[U-Boot] [PATCH v3 3/6] i2c: rcar_i2c: Fix sending of slave addresses
Ismael Luceno Cortes
ismael.luceno at silicon-gears.com
Wed Mar 6 10:46:32 UTC 2019
Do the reset before clearing the MSR, otherwise it may result in a read
or write operation instead if the start condition is repeated.
Signed-off-by: Ismael Luceno <ismael.luceno at silicon-gears.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas at gmail.com>
---
drivers/i2c/rcar_i2c.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c
index d7b27204cb..a88fbcf34f 100644
--- a/drivers/i2c/rcar_i2c.c
+++ b/drivers/i2c/rcar_i2c.c
@@ -134,9 +134,11 @@ static int rcar_i2c_set_addr(struct udevice *dev, u8 chip, u8 read)
}
writel((chip << 1) | read, priv->base + RCAR_I2C_ICMAR);
- writel(0, priv->base + RCAR_I2C_ICMSR);
+ /* Reset */
writel(RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_MIE | RCAR_I2C_ICMCR_ESG,
priv->base + RCAR_I2C_ICMCR);
+ /* Clear Status */
+ writel(0, priv->base + RCAR_I2C_ICMSR);
ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMSR, mask,
true, 100, true);
--
2.19.1
More information about the U-Boot
mailing list