[U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata to using driver model

[Marcel Ziswiler]

Hi Soeren

On Fri, 2019-03-01 at 13:20 +0100, Soeren Moch wrote:
> 
> On 25.02.19 11:39, Soeren Moch wrote:
> > On 08.02.19 18:12, Marcel Ziswiler wrote:
> > > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > > 
> > > Migrate MMC and SATA to using driver model.
> > > 
> > > While at it also enable SCSI driver model.
> > > 
> > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > [also reply to v2 of this series to avoid that this gets lost in
> > patchwork]
> > 
> > Hi Marcel,
> > 
> > Thank you for providing this solution to keep SATA working on i.MX6
> > under DM_SCSI.
> > I also want to use this on a tbs2910 board, there was a long list
> > of
> > other boards needing this functionality [1].
> > 
> > Can you implement the UCLASS at a more general place, e.g.
> > drivers/ata/dwc_ahsata.c directly, instead of your board file? So
> > this
> > functionality could easily be enabled for other boards.
> > 
> > Thank you,
> > Soeren
> > 
> > [1] 
> > https://lists.denx.de/pipermail/u-boot/2018-November/349368.html
> > 
> > 
> Since there was no feedback on this so far, I sent a proposal here:
> https://lists.denx.de/pipermail/u-boot/2019-March/360521.html

Yeah, sorry. I got trapped at the Embedded World in Nürnberg and your
message disappeared in the spew of emails I just now managed to get on
top off again. I will give your proposal a try and will re-work my
patch set accordingly. Thanks for cleaning up this mess!

> Regards,
> Soeren

Cheers

Marcel