[U-Boot] [PATCH 00/16] usb: convert dwc2 gadget to driver model, used in stm32mp1

Jack Mitchell ml at embed.me.uk
Sat Mar 30 11:42:14 UTC 2019



On 29/03/2019 14:42, Patrick Delaunay wrote:
> 
> This patch-set created after Marek remarks on patch
>   board: stm32mp1: Add tx_fifo_sz_array support
>   http://patchwork.ozlabs.org/patch/1056452/
> 
> This serie convert the DWC2 to driver model and use it for the
> stm32mp1 boards.
> 
> USB device and cable connection tested on EV1 and DK2.
> 
> This serie superseded the Patrice patches:
> http://patchwork.ozlabs.org/project/uboot/list/?series=97121
> 
> Warning: the serie need to be apply after
> http://patchwork.ozlabs.org/project/uboot/list/?series=91422
> http://patchwork.ozlabs.org/project/uboot/list/?series=91497

Hi Patrice,

The second patch series doesn't apply cleanly anymore, could you rebase
and resend so I can test this series?

Regards,
Jack.

> 
> 
> 
> Patrice Chotard (1):
>   usb: dwc2_udc_otg: Add tx_fifo_sz array support
> 
> Patrick Delaunay (15):
>   phy: usbphyc: remove unused variable index
>   phy: usbphyc: update xlate with DT binding
>   phy: usbphyc: Binding update of vdda supply
>   phy: usbphyc: move vdda1v1 and vdda1v8 in phy_init
>   phy: usbphyc: increase PLL wait timeout
>   usb: dwc2: remove unused variable regs_otg
>   usb: dwc2: convert driver to DM_USB_GADGET
>   usb: dwc2: force reset assert before to probe the driver
>   usb: dwc2: Add force-b-session-valid support
>   usb: dwc2: Add function for session B check
>   usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register
>   usb: dwc2: add support for STM32MP1
>   stm32mp1: remove CONFIG_USB_DWC2, HOST support for USBO
>   stm32mp1: migrate USBOTG device to driver model
>   stm32mp1: add stusb1600 support for DK1 and DK2 board
> 
>  arch/arm/dts/stm32mp157-pinctrl.dtsi               |   7 +
>  arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi           |   3 +-
>  arch/arm/dts/stm32mp157a-dk1.dts                   |  34 +-
>  arch/arm/dts/stm32mp157c-ed1.dts                   |   8 -
>  arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi           |   1 +
>  arch/arm/dts/stm32mp157c.dtsi                      |   5 +-
>  board/st/stm32mp1/stm32mp1.c                       | 185 +++-------
>  configs/stm32mp15_basic_defconfig                  |   2 +-
>  configs/stm32mp15_trusted_defconfig                |   2 +-
>  doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt |   4 +-
>  doc/device-tree-bindings/usb/dwc2.txt              |  58 +++
>  drivers/phy/phy-stm32-usbphyc.c                    | 111 +++---
>  drivers/usb/gadget/dwc2_udc_otg.c                  | 388 ++++++++++++++++++++-
>  drivers/usb/gadget/dwc2_udc_otg_priv.h             |   1 -
>  drivers/usb/gadget/dwc2_udc_otg_regs.h             |  31 +-
>  include/usb/dwc2_udc.h                             |   7 +
>  16 files changed, 627 insertions(+), 220 deletions(-)
>  create mode 100644 doc/device-tree-bindings/usb/dwc2.txt
> 


More information about the U-Boot mailing list