[U-Boot] [PATCH v2 1/3] ARM: dts: meson: add p200 and p201 boards
Neil Armstrong
narmstrong at baylibre.com
Thu Mar 14 20:09:56 UTC 2019
Hi,
Le 14/03/2019 18:00, Mohammad Rasim a écrit :
> This adds the device trees for p200 and p201 boards.
> Synced from kernel 5.0.0 revision a667cb7a94d48a483fb5d6006fe04a440f1a42ce.
Commits should be described using the 12bytes identifier, like the Fixes tag.
You can update it if you resend, and keep my Acked-by.
>
> Signed-off-by: Mohammad Rasim <mohammad.rasim96 at gmail.com>
> ---
> arch/arm/dts/Makefile | 2 +
> arch/arm/dts/meson-gxbb-p200.dts | 99 ++++++++++++
> arch/arm/dts/meson-gxbb-p201.dts | 26 ++++
> arch/arm/dts/meson-gxbb-p20x.dtsi | 247 ++++++++++++++++++++++++++++++
> 4 files changed, 374 insertions(+)
> create mode 100644 arch/arm/dts/meson-gxbb-p200.dts
> create mode 100644 arch/arm/dts/meson-gxbb-p201.dts
> create mode 100644 arch/arm/dts/meson-gxbb-p20x.dtsi
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 2a040b20a5..adf5f26fac 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -60,6 +60,8 @@ dtb-$(CONFIG_ARCH_MESON) += \
> meson-gxbb-nanopi-k2.dtb \
> meson-gxbb-odroidc2.dtb \
> meson-gxbb-nanopi-k2.dtb \
> + meson-gxbb-p200.dtb \
> + meson-gxbb-p201.dtb \
> meson-gxl-s905x-p212.dtb \
> meson-gxl-s905x-libretech-cc.dtb \
> meson-gxl-s905x-khadas-vim.dtb \
> diff --git a/arch/arm/dts/meson-gxbb-p200.dts b/arch/arm/dts/meson-gxbb-p200.dts
> new file mode 100644
> index 0000000000..9d2406a7c4
> --- /dev/null
> +++ b/arch/arm/dts/meson-gxbb-p200.dts
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2016 Andreas Färber
> + * Copyright (c) 2016 BayLibre, Inc.
> + * Author: Kevin Hilman <khilman at kernel.org>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxbb-p20x.dtsi"
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + compatible = "amlogic,p200", "amlogic,meson-gxbb";
> + model = "Amlogic Meson GXBB P200 Development Board";
> +
> + avdd18_usb_adc: regulator-avdd18_usb_adc {
> + compatible = "regulator-fixed";
> + regulator-name = "AVDD18_USB_ADC";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + adc_keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 0>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1800000>;
> +
> + button-home {
> + label = "Home";
> + linux,code = <KEY_HOME>;
> + press-threshold-microvolt = <900000>; /* 50% */
> + };
> +
> + button-esc {
> + label = "Esc";
> + linux,code = <KEY_ESC>;
> + press-threshold-microvolt = <684000>; /* 38% */
> + };
> +
> + button-up {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + press-threshold-microvolt = <468000>; /* 26% */
> + };
> +
> + button-down {
> + label = "Volume Down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + press-threshold-microvolt = <252000>; /* 14% */
> + };
> +
> + button-menu {
> + label = "Menu";
> + linux,code = <KEY_MENU>;
> + press-threshold-microvolt = <0>; /* 0% */
> + };
> + };
> +};
> +
> +ðmac {
> + status = "okay";
> + pinctrl-0 = <ð_rgmii_pins>;
> + pinctrl-names = "default";
> + phy-handle = <ð_phy0>;
> + phy-mode = "rgmii";
> +
> + amlogic,tx-delay-ns = <2>;
> +
> + snps,reset-gpio = <&gpio GPIOZ_14 0>;
> + snps,reset-delays-us = <0 10000 1000000>;
> + snps,reset-active-low;
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + eth_phy0: ethernet-phy at 3 {
> + /* Micrel KSZ9031 (0x00221620) */
> + reg = <3>;
> + interrupt-parent = <&gpio_intc>;
> + /* MAC_INTR on GPIOZ_15 */
> + interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
> + };
> + };
> +};
> +
> +&i2c_B {
> + status = "okay";
> + pinctrl-0 = <&i2c_b_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&avdd18_usb_adc>;
> +};
> diff --git a/arch/arm/dts/meson-gxbb-p201.dts b/arch/arm/dts/meson-gxbb-p201.dts
> new file mode 100644
> index 0000000000..56e0dd1ff5
> --- /dev/null
> +++ b/arch/arm/dts/meson-gxbb-p201.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2016 Andreas Färber
> + * Copyright (c) 2016 BayLibre, Inc.
> + * Author: Kevin Hilman <khilman at kernel.org>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxbb-p20x.dtsi"
> +
> +/ {
> + compatible = "amlogic,p201", "amlogic,meson-gxbb";
> + model = "Amlogic Meson GXBB P201 Development Board";
> +};
> +
> +ðmac {
> + status = "okay";
> + pinctrl-0 = <ð_rmii_pins>;
> + pinctrl-names = "default";
> + phy-mode = "rmii";
> +
> + snps,reset-gpio = <&gpio GPIOZ_14 0>;
> + snps,reset-delays-us = <0 10000 1000000>;
> + snps,reset-active-low;
> +};
> diff --git a/arch/arm/dts/meson-gxbb-p20x.dtsi b/arch/arm/dts/meson-gxbb-p20x.dtsi
> new file mode 100644
> index 0000000000..0be0f2a5d2
> --- /dev/null
> +++ b/arch/arm/dts/meson-gxbb-p20x.dtsi
> @@ -0,0 +1,247 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2016 Andreas Färber
> + * Copyright (c) 2016 BayLibre, Inc.
> + * Author: Kevin Hilman <khilman at kernel.org>
> + */
> +
> +#include "meson-gxbb.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &uart_AO;
> + ethernet0 = ðmac;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x40000000>;
> + };
> +
> + usb_pwr: regulator-usb-pwrs {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "USB_PWR";
> +
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + /* signal name in schematic: USB_PWR_EN */
> + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + vddio_card: gpio-regulator {
> + compatible = "regulator-gpio";
> +
> + regulator-name = "VDDIO_CARD";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
> + gpios-states = <1>;
> +
> + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
> + states = <1800000 0
> + 3300000 1>;
> +
> + regulator-settling-time-up-us = <10000>;
> + regulator-settling-time-down-us = <150000>;
> + };
> +
> + vddio_boot: regulator-vddio_boot {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_BOOT";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddao_3v3: regulator-vddao_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDAO_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vcc_3v3: regulator-vcc_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi32k: wifi32k {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + clocks = <&wifi32k>;
> + clock-names = "ext_clock";
> + };
> +
> + cvbs_connector: cvbs-connector {
> + compatible = "composite-video-connector";
> +
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> + };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_tx_tmds_out>;
> + };
> + };
> + };
> +};
> +
> +&cec_AO {
> + status = "okay";
> + pinctrl-0 = <&ao_cec_pins>;
> + pinctrl-names = "default";
> + hdmi-phandle = <&hdmi_tx>;
> +};
> +
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> + };
> +};
> +
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&pwm_ef {
> + status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> +};
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> + status = "okay";
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-1 = <&sdio_clk_gate_pins>;
> + pinctrl-names = "default", "clk-gate";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> +
> + non-removable;
> + disable-wp;
> +
> + mmc-pwrseq = <&sdio_pwrseq>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +
> + brcmf: wifi at 1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-1 = <&sdcard_clk_gate_pins>;
> + pinctrl-names = "default", "clk-gate";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
> + max-frequency = <100000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_card>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
> + pinctrl-1 = <&emmc_clk_gate_pins>;
> + pinctrl-names = "default", "clk-gate";
> +
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + max-frequency = <200000000>;
> + non-removable;
> + disable-wp;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* This UART is brought out to the DB9 connector */
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&usb0_phy {
> + status = "okay";
> + phy-supply = <&usb_pwr>;
> +};
> +
> +&usb1_phy {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> --
> 2.21.0
>
Acked-by: Neil Armstrong <narmstrong at baylibre.com>
Thanks,
Neil
More information about the U-Boot
mailing list