[U-Boot] [ANN] U-Boot v2019.04-rc3 released

[Jagan Teki]

On Fri, Mar 8, 2019 at 11:32 PM Peter Robinson <pbrobinson at gmail.com> wrote:
>
> Hey Tom and Jagan,
>
> > Hey all,
> >
> > So it's release day and I've put up v2019.04-rc3, I've updated git and
> > the tarballs are also up now.
> >
> > Thanks again to having signed tags, between -rc2 and -rc3 we have a good
> > changelog under 'git log --merges v2019.04-rc2..v2019.04-rc3'
> >
> > We're looking at release on April 8th, 2019.
>
> I've had reports of crashes on AllWinner A20 devices, at least
> Cubieboard2, CubieTruck and BananaPi, with rc2/rc3 (I'm not 100% sure
> when it started) in Fedora. I'm suspecting some of the DM migration
> here.
>
> Are either of you aware of any issues there?
>
> Crash below.
>
> Regards,
> Peter
>
> U-Boot SPL 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000)
> DRAM: 2048 MiB
> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> Trying to boot from MMC1
>
>
> U-Boot 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000) Allwinner Technology
>
> CPU:   Allwinner A20 (SUN7I)
> Model: Cubietech Cubietruck
> I2C:   ready
> DRAM:  2 GiB
> MMC:   mmc at 1c0f000: 0, mmc at 1c12000: 1
> Loading Environment from FAT... ** No valid partitions found **
> Setting up a 1024x768 vga console (overscan 0x0)
> In:    serial
> Out:   vga
> Err:   vga
> Allwinner mUSB OTG (Peripheral)
> SCSI:  Target spinup took 0 ms.
> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> flags: ncq stag pm led clo only pmp pio slum part ccc apst
>
> Net:   sunxi_set_gate: (CLK#66) unhandled
> eth0: ethernet at 1c50000
> Warning: usb_ether using MAC address from ROM
> , eth1: usb_ether
> starting USB...
> USB0:   USB EHCI 1.00
> USB1:   USB OHCI 1.0
> USB2:   USB EHCI 1.00
> USB3:   USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 1 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
> scanning bus 3 for devices... 1 USB Device(s) found
>        scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot:  0
> switch to partitions #0, OK
> mmc0 is current device
> ** Invalid partition 1 **

are you sure, your sd has partitions?

Can you switch mmc dev and check the contents, mean while I can try it
on A20 later tomorrow.