[U-Boot] [PATCH 5/5] pico-imx7d: Add bl33 config

[Otavio Salvador]

On Wed, Mar 27, 2019 at 8:59 AM Jun Nie <jun.nie at linaro.org> wrote:
>
> Fabio Estevam <festevam at gmail.com> 于2019年3月27日周三 下午7:52写道：
> >
> > Hi Jun,
> >
> > On Tue, Mar 26, 2019 at 6:21 AM Jun Nie <jun.nie at linaro.org> wrote:
> > >
> > > Add default configuration to run u-boot as BL33 in the boot flow case
> > > of ATF(ARM Trusted Firmware) -> OPTEE -> U-boot.
> > >
> > > Signed-off-by: Jun Nie <jun.nie at linaro.org>
> > > ---
> > >  board/technexion/pico-imx7d/imximage-512MB.cfg | 95 ++++++++++++++++++++++++++
> >
> > This looks like a step in the wrong direction.
> >
> > We have SPL support that can handle both 512MB and 1GB variants.
> >
> > Why do we need to to go back to DCD table?
>
> For ATF -> OPTEE -> U-BOOT case, we cannot run SPL.

Why? the SPL might need to be changed but it should be doable.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854          Mobile: +1 (347) 903-9750