[U-Boot] [PATCH] arm: dts: Stratix10: Add QSPI node
Ley Foon Tan
lftan.linux at gmail.com
Mon Mar 25 02:29:00 UTC 2019
On Fri, Mar 22, 2019 at 7:39 PM Simon Goldschmidt
<simon.k.r.goldschmidt at gmail.com> wrote:
>
> On Fri, Mar 22, 2019 at 10:05 AM Ley Foon Tan <ley.foon.tan at intel.com> wrote:
> >
> > Add QSPI device tree to Stratix 10.
> > Sync from Linux Stratix 10 dts.
> >
> > Tested on Stratix 10 SoC devkit.
> > SOCFPGA_STRATIX10 # sf probe 0:0
> > SF: Detected mt25qu02g with page size 256 Bytes, erase size 64 KiB, total 256 MiB
> >
> > Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
> > ---
> > arch/arm/dts/socfpga_stratix10.dtsi | 16 ++++++++++++++++
> > arch/arm/dts/socfpga_stratix10_socdk.dts | 21 +++++++++++++++++++++
> > 2 files changed, 37 insertions(+)
> >
> > diff --git a/arch/arm/dts/socfpga_stratix10.dtsi b/arch/arm/dts/socfpga_stratix10.dtsi
> > index ee93725d64..1690f0e0bb 100644
> > --- a/arch/arm/dts/socfpga_stratix10.dtsi
> > +++ b/arch/arm/dts/socfpga_stratix10.dtsi
> > @@ -391,5 +391,21 @@
> > resets = <&rst WATCHDOG3_RESET>;
> > status = "disabled";
> > };
> > +
> > + qspi: spi at ff8d2000 {
> > + compatible = "cdns,qspi-nor";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0xff8d2000 0x100>,
> > + <0xff900000 0x100000>;
> > + interrupts = <0 3 4>;
> > + cdns,fifo-depth = <128>;
> > + cdns,fifo-width = <4>;
> > + cdns,trigger-address = <0x00000000>;
> > + bus-num = <0>;
> > + /*spi-max-frequency = <50000000>;*/
> > + status = "disabled";
> > + u-boot,dm-pre-reloc;
> > + };
> > };
> > };
> > diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts
> > index c59b77d829..4c47415b51 100644
> > --- a/arch/arm/dts/socfpga_stratix10_socdk.dts
> > +++ b/arch/arm/dts/socfpga_stratix10_socdk.dts
> > @@ -10,6 +10,7 @@
> >
> > aliases {
> > serial0 = &uart0;
> > + spi0 = &qspi;
> > };
> >
> > chosen {
> > @@ -87,6 +88,26 @@
> > smplsel = <0>;
> > };
> >
> > +&qspi {
> > + status = "okay";
> > +
> > + flash at 0 {
> > + u-boot,dm-pre-reloc;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + compatible = "spi-flash";
>
> "spi-flash" is u-boot specific and about to be deprecated. You should use
> the linux-compatible "jedec,spi-nor" binding.
Okay, will change in next revision.
Regards
Ley Foon
More information about the U-Boot
mailing list