[U-Boot] [PATCH v2] imx8mq_evk_defconfig: Enable pinctrl driver

[Stefano Babic]

On 11/03/19 18:36, Chris Spencer wrote:
> On Sat, 2 Mar 2019 at 06:27, Peng Fan <peng.fan at nxp.com> wrote:
>>> On Mon, 4 Feb 2019 at 10:05, Chris Spencer <spencercw at gmail.com> wrote:
>>>> From: Chris Spencer <christopher.spencer at sea.co.uk>
>>>>
>>>> The Ethernet controller is not able to initialise correctly without
>>>> the pinctrl driver.
>>>>
>>>> This config setting was enabled in the initial version of this file,
>>>> but was removed by a savedefconfig resync because the parameter did
>>>> not actually exist at that point.
>>>>
>>>> Fixes: 1bac199e8c87 ("configs: Resync with savedefconfig")
>>>> Signed-off-by: Chris Spencer <christopher.spencer at sea.co.uk>
>>>> Reviewed-by: Fabio Estevam <festevam at gmail.com>
>>>> ---
>>>> Depends on this patch:
>>>>
>>> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpat
>>>>
>>> chwork.ozlabs.org%2Fpatch%2F1031817%2F&data=02%7C01%7Cpeng.f
>>> an%40n
>>>>
>>> xp.com%7Cffae7c0ab2494a20159008d69e40ed2d%7C686ea1d3bc2b4c6fa92
>>> cd99c5c
>>>>
>>> 301635%7C0%7C0%7C636870399030578148&sdata=0tJenqE8zP4dFhLs
>>> HJJ5WO3n
>>>> Tmiyz%2FAZWeclKFp8wso%3D&reserved=0
>>>>
>>>> Changes in v2:
>>>> - Added Fabio's Reviewed-by.
>>>> - Corrected From address.
>>>
>>> Since there hasn't been any activity on the i.MX8MM patch series for a while,
>>> I wonder if the pinctrl driver [1] could be committed in isolation? This patch
>>> could then be applied so we can get the Ethernet working on the i.MX8MQ.
>>>
>>
>> The blocking issue for i.MX8MM is clock part, for the pinctrl that
>> could be reused by i.MX8MQ, I think it could be committed, but need Stefano
>> to decide.
>>
>> Regards,
>> Peng.
> 
> Any thoughts on this, Stefano? Would be good to get the pinctrl driver
> + defconfig change into 2019.04 if we can.
> 

Fine with me - I have picked up pinctrl driver (pathc 19/20) and this
one for my last PR to Tom before release.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================