[U-Boot] [PATCH v2 1/3] ppc: t2080qds: add usb node

Yinbo Zhu yinbo.zhu at nxp.com
Tue Mar 26 03:12:48 UTC 2019


From: Yinbo Zhu <yinbo.zhu at nxp.com>

This patch is to add usb node for t2080qds

Signed-off-by: Yinbo Zhu <yinbo.zhu at nxp.com>
---
Change in v2:
		add York Sun for reviewing the patches set. 

 arch/powerpc/dts/t2080.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/powerpc/dts/t2080.dtsi b/arch/powerpc/dts/t2080.dtsi
index f895dda4d7..666601ed49 100644
--- a/arch/powerpc/dts/t2080.dtsi
+++ b/arch/powerpc/dts/t2080.dtsi
@@ -68,5 +68,24 @@
 			bus-width = <4>;
 			voltage-ranges = <1800 1800 3300 3300>;
 		};
+
+		usb0: usb at 210000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x210000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x2 0 0>;
+			phy_type = "utmi";
+		};
+
+		usb1: usb at 211000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x211000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <45 0x2 0 0>;
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
 	};
 };
-- 
2.17.1



More information about the U-Boot mailing list