[U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic

[Hannes Schmelzer]

On 3/25/19 5:07 PM, Marcel Ziswiler wrote:
> Hi Stefano
>
> On Wed, 2019-03-13 at 08:28 +0000, sbabic at denx.de wrote:
>>> The phy_connect_dev(...) function from phy.c does all the handling
>>> (inclusive catching fixed-link).
>>> So we drop here the single steps and call just
>>> phy_connect_dev(...).
>>> Signed-off-by: Hannes Schmelzer <hannes.schmelzer at br-automation.com
>>> Acked-by: Joe Hershberger <joe.hershberger at ni.com>
>> Applied to u-boot-imx, master, thanks !
>>
>> Best regards,
>> Stefano Babic
> Unfortunately, this commit broke Ethernet on the Vybrid. When re-basing
> my Colibri VF50/VF61 clean-up patch set ("colibri vybrid fixes, device
> tree enablement and driver model conversion") I noticed that Ethernet
> no longer works giving the following error messages:
>
> Net:   Could not get PHY for FEC0: addr -19
> eth-1: fec at 400d1000
> Colibri VFxx # dhcp
> Could not get PHY for FEC0: addr -19
> Could not get PHY for FEC0: addr -19
> Could not get PHY for FEC0: addr -19
> Could not get PHY for FEC0: addr -19
> No ethernet found.
> Could not get PHY for FEC0: addr -19
> Colibri VFxx #
>
> Bisecting points to this commit and reverting it indeed makes it work
> again.
>
> Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)?
>
> Cheers
>
> Marcel
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
Hi Marcel,
does this board use DM ? which defconfig uses the board?

cheers,
Hannes