[U-Boot] [ANN] U-Boot v2019.04-rc3 released

Thu Mar 21 07:16:45 UTC 2019

On Wed, Mar 20, 2019 at 11:05 PM Peter Robinson <pbrobinson at gmail.com> wrote:
>
> On Fri, Mar 8, 2019 at 6:34 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
> >
> > On Fri, Mar 8, 2019 at 11:32 PM Peter Robinson <pbrobinson at gmail.com> wrote:
> > >
> > > Hey Tom and Jagan,
> > >
> > > > Hey all,
> > > >
> > > > So it's release day and I've put up v2019.04-rc3, I've updated git and
> > > > the tarballs are also up now.
> > > >
> > > > Thanks again to having signed tags, between -rc2 and -rc3 we have a good
> > > > changelog under 'git log --merges v2019.04-rc2..v2019.04-rc3'
> > > >
> > > > We're looking at release on April 8th, 2019.
> > >
> > > I've had reports of crashes on AllWinner A20 devices, at least
> > > Cubieboard2, CubieTruck and BananaPi, with rc2/rc3 (I'm not 100% sure
> > > when it started) in Fedora. I'm suspecting some of the DM migration
> > > here.
> > >
> > > Are either of you aware of any issues there?
> > >
> > > Crash below.
> > >
> > > Regards,
> > > Peter
> > >
> > > U-Boot SPL 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000)
> > > DRAM: 2048 MiB
> > > CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> > > Trying to boot from MMC1
> > >
> > >
> > > U-Boot 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000) Allwinner Technology
> > >
> > > CPU:   Allwinner A20 (SUN7I)
> > > Model: Cubietech Cubietruck
> > > I2C:   ready
> > > DRAM:  2 GiB
> > > MMC:   mmc at 1c0f000: 0, mmc at 1c12000: 1
> > > Loading Environment from FAT... ** No valid partitions found **
> > > Setting up a 1024x768 vga console (overscan 0x0)
> > > In:    serial
> > > Out:   vga
> > > Err:   vga
> > > Allwinner mUSB OTG (Peripheral)
> > > SCSI:  Target spinup took 0 ms.
> > > AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> > > flags: ncq stag pm led clo only pmp pio slum part ccc apst
> > >
> > > Net:   sunxi_set_gate: (CLK#66) unhandled
> > > eth0: ethernet at 1c50000
> > > Warning: usb_ether using MAC address from ROM
> > > , eth1: usb_ether
> > > starting USB...
> > > USB0:   USB EHCI 1.00
> > > USB1:   USB OHCI 1.0
> > > USB2:   USB EHCI 1.00
> > > USB3:   USB OHCI 1.0
> > > scanning bus 0 for devices... 1 USB Device(s) found
> > > scanning bus 1 for devices... 1 USB Device(s) found
> > > scanning bus 2 for devices... 1 USB Device(s) found
> > > scanning bus 3 for devices... 1 USB Device(s) found
> > >        scanning usb for storage devices... 0 Storage Device(s) found
> > > Hit any key to stop autoboot:  0
> > > switch to partitions #0, OK
> > > mmc0 is current device
> > > ** Invalid partition 1 **
> >
> > are you sure, your sd has partitions?
> >
> > Can you switch mmc dev and check the contents, mean while I can try it
> > on A20 later tomorrow.
>
> Hi Jagan,
>
> Did you get a chance to test this? We've seen this on at least Cubie2,
> CubieTruck and BananaPi and it still persists with rc4

I made a quick test on v2019.01 vs v2019.04-rc3, below are the
results. I even grab the reg dump for your information. please check
the same.

U-Boot 2019.04-rc3-00065-g8cafb42fb7 (Mar 21 2019 - 12:42:33 +0530)
Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Model: LeMaker Banana Pi
I2C:   ready
DRAM:  1 GiB
MMC:   mmc at 1c0f000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

Selecting environment with bad CRC
Setting up a 720x576i composite-pal console (overscan 32x20)
In:    serial
Out:   vga
Err:   vga
SCSI:  SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst

Net:   sunxi_set_gate: (CLK#66) unhandled
eth0: ethernet at 1c50000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 3 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
=>
=> mmc dev 0
switch to partitions #0, OK
mmc0 is current device
=> fatls mmc 0:1
  3945128   zImage
    26934   sun7i-a20-bananapi-m1-plus.dtb
            extlinux/

2 file(s), 1 dir(s)
=> md 0x1c0f000
01c0f000: 80000000 00010000 ffffff40 00000001    ........ at .......
01c0f010: 00000200 00000800 00003352 00000904    ........R3......
01c0f020: 00000900 00000b00 5b590000 400e0032    ..........Y[2..@
01c0f030: c0000000 00000000 00000000 00006106    .............a..
01c0f040: 000f0000 00000000 00000800 00000800    ................
01c0f050: 00000000 00000000 00000000 00000000    ................
01c0f060: 00000000 00000000 00000000 00000000    ................
01c0f070: 00000000 00000000 00000000 00000000    ................
01c0f080: 00000000 00000000 00000000 00000000    ................
01c0f090: 00000000 00000000 00000000 00000000    ................
01c0f0a0: 00000000 00000000 00000000 00000000    ................
01c0f0b0: 00000000 00000000 00000000 00000000    ................
01c0f0c0: 00000000 00000000 00000000 00000000    ................
01c0f0d0: 00000000 00000000 00000000 00000000    ................
01c0f0e0: 00000000 00000000 00000000 00000000    ................
01c0f0f0: 00000000 00000000 00000000 00000000    ................
=> md 0x1c20000
01c20000: a1005310 0a10101e 08100010 00000000    .S..............
01c20010: 80008009 00000000 21009911 00000000    ...........!....
01c20020: b1049291 1488801a a100d911 00000000    ................
01c20030: 0010d063 00000000 00000000 00000000    c...............
01c20040: 21009911 00000000 00000000 00000000    ...!............
01c20050: 00138013 00020112 00000000 00000000    ................
01c20060: 0200c15e 00021014 00000020 00010001    ^....... .......
01c20070: 00000000 00000000 00000000 00000000    ................
01c20080: 00000000 00000000 8140030b 00000000    .......... at .....
01c20090: 00000000 00000000 00000000 00000000    ................
01c200a0: 00000000 00000000 00000000 00000000    ................
01c200b0: 00000000 00000000 00000000 00030000    ................
01c200c0: 00010000 0000001f 00000000 000001c6    ................
01c200d0: 80000000 00000000 00000000 00000000    ................
01c200e0: 00000000 00000000 00000000 00000000    ................
01c200f0: 00000000 00000000 00000000 00000000    ................

U-Boot 2019.01 (Mar 21 2019 - 12:38:13 +0530) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Model: LeMaker Banana Pi
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

Setting up a 720x576i composite-pal console (overscan 32x20)
In:    serial
Out:   vga
Err:   vga
SCSI:  SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst

Net:   eth0: ethernet at 1c50000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
=>
=> md 0x1c0f000
01c0f000: 80000000 00010000 ffffff40 00000001    ........ at .......
01c0f010: 00000200 00000800 00003352 00000904    ........R3......
01c0f020: 00000900 00000b00 5b590000 400e0032    ..........Y[2..@
01c0f030: c0000000 00000000 00000000 00006106    .............a..
01c0f040: 000f0000 00000000 00000800 00000800    ................
01c0f050: 00000000 00000000 00000000 00000000    ................
01c0f060: 00000000 00000000 00000000 00000000    ................
01c0f070: 00000000 00000000 00000000 00000000    ................
01c0f080: 00000000 00000000 00000000 00000000    ................
01c0f090: 00000000 00000000 00000000 00000000    ................
01c0f0a0: 00000000 00000000 00000000 00000000    ................
01c0f0b0: 00000000 00000000 00000000 00000000    ................
01c0f0c0: 00000000 00000000 00000000 00000000    ................
01c0f0d0: 00000000 00000000 00000000 00000000    ................
01c0f0e0: 00000000 00000000 00000000 00000000    ................
01c0f0f0: 00000000 00000000 00000000 00000000    ................
=> md 0x1c20000
01c20000: a1005310 0a10101e 08100010 00000000    .S..............
01c20010: 80008009 00000000 21009911 00000000    ...........!....
01c20020: b1049291 1488801a a100d911 00000000    ................
01c20030: 0010d063 00000000 00000000 00000000    c...............
01c20040: 21009911 00000000 00000000 00000000    ...!............
01c20050: 00138013 00020112 00000000 00000000    ................
01c20060: 0200c15e 00021014 00000020 00010001    ^....... .......
01c20070: 00000000 00000000 00000000 00000000    ................
01c20080: 00000000 00000000 8140030b 00000000    .......... at .....
01c20090: 00000000 00000000 00000000 00000000    ................
01c200a0: 00000000 00000000 00000000 00000000    ................
01c200b0: 00000000 00000000 00000000 00030000    ................
01c200c0: 00010000 0000001f 00000000 000000c6    ................
01c200d0: 80000000 00000000 00000000 00000000    ................
01c200e0: 00000000 00000000 00000000 00000000    ................
01c200f0: 00000000 00000000 00000000 00000000    ................

Jagan.