[U-Boot] [PATCH v4 0/4] Add Ethernet support for Poplar board

Shawn Guo shawn.guo at linaro.org
Wed Mar 20 07:32:37 UTC 2019


The series adds Ethernet support for Poplar board.  It firstly creates
a reset driver for HiSilicon platform, then introduces higmacv300
Ethernet driver, and finally enables Ethernet support for Poplar board.

Changes for v4:
 - Add a polarity field into struct reset_ctl.
 - Instead of defining custom macros for polarity, use generic ones
   in include/dt-bindings/reset/ti-syscon.h.
 - Use .data field as register offset and .id field as bit shift.
Changes for v3:
 - Add polarity support into reset driver, so that we can drop the
   hacking on gmac reset sequence from higmacv300 driver.
Changes for v2:
 - Rename driver symbol to HIGMACV300_ETH.
 - Remove the use of temp variable 'addr' in higmac_recv().
 - Simplify the return of function higmac_ofdata_to_platdata() and
   higmac_probe().
 - Combine delaration and initialization for phyintf in function
   higmac_ofdata_to_platdata().
 - Eliminate the MDIO read/write macros.
 - Use wait_for_bit_le32() for MDIO command completion polling.
 - Set up RX packet buffers in RX_FQ descriptor at initialization time,
   so that we do not need to allocate/free packet buffers repeatedly.
 - Inform GMAC that the RX descriptor is no longer in use in function
   higmac_free_pkt().
 - Define BITS_DESC_ENA instead of using magic number 0xf.

Shawn Guo (4):
  reset: add polarity field into struct reset_ctl
  reset: add reset driver for HiSilicon platform
  net: add higmacv300 Ethernet driver for HiSilicon platform
  poplar: enable Ethernet driver support

 arch/arm/dts/hi3798cv200-u-boot.dtsi |  14 +
 configs/poplar_defconfig             |   3 +
 drivers/net/Kconfig                  |   9 +
 drivers/net/Makefile                 |   1 +
 drivers/net/higmacv300.c             | 597 +++++++++++++++++++++++++++
 drivers/reset/Kconfig                |   6 +
 drivers/reset/Makefile               |   1 +
 drivers/reset/reset-hisilicon.c      | 103 +++++
 include/reset.h                      |   3 +
 9 files changed, 737 insertions(+)
 create mode 100644 drivers/net/higmacv300.c
 create mode 100644 drivers/reset/reset-hisilicon.c

-- 
2.18.0



More information about the U-Boot mailing list