[U-Boot] [PATCH v10 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK
tien.fong.chee at intel.com
tien.fong.chee at intel.com
Tue Mar 5 15:53:48 UTC 2019
From: Tien Fong Chee <tien.fong.chee at intel.com>
Update the default configuration file to enable the necessary functionality
the get the kit working.
Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
---
changes for v8
- Moved the FIT related configs to the patch of configuration for FPGA
SoCFPGA A10 SoCDK.
changes for v7
- Keep minimal configs.
---
configs/socfpga_arria10_defconfig | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
index c870543346..bdbf90ed44 100644
--- a/configs/socfpga_arria10_defconfig
+++ b/configs/socfpga_arria10_defconfig
@@ -10,10 +10,13 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200"
# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
+CONFIG_VERSION_VARIABLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_FPGA_SUPPORT=y
-CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
# CONFIG_CMD_FLASH is not set
@@ -22,9 +25,7 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SPL_ENV_SUPPORT=y
@@ -32,7 +33,6 @@ CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_DM_MMC=y
CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_EXT_SUPPORT=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_FS_LOADER=y
@@ -43,11 +43,14 @@ CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MTD_DEVICE=y
+CONFIG_MMC_DW=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_DESIGNWARE_APB_TIMER=y
-CONFIG_USE_TINY_PRINTF=y
--
2.13.0
More information about the U-Boot
mailing list