[U-Boot] [PATCH 2/9] riscv: Add a SYSCON driver for Andestech's PLIC

Bin Meng bmeng.cn at gmail.com
Wed Mar 20 07:22:24 UTC 2019


Hi Rick,

On Tue, Mar 19, 2019 at 5:12 PM Andes <uboot at andestech.com> wrote:
>
> From: Rick Chen <rick at andestech.com>
>
> The Platform-Level Interrupt Controller(PLIC)
> block holds memory-mapped claim and pending registers
> associated with software interrupt.It is required

nits: need one space after interrupt.

> for handling IPI.
>
> Signed-off-by: Rick Chen <rick at andestech.com>
> Cc: Greentime Hu <greentime at andestech.com>
> ---
>  arch/riscv/Kconfig                   |  9 ++++
>  arch/riscv/include/asm/global_data.h |  3 ++
>  arch/riscv/include/asm/syscon.h      |  2 +-
>  arch/riscv/lib/Makefile              |  1 +
>  arch/riscv/lib/nds_plic.c            | 84 ++++++++++++++++++++++++++++++++++++
>  5 files changed, 98 insertions(+), 1 deletion(-)
>  create mode 100644 arch/riscv/lib/nds_plic.c
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 3a4470d..fef11dd 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig

Probably it makes more sense to put this to arch/riscv/cpu/ax25/Kconfig?

> @@ -109,6 +109,15 @@ config SIFIVE_CLINT
>           The SiFive CLINT block holds memory-mapped control and status registers
>           associated with software and timer interrupts.
>
> +config NDS_PLIC

I am not sure if it is appropriate to call this "NDS_PLIC". Shouldn't
it be "ANDES_PLIC", because ANDES_ and SIFIVE_ are vendor prefixes.

> +       bool
> +       depends on RISCV_MMODE
> +       select REGMAP
> +       select SYSCON
> +       help
> +         The Andes PLIC block holds memory-mapped claim and pending registers
> +         associated with software interrupt.
> +
>  config RISCV_RDTIME
>         bool
>         default y if RISCV_SMODE
> diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h
> index 80e3165..15867f5 100644
> --- a/arch/riscv/include/asm/global_data.h
> +++ b/arch/riscv/include/asm/global_data.h
> @@ -18,6 +18,9 @@ struct arch_global_data {
>  #ifdef CONFIG_SIFIVE_CLINT
>         void __iomem *clint;    /* clint base address */
>  #endif
> +#ifdef CONFIG_NDS_PLIC
> +       void __iomem *plic;     /* plic base address */
> +#endif
>  #ifdef CONFIG_SMP
>         struct ipi_data ipi[CONFIG_NR_CPUS];
>  #endif
> diff --git a/arch/riscv/include/asm/syscon.h b/arch/riscv/include/asm/syscon.h
> index d311ee6..0229989 100644
> --- a/arch/riscv/include/asm/syscon.h
> +++ b/arch/riscv/include/asm/syscon.h
> @@ -9,11 +9,11 @@
>  /*
>   * System controllers in a RISC-V system
>   *
> - * So far only SiFive's Core Local Interruptor (CLINT) is defined.
>   */
>  enum {
>         RISCV_NONE,
>         RISCV_SYSCON_CLINT,     /* Core Local Interruptor (CLINT) */
> +       RISCV_SYSCON_PLIC,      /* Platform Level Interrup Controller (PLIC) */

typo: Interrupt

>  };
>
>  #endif /* _ASM_SYSCON_H */
> diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
> index 35dbf64..8187c2b 100644
> --- a/arch/riscv/lib/Makefile
> +++ b/arch/riscv/lib/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_CMD_GO) += boot.o
>  obj-y  += cache.o
>  obj-$(CONFIG_RISCV_RDTIME) += rdtime.o
>  obj-$(CONFIG_SIFIVE_CLINT) += sifive_clint.o
> +obj-$(CONFIG_NDS_PLIC) += nds_plic.o
>  obj-y  += interrupts.o
>  obj-y  += reset.o
>  obj-$(CONFIG_SBI_IPI) += sbi_ipi.o
> diff --git a/arch/riscv/lib/nds_plic.c b/arch/riscv/lib/nds_plic.c

And move this driver to arch/riscv/cpu/ax25 since it's only available
in AX25 CPUs?

> new file mode 100644
> index 0000000..563da7d
> --- /dev/null
> +++ b/arch/riscv/lib/nds_plic.c
> @@ -0,0 +1,84 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019, Rick Chen <rick at andestech.com>
> + *
> + * U-Boot syscon driver for Andes's Platform Level Interrupt Controller (PLIC).
> + * The PLIC block holds memory-mapped claim and pending registers
> + * associated with software interrupt.
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <regmap.h>
> +#include <syscon.h>
> +#include <asm/io.h>
> +#include <asm/syscon.h>
> +
> +/* pending register */
> +#define PENDING_REG(base, hart)        ((ulong)(base) + 0x1000 + (hart) * 8)
> +/* enable register */
> +#define ENABLE_REG(base, hart) ((ulong)(base) + 0x2000 + (hart) * 0x80)
> +/* claim register */
> +#define CLAIM_REG(base, hart)  ((ulong)(base) + 0x200004 + (hart) * 0x1000)
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define PLIC_BASE_GET(void)                                            \
> +       do {                                                            \
> +               long *ret;                                              \
> +                                                                       \
> +               if (!gd->arch.plic) {                                   \
> +                       ret = syscon_get_first_range(RISCV_SYSCON_PLIC); \
> +                       if (IS_ERR(ret))                                \
> +                               return PTR_ERR(ret);                    \
> +                       gd->arch.plic = ret;                            \
> +               }                                                       \
> +       } while (0)
> +
> +int plic_init(int harts)

Can we make this function be automatically called in PLIC_BASE_GET()?

> +{
> +       int i;
> +       int en = 0x80808080;

Can we use some macros for this?

> +
> +       PLIC_BASE_GET();
> +       for(i=0;i<harts;i++)

nits: should have various spaces like i = 0;

> +       {
> +               en = en >> i;
> +               writel(en, (void __iomem *)ENABLE_REG(gd->arch.plic, i));
> +       }
> +
> +       return 0;
> +}
> +
> +int riscv_send_ipi(int hart)
> +{
> +       PLIC_BASE_GET();
> +
> +       writel((0x80>>hart), (void __iomem *)PENDING_REG(gd->arch.plic, gd->arch.boot_hart));

macro for 0x80?

> +
> +       return 0;
> +}
> +
> +int riscv_clear_ipi(int hart)
> +{
> +       u32 source_id;
> +
> +       PLIC_BASE_GET();
> +
> +       source_id = readl((void __iomem *)CLAIM_REG(gd->arch.plic, hart));
> +       writel(source_id, (void __iomem *)CLAIM_REG(gd->arch.plic, hart));
> +
> +       return 0;
> +}
> +
> +static const struct udevice_id nds_plic_ids[] = {
> +       { .compatible = "riscv,plic1", .data = RISCV_SYSCON_PLIC },
> +       { }
> +};
> +
> +U_BOOT_DRIVER(nds_plic) = {
> +       .name           = "nds_plic",
> +       .id             = UCLASS_SYSCON,
> +       .of_match       = nds_plic_ids,
> +       .flags          = DM_FLAG_PRE_RELOC,
> +};
> --

Regards,
Bin


More information about the U-Boot mailing list