[U-Boot] Pull request: u-boot-imx u -boot-imx-201900313
Stefano Babic
sbabic at denx.de
Wed Mar 13 09:39:53 UTC 2019
Hi Tom,
several local (I mean, just for boards) fixes for release. Conversion to
DM was merged for several boards into my -next and will be part of my PR
after release.
Travis build : https://travis-ci.org/sbabic/u-boot-imx/builds/505369115
The following changes since commit 2e8092d94f40a5692baf3ec768ce3216a7bf032a:
Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2019-03-11
15:48:57 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20190313
for you to fetch changes up to b882005a18dec45848e153dcf8d29b4a2feecf14:
drivers/net/fec: phy_init: remove redundant logic (2019-03-13 09:14:35
+0100)
----------------------------------------------------------------
Small fixes in several i.MX boards
----------------------------------
- imx8: add pinctrl driveri (mx8m), fix documentation and
fix reported CPU frequency. Fabio is co-maintainer
- pico-imx6ul: switch to DM
- local fixes for ventana, mx6ul_14x14_evk, engicam,
imx6(q)_logic, liteboard
----------------------------------------------------------------
Adam Ford (5):
ARM: imx6_logic: Fix typo in FDT address
ARM: imx6q_logic: Enable MTD and NAND_MXS_DT
imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdef
arm: dts: imx6qdl-u-boot: Enable spba-bus at 2000000 simple bus
MTD: mxs_nand_spl: Redo the way nand_init initializes
Baruch Siach (2):
imx8mq_evk/README: add missing firmware extract step
imx8mq_evk/README: fix DDR training firmware path
Chris Spencer (1):
imx8mq_evk_defconfig: Enable pinctrl driver
Fabio Estevam (15):
pico-imx6ul: Import dts files from kernel
pico-imx6ul: Select CONFIG_OF_CONTROL
pico-imx6ul: Convert to DM MMC
pico-imx6ul: Convert to CONFIG_DM_GPIO
pico-imx6ul: Convert to DM_PMIC
pico-imx6ul: README: Adjust the binary name after DM conversion
warp7: README: Adjust the binary name after DM conversion
warp7: Remove unneeded headers after DM conversion
mx6ul_14x14_evk: Simplify the PMIC register writes
warp7: Fix the write to the LDOGCTL PMIC register
mx6sabresd: README: Adjust the binary name after DM conversion
mx6sabreauto: README: Adjust the binary name after DM conversion
imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to Kconfig
imx8mq_evk: Add myself as a co-maintainer
imx8qxp: Fix the reported CPU frequency
Hannes Schmelzer (1):
drivers/net/fec: phy_init: remove redundant logic
Marcin Niestroj (2):
ARM: liteboard: move towards driver model and device-tree boot
ARM: liteboard: use random ethaddr
Martyn Welch (1):
imx: mx6qsabrelite: Update the SabreLite README
Peng Fan (1):
pinctrl: add imx8m driver
Shyam Saini (3):
board: engicam: Add watchdog support on Engicam
configs: imx6qdl_icore_mmc: Enable watchdog and bootcounter
include: configs: imx6-engicam: Add recovery boot option
Tim Harvey (2):
imx: ventana: hexdump invalid EEPROM data
imx: ventana: added support for 16bit 8Gb density (1GiB) DRAM
arch/arm/dts/imx6qdl-u-boot.dtsi | 3 +
arch/arm/dts/imx6ul-pico-hobbit.dts | 100
++++++++++++++++++++++++++++++++
arch/arm/dts/imx6ul-pico-pi.dts | 97
+++++++++++++++++++++++++++++++
arch/arm/dts/imx6ul-pico.dtsi | 461
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/imx8/cpu.c | 26 +++++----
arch/arm/mach-imx/mx6/Kconfig | 2 +
board/boundary/nitrogen6x/README.mx6qsabrelite | 119
+++++++++++++++++++++++++------------
board/engicam/common/board.c | 5 ++
board/freescale/imx8mq_evk/MAINTAINERS | 1 +
board/freescale/imx8mq_evk/README | 3 +-
board/freescale/mx6sabreauto/README | 12 ++--
board/freescale/mx6sabresd/README | 18 +++---
board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 9 +--
board/gateworks/gw_ventana/eeprom.c | 10 ++++
board/gateworks/gw_ventana/gw_ventana_spl.c | 5 ++
board/grinn/liteboard/board.c | 36 ------------
board/technexion/pico-imx6ul/README | 14 ++---
board/technexion/pico-imx6ul/pico-imx6ul.c | 96
+++++-------------------------
board/warp7/README | 12 ++--
board/warp7/warp7.c | 6 +-
configs/gwventana_emmc_defconfig | 1 +
configs/gwventana_gw5904_defconfig | 1 +
configs/gwventana_nand_defconfig | 1 +
configs/imx6q_logic_defconfig | 3 +
configs/imx6qdl_icore_mmc_defconfig | 7 +++
configs/imx8mq_evk_defconfig | 2 +
configs/liteboard_defconfig | 12 +++-
configs/pico-hobbit-imx6ul_defconfig | 15 ++++-
configs/pico-imx6ul_defconfig | 15 ++++-
configs/pico-pi-imx6ul_defconfig | 15 ++++-
drivers/mtd/nand/raw/mxs_nand_spl.c | 17 ++----
drivers/net/fec_mxc.c | 10 +---
drivers/pinctrl/nxp/Kconfig | 14 +++++
drivers/pinctrl/nxp/Makefile | 1 +
drivers/pinctrl/nxp/pinctrl-imx8m.c | 36 ++++++++++++
drivers/serial/serial_mxc.c | 4 +-
include/configs/imx6-engicam.h | 11 ++++
include/configs/imx6_logic.h | 8 +--
include/configs/imx8mq_evk.h | 1 -
include/configs/pico-imx6ul.h | 8 ---
40 files changed, 973 insertions(+), 244 deletions(-)
create mode 100644 arch/arm/dts/imx6ul-pico-hobbit.dts
create mode 100644 arch/arm/dts/imx6ul-pico-pi.dts
create mode 100644 arch/arm/dts/imx6ul-pico.dtsi
create mode 100644 drivers/pinctrl/nxp/pinctrl-imx8m.c
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list