[U-Boot] [PATCH v2] ARM: kirkwood: disable dcache for Kirkwood boards

Stefan Roese sr at denx.de
Tue Mar 19 08:04:03 UTC 2019


On 19.03.19 09:00, Chris Packham wrote:
> 
> 
> On Tue, 19 Mar 2019, 8:39 PM Stefan Roese, <sr at denx.de <mailto:sr at denx.de>> wrote:
> 
> 
> 
>     On 18.03.19 08:51, Chris Packham wrote:
>      > Prior to commit 93b283d49f93 ("ARM: CPU: arm926ejs: Consolidate cache
>      > routines to common file") the kirkwood boards didn't have and dcache
>      > support. The network and usb drivers rely on this. Set
>      > CONFIG_SYS_DCACHE_OFF in the Kirkwood specific config.h.
>      >
>      > Reported-by: Leigh Brown <leigh at solinno.co.uk <mailto:leigh at solinno.co.uk>>
>      > Signed-off-by: Chris Packham <judge.packham at gmail.com <mailto:judge.packham at gmail.com>>
>      > ---
>      >
>      > Changes in v2:
>      > - expand the comment in config.h to provide more info
>      >
>      >   arch/arm/mach-kirkwood/include/mach/config.h | 6 ++++++
>      >   1 file changed, 6 insertions(+)
>      >
>      > diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h
>      > index fcd903887bff..aea60688c2d3 100644
>      > --- a/arch/arm/mach-kirkwood/include/mach/config.h
>      > +++ b/arch/arm/mach-kirkwood/include/mach/config.h
>      > @@ -26,6 +26,12 @@
>      >   #define CONFIG_KIRKWOOD_EGIGA_INIT  /* Enable GbePort0/1 for kernel */
>      >   #define CONFIG_KIRKWOOD_RGMII_PAD_1V8       /* Set RGMII Pad voltage to 1.8V */
>      >   #define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE Port0 for kernel */
>      > +/*
>      > + * Disable the dcache. Currently the network driver (mvgbe.c) and USB
>      > + * EHCI driver (ehci-marvell.c) and possibly others rely on the data
>      > + * cache being disabled.
>      > + */
>      > +#define CONFIG_SYS_DCACHE_OFF
> 
>     While collecting the queued fixes for the upcoming release, I do
>     have one question regarding this Kirkwood cache issue (I don't have
>     such a board here, so I can't test anything):
> 
>     Do we need this patch applied [1], if the patch from this thread is
>     applied [2]?
> 
>     Thanks,
>     Stefan
> 
>     [1] http://patchwork.ozlabs.org/patch/1048863/
>     [2] http://patchwork.ozlabs.org/patch/1057716/
> 
> 
> I'm pretty sure you just need [2]. I've tested with just that on it's
> own and Ethernet works on the kirkwood db. Functionally it's the same
> change as Michael's just for more boards.
> 
> Leigh, can you see if [2] above works for you?

Patch [1] from Leigh also removes icache_enable() in
arch/arm/mach-kirkwood/cpu.c.

Not sure if this is still needed? Did any of you run into issues with
[1] not applied but with CONFIG_SYS_DCACHE_OFF set?

Thanks,
Stefan


More information about the U-Boot mailing list