[U-Boot] [PATCH 00/10] Update Stratix 10 SDRAM driver
Simon Goldschmidt
simon.k.r.goldschmidt at gmail.com
Tue Mar 12 11:08:24 UTC 2019
On Tue, Mar 12, 2019 at 9:31 AM Ley Foon Tan <ley.foon.tan at intel.com> wrote:
>
> This patchset update Stratix 10 SDRAM driver to support:
> - Multi-banks memory (Patch [1-8])
> - Stratix 10 support up to 2 memory banks:
> Bank 0: Address 0, size 2GB
> Bank 1: Address 0x100000000, size 124GB
> - Add warm reset boot checking function, to use in patch [10] (Patch[9])
> - Add ECC memory scrubbing support (Patch [10])
> - Use cache enabled + "DC ZVA" instruction to clear memory to zeros
When working on this, would it make sense to move the S10 SDRAM driver
to DM, using UCLASS_RAM, like I did for gen5 (see Marek's 'next' branch:
http://git.denx.de/?p=u-boot/u-boot-socfpga.git;a=commit;h=4796a7d5a7fd965c02cf290edec17acb2c9af766)
That might allow us to combine more of the code in mach-socfpga again
in the future...
Regards,
Simon
>
> Ley Foon Tan (10):
> ddr: altera: stratix10: Move SDRAM size check to SDRAM driver
> arm: socfpga: Add sdram_s10.h to sdram.h
> ddr: altera: s10: Add multiple memory banks support
> arm: socfpga: Update dram_init_banksize() for Stratix10
> board: altera: Stratix10: Add board_get_usable_ram_top()
> board: altera: Stratix10: Add ft_board_setup()
> arm: socfpga: Enable OF_BOARD_SETUP for Stratix 10
> configs: stratix10: Change CONFIG_NR_DRAM_BANKS to 2
> arm: socfpga: stratix10: Add cpu_has_been_warmreset()
> ddr: altera: Stratix10: Add ECC memory scrubbing
>
> arch/arm/mach-socfpga/Kconfig | 1 +
> arch/arm/mach-socfpga/board.c | 16 +-
> .../include/mach/reset_manager_s10.h | 3 +
> arch/arm/mach-socfpga/include/mach/sdram.h | 2 +
> .../arm/mach-socfpga/include/mach/sdram_s10.h | 10 +
> arch/arm/mach-socfpga/reset_manager_s10.c | 9 +
> arch/arm/mach-socfpga/spl_s10.c | 11 --
> board/altera/stratix10-socdk/socfpga.c | 37 ++++
> configs/socfpga_stratix10_defconfig | 2 +-
> drivers/ddr/altera/sdram_s10.c | 178 ++++++++++++++++++
> 10 files changed, 256 insertions(+), 13 deletions(-)
>
> --
> 2.19.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
More information about the U-Boot
mailing list