
FSL_SEC_JR##jr_num##_BASE_ADDR)
#define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \
- SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+ SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \
CONFIG_SYS_FSL_SEC_ADDR, 0)
#define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \
- SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+ SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \
CONFIG_SYS_FSL_SEC_ADDR, 0)
extern struct icid_id_table icid_tbl[];
-extern struct fman_icid_id_table fman_icid_tbl[];
extern int icid_tbl_sz;
-extern int fman_icid_tbl_sz;
#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index e017d8b558..508f697523 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -80,8 +80,10 @@
#define FSL_DMA_STREAM_ID 5
#endif
+#define FSL_SEC_STREAM_ID 7
+
/* PCI - programmed in PEXn_LUT */
-#define FSL_PEX_STREAM_ID_START 7
+#define FSL_PEX_STREAM_ID_START 8
#ifdef CONFIG_ARCH_LX2160A
#define FSL_PEX_STREAM_ID_NUM (0x100)
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index 6d11a134dc..7fde358325 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -20,6 +20,7 @@
#include <hwconfig.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
#include "../common/qixis.h"
#include "ls1088a_qixis.h"
@@ -768,6 +769,9 @@ int ft_board_setup(void *blob, bd_t *bd)
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);
#endif
+
+ fdt_fixup_icid(blob);
+
if (is_pb_board())
fixup_ls1088ardb_pb_banner(blob);
--
2.17.1
More information about the U-Boot
mailing list