[U-Boot] [PATCH v2] imx8mq_evk_defconfig: Enable pinctrl driver

[Chris Spencer]

On Mon, 4 Feb 2019 at 10:05, Chris Spencer <spencercw at gmail.com> wrote:
> From: Chris Spencer <christopher.spencer at sea.co.uk>
>
> The Ethernet controller is not able to initialise correctly without the
> pinctrl driver.
>
> This config setting was enabled in the initial version of this file,
> but was removed by a savedefconfig resync because the parameter did not
> actually exist at that point.
>
> Fixes: 1bac199e8c87 ("configs: Resync with savedefconfig")
> Signed-off-by: Chris Spencer <christopher.spencer at sea.co.uk>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> ---
> Depends on this patch: https://patchwork.ozlabs.org/patch/1031817/
>
> Changes in v2:
> - Added Fabio's Reviewed-by.
> - Corrected From address.

Since there hasn't been any activity on the i.MX8MM patch series for a
while, I wonder if the pinctrl driver [1] could be committed in
isolation? This patch could then be applied so we can get the Ethernet
working on the i.MX8MQ.

Thanks,
Chris

[1] https://patchwork.ozlabs.org/patch/1031817/