[U-Boot] [PATCH v2 14/22] colibri_vf: set fdtfile for distroboot

[Igor Opaniuk]

Reviewed-by: Igor Opaniuk <igor.opaniuk at toradex.com>

On Mon, Mar 25, 2019 at 6:32 PM Marcel Ziswiler <marcel at ziswiler.com> wrote:
>
> From: Stefan Agner <stefan.agner at toradex.com>
>
> Set fdtfile to represent the current board. This allows distribution
> to load the correct device tree, which in the module case often
> deviates from the common fallback ${soc}-${board}${boardver}.dtb...
>
> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
> Acked-by: Max Krummenacher <max.krummenacher at toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>
> ---
>
> Changes in v2: None
>
>  include/configs/colibri_vf.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index 83a33ff786..0bbeeb902e 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -86,7 +86,8 @@
>         "ubi read ${fdt_addr_r} dtb && " \
>         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
>
> -#define CONFIG_BOOTCOMMAND "run ubiboot; run distro_bootcmd;"
> +#define CONFIG_BOOTCOMMAND "run ubiboot; " \
> +       "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
>
>  #define BOOT_TARGET_DEVICES(func) \
>         func(MMC, mmc, 0) \
> @@ -108,7 +109,6 @@
>         "defargs=\0" \
>         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
>         "fdt_board=eval-v3\0" \
> -       "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
>         "fdt_fixup=;\0" \
>         "kernel_file=zImage\0" \
>         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot