[U-Boot] IMX6 NAND boot regression

[Michael Nazzareno Trimarchi]

Hi Tim

On Tue, Mar 5, 2019 at 5:54 PM Tim Harvey <tharvey at gateworks.com> wrote:
>
> On Tue, Mar 5, 2019 at 8:41 AM Michael Nazzareno Trimarchi
> <michael at amarulasolutions.com> wrote:
> >
> > HI all
> >
> > On Mon, Feb 4, 2019 at 7:14 PM Tim Harvey <tharvey at gateworks.com> wrote:
> > >
> > > On Sat, Feb 2, 2019 at 5:30 AM Adam Ford <aford173 at gmail.com> wrote:
> > > >
> > > > On Sat, Feb 2, 2019 at 12:29 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
> > > > >
> > > > > +Adam, Shyam
> > > > >
> > > > > On Sat, 2 Feb, 2019, 8:49 AM Stefan Agner <stefan.agner at toradex.com wrote:
> > > > >
> > > > > > Hi Tim,
> > > > > >
> > > > > > On 02.02.19 03:32, Tim Harvey wrote:
> > > > > > > Stefan,
> > > > > > >
> > > > > > > I'm trying to track down an IMX6 SPL NAND boot regression that started
> > > > > > > in v2018.07 with your patch series to mxs_nand.
> > > > > >
> > > > > > I am sorry about that. Unfortunately I did not had a design at hand where
> > > > > > I was able to test the NAND driver in SPL...
> > > > > >
> > > > > > >
> > > > > > > I bisected it back to '5346c31e305a37d39f535cc0d5ae87d8b7e81230 mtd:
> > > > > > > nand: mxs_nand: use self init'. With this particular patch nand bbt
> > > > > > > scanning would crash the board because of nand_chip.scan_btt not being
> > > > > > > assigned. This was later fixed in
> > > > > > > '96d0be07e7498e7174daa6f3b56fc807b9feb71d MTD: nand: mxs_nand_spl: Fix
> > > > > > > empty function pointer for BBT' but cherry-picking that on top of
> > > > > > > 5346c31 fixes the immediate crash while scanning but then I find that
> > > > > > > mxs_read_page_ecc() hangs on the 4th page of reading u-boot.img from
> > > > > > > the NAND. This gets worse 2 patches later where in
> > > > > > > '28897e8d21f8e197e259a91c693de09cd81f2d5a: mtd: nand: mxs_nand: use
> > > > > > > structure for BCH geometry' I find that the first byte of every page
> > > > > > > read is wrong because mxs_nand_swap_block_mark() is getting called on
> > > > > > > the page which swaps the first bytes with oob.
> > > > > > >
> > > > > > > There are several IMX6 boards out there using both NAND and SPL I
> > > > > > > believe that I would assume were broken by this series. Any ideas on
> > > > > > > the proper resolution?
> > > > > >
> > > > >
> > > > > Look like 2017.03 can be stable boot from nand as for as my test is concern.
> > > > >
> > > > > We are also trying hard using git bisect, but seems like multiple breakings.
> > > > >
> > > > > Will keep posted if something move further.
> > > >
> > > >
> > > > From a different thread, someone was able to test these patches and
> > > > found they fixed their booting issues:
> > > >
> > > >  There was a broken function pointer here that was fixed and applied
> > > >  the imx-master, but pending merge with master
> > > >  http://patchwork.ozlabs.org/patch/1019440/
> > >
> > > right, this one was the 96d0be07 merged upstream already. I'm not
> > > clear how any NAND SPL would have worked after Sefan's series back in
> > > June without this one.
> > >
> >
> > >>SPL: board_init_r()
> > spl_init
> > Trying to boot from NAND
> > spl: nand - using hw ecc
> > 0x2c:0xdc erasesize=262144 (>>18)
> > writesize=4096 (>>12)
> > oobsize=224
> > chipsize=536870912
> > nand_spl_load_image offset:0x00200000 len:64 page:512
> > SPL: payload image: U-Boot 2019.04-rc3-dirty for imx� load addr:
> > 0x177fffc0 size: 635435
> > nand_spl_load_image offset:0x00200000 len:635435 page:512
> > is_badblock offs=0x00240000 block:9 page:576
> > is_badblock offs=0x00280000 block:10 page:640
> > Jumping to U-Boot
> > loaded - jumping to U-Boot...
> > image entry point: 0x17800000
> >
> > I'm stuck here. Booting from mmc is fine
> >
> > Michael
>
> Michael,
>
> What code are you running (git sha) and what board?
>
> Make sure you have 04568bd0b6 MTD: nand: mxs_nand: Allow driver to
> auto setup ECC in SPL
>

Top of master and I have that commit included. Can I know one imx6 board now
that can boot from Nand?

Michael

> Tim



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |