[U-Boot] [RFC PATCH v2 07/12] Makefile: Pass the board name to the FIT generator scripts

[Jean-Jacques Hiblot]

Currently the FIT generator scripts are passed only a list of dtbs.
However some platforms may also require information about the board itself.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---

Changes in v2: None

 Makefile                               | 2 +-
 arch/arm/mach-imx/mkimage_fit_atf.sh   | 3 ++-
 arch/arm/mach-rockchip/make_fit_atf.py | 5 +++--
 board/sunxi/mksunxi_fit_atf.sh         | 2 ++
 4 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/Makefile b/Makefile
index 9275c8930e..d30e229ad9 100644
--- a/Makefile
+++ b/Makefile
@@ -1166,7 +1166,7 @@ ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
 U_BOOT_ITS_DEPS += u-boot
 endif
 $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
-	$(srctree)/$(SPL_FIT_GENERATOR) \
+	$(srctree)/$(SPL_FIT_GENERATOR) $(BOARD) \
 	$(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
 endif
 endif
diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh
index 38c9858e84..45b325665e 100755
--- a/arch/arm/mach-imx/mkimage_fit_atf.sh
+++ b/arch/arm/mach-imx/mkimage_fit_atf.sh
@@ -4,7 +4,7 @@
 # script to generate FIT image source for i.MX8MQ boards with
 # ARM Trusted Firmware and multiple device trees (given on the command line)
 #
-# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+# usage: $0 <board> <dt_name> [<dt_name> [<dt_name] ...]
 
 [ -z "$BL31" ] && BL31="bl31.bin"
 [ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0xfe000000"
@@ -39,6 +39,7 @@ else
 	ls -lct u-boot-nodtb.bin | awk '{print $5}' >&2
 fi
 
+shift
 for dtname in $*
 do
 	echo "$dtname size: " >&2
diff --git a/arch/arm/mach-rockchip/make_fit_atf.py b/arch/arm/mach-rockchip/make_fit_atf.py
index d1faff1957..4138b04a37 100755
--- a/arch/arm/mach-rockchip/make_fit_atf.py
+++ b/arch/arm/mach-rockchip/make_fit_atf.py
@@ -4,7 +4,7 @@ A script to generate FIT image source for rockchip boards
 with ARM Trusted Firmware
 and multiple device trees (given on the command line)
 
-usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+usage: $0 <board> <dt_name> [<dt_name> [<dt_name] ...]
 """
 
 import os
@@ -209,7 +209,8 @@ def main():
             print(__doc__)
             sys.exit(2)
 
-    dtbs = args
+    board = args[0]
+    dtbs = args[1:]
     #get_bl31_segments_info("u-boot")
     #get_bl31_segments_info("bl31.elf")
 
diff --git a/board/sunxi/mksunxi_fit_atf.sh b/board/sunxi/mksunxi_fit_atf.sh
index 88ad719747..0dc7ab4348 100755
--- a/board/sunxi/mksunxi_fit_atf.sh
+++ b/board/sunxi/mksunxi_fit_atf.sh
@@ -46,6 +46,8 @@ cat << __HEADER_EOF
 		};
 __HEADER_EOF
 
+shift
+
 cnt=1
 for dtname in $*
 do
-- 
2.17.1