[U-Boot] [PATCH v4] usb: host: Print device name when scanning
Marek Vasut
marek.vasut at gmail.com
Thu Mar 21 03:07:25 UTC 2019
On 3/19/19 10:19 AM, Ismael Luceno Cortes wrote:
> Drop the counter, it has no meaning other than being the order in which
> the interface is found; the name assigned to the USB host controller
> interface is a better indicator.
>
> Example of the original output:
>> USB0: USB EHCI 1.10
>> scanning bus 0 for devices... 2 USB Device(s) found
>> scanning usb for storage devices... 1 Storage Device(s) found
>
> Patched output:
>> Bus usb at ee080100: USB EHCI 1.10
>> scanning bus usb at ee080100 for devices... 2 USB Device(s) found
>> scanning usb for storage devices... 1 Storage Device(s) found
>
> Signed-off-by: Ismael Luceno <ismael.luceno at silicon-gears.com>
> ---
>
> Notes:
> Changes since v3:
> - Replaced dev->seq with dev->name in usb_scan_bus
>
> Changes since v2:
> - Dropped counter altogether.
>
> Changes since v1:
> - Improved commit message.
>
> drivers/usb/host/usb-uclass.c | 12 ++++--------
> 1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/usb/host/usb-uclass.c b/drivers/usb/host/usb-uclass.c
> index 611ea97a72..6e118b5a8f 100644
> --- a/drivers/usb/host/usb-uclass.c
> +++ b/drivers/usb/host/usb-uclass.c
> @@ -210,7 +210,7 @@ static void usb_scan_bus(struct udevice *bus, bool recurse)
>
> assert(recurse); /* TODO: Support non-recusive */
>
> - printf("scanning bus %d for devices... ", bus->seq);
> + printf("scanning bus %s for devices... ", bus->name);
> debug("\n");
> ret = usb_scan_device(bus, 0, USB_SPEED_FULL, &dev);
> if (ret)
> @@ -242,7 +242,6 @@ int usb_init(void)
> struct usb_bus_priv *priv;
> struct udevice *bus;
> struct uclass *uc;
> - int count = 0;
> int ret;
>
> asynch_allowed = 1;
> @@ -255,8 +254,7 @@ int usb_init(void)
>
> uclass_foreach_dev(bus, uc) {
> /* init low_level USB */
> - printf("USB%d: ", count);
> - count++;
> + printf("Bus %s: ", bus->name);
>
> #ifdef CONFIG_SANDBOX
> /*
> @@ -327,10 +325,8 @@ int usb_init(void)
> remove_inactive_children(uc, bus);
>
> /* if we were not able to find at least one working bus, bail out */
> - if (!count)
> - printf("No controllers found\n");
> - else if (controllers_initialized == 0)
> - printf("USB error: all controllers failed lowlevel init\n");
> + if (controllers_initialized == 0)
> + printf("No working controllers found\n");
>
> return usb_started ? 0 : -1;
> }
Applied, thanks.
I wonder if this might break on non-DM/DT platforms though.
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list