[U-Boot] [PATCH v3 3/4] net: mscc: jaguar2: Add ethenet nodes for Jaguar2.
Horatiu Vultur
horatiu.vultur at microchip.com
Sat Mar 30 10:17:02 UTC 2019
Add ethernet nodes for Jaguar2 SoCs family. There are 3 pcb in this
family: pcb110, pcb111 and pcb112.
Signed-off-by: Horatiu Vultur <horatiu.vultur at microchip.com>
---
arch/mips/dts/jr2_pcb110.dts | 76 +++++++
arch/mips/dts/jr2_pcb111.dts | 400 ++++++++++++++++++++++++++++++++++++
arch/mips/dts/mscc,jr2.dtsi | 116 +++++++++++
arch/mips/dts/serval2_pcb112.dts | 44 ++++
include/dt-bindings/mscc/jr2_data.h | 19 ++
5 files changed, 655 insertions(+)
create mode 100644 include/dt-bindings/mscc/jr2_data.h
diff --git a/arch/mips/dts/jr2_pcb110.dts b/arch/mips/dts/jr2_pcb110.dts
index ddc30ff..4a5a584 100644
--- a/arch/mips/dts/jr2_pcb110.dts
+++ b/arch/mips/dts/jr2_pcb110.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include "mscc,jr2.dtsi"
+#include <dt-bindings/mscc/jr2_data.h>
/ {
model = "Jaguar2 Cu8-Sfp16 PCB110 Reference Board";
@@ -72,3 +73,78 @@
sgpio-ports = <0x3f00ffff>;
gpio-ranges = <&sgpio2 0 0 96>;
};
+
+&mdio1 {
+ status = "okay";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+ phy2: ethernet-phy at 2 {
+ reg = <2>;
+ };
+ phy3: ethernet-phy at 3 {
+ reg = <3>;
+ };
+ phy4: ethernet-phy at 4 {
+ reg = <4>;
+ };
+ phy5: ethernet-phy at 5 {
+ reg = <5>;
+ };
+ phy6: ethernet-phy at 6 {
+ reg = <6>;
+ };
+ phy7: ethernet-phy at 7 {
+ reg = <7>;
+ };
+};
+
+&switch {
+ ethernet-ports {
+
+ port0: port at 0 {
+ reg = <0>;
+ phy-handle = <&phy0>;
+ phys = <&serdes_hsio 0 SERDES1G(1) PHY_MODE_SGMII>;
+ };
+ port1: port at 1 {
+ reg = <1>;
+ phy-handle = <&phy1>;
+ phys = <&serdes_hsio 1 SERDES1G(2) PHY_MODE_SGMII>;
+ };
+ port2: port at 2 {
+ reg = <2>;
+ phy-handle = <&phy2>;
+ phys = <&serdes_hsio 2 SERDES1G(3) PHY_MODE_SGMII>;
+ };
+ port3: port at 3 {
+ reg = <3>;
+ phy-handle = <&phy3>;
+ phys = <&serdes_hsio 3 SERDES1G(4) PHY_MODE_SGMII>;
+ };
+ port4: port at 4 {
+ reg = <4>;
+ phy-handle = <&phy4>;
+ phys = <&serdes_hsio 4 SERDES1G(5) PHY_MODE_SGMII>;
+ };
+ port5: port at 5 {
+ reg = <5>;
+ phy-handle = <&phy5>;
+ phys = <&serdes_hsio 5 SERDES1G(6) PHY_MODE_SGMII>;
+ };
+ port6: port at 6 {
+ reg = <6>;
+ phy-handle = <&phy6>;
+ phys = <&serdes_hsio 6 SERDES1G(7) PHY_MODE_SGMII>;
+ };
+ port7: port at 7 {
+ reg = <7>;
+ phy-handle = <&phy7>;
+ phys = <&serdes_hsio 7 SERDES1G(8) PHY_MODE_SGMII>;
+ };
+ };
+};
diff --git a/arch/mips/dts/jr2_pcb111.dts b/arch/mips/dts/jr2_pcb111.dts
index 4d411b6..f37ebc7 100644
--- a/arch/mips/dts/jr2_pcb111.dts
+++ b/arch/mips/dts/jr2_pcb111.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include "mscc,jr2.dtsi"
+#include <dt-bindings/mscc/jr2_data.h>
/ {
model = "Jaguar2 Cu48 PCB111 Reference Board";
@@ -72,3 +73,402 @@
sgpio-ports = <0xff000000>;
gpio-ranges = <&sgpio2 0 0 96>;
};
+
+&mdio1 {
+ status = "okay";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+ phy2: ethernet-phy at 2 {
+ reg = <2>;
+ };
+ phy3: ethernet-phy at 3 {
+ reg = <3>;
+ };
+ phy4: ethernet-phy at 4 {
+ reg = <4>;
+ };
+ phy5: ethernet-phy at 5 {
+ reg = <5>;
+ };
+ phy6: ethernet-phy at 6 {
+ reg = <6>;
+ };
+ phy7: ethernet-phy at 7 {
+ reg = <7>;
+ };
+ phy8: ethernet-phy at 8 {
+ reg = <8>;
+ };
+ phy9: ethernet-phy at 9 {
+ reg = <9>;
+ };
+ phy10: ethernet-phy at 10 {
+ reg = <10>;
+ };
+ phy11: ethernet-phy at 11 {
+ reg = <11>;
+ };
+ phy12: ethernet-phy at 12 {
+ reg = <12>;
+ };
+ phy13: ethernet-phy at 13 {
+ reg = <13>;
+ };
+ phy14: ethernet-phy at 14 {
+ reg = <14>;
+ };
+ phy15: ethernet-phy at 15 {
+ reg = <15>;
+ };
+ phy16: ethernet-phy at 16 {
+ reg = <16>;
+ };
+ phy17: ethernet-phy at 17 {
+ reg = <17>;
+ };
+ phy18: ethernet-phy at 18 {
+ reg = <18>;
+ };
+ phy19: ethernet-phy at 19 {
+ reg = <19>;
+ };
+ phy20: ethernet-phy at 20 {
+ reg = <20>;
+ };
+ phy21: ethernet-phy at 21 {
+ reg = <21>;
+ };
+ phy22: ethernet-phy at 22 {
+ reg = <22>;
+ };
+ phy23: ethernet-phy at 23 {
+ reg = <23>;
+ };
+};
+
+&mdio2 {
+ status = "okay";
+
+ phy24: ethernet-phy at 24 {
+ reg = <0>;
+ };
+ phy25: ethernet-phy at 25 {
+ reg = <1>;
+ };
+ phy26: ethernet-phy at 26 {
+ reg = <2>;
+ };
+ phy27: ethernet-phy at 27 {
+ reg = <3>;
+ };
+ phy28: ethernet-phy at 28 {
+ reg = <4>;
+ };
+ phy29: ethernet-phy at 29 {
+ reg = <5>;
+ };
+ phy30: ethernet-phy at 30 {
+ reg = <6>;
+ };
+ phy31: ethernet-phy at 31 {
+ reg = <7>;
+ };
+ phy32: ethernet-phy at 32 {
+ reg = <8>;
+ };
+ phy33: ethernet-phy at 33 {
+ reg = <9>;
+ };
+ phy34: ethernet-phy at 34 {
+ reg = <10>;
+ };
+ phy35: ethernet-phy at 35 {
+ reg = <11>;
+ };
+ phy36: ethernet-phy at 36 {
+ reg = <12>;
+ };
+ phy37: ethernet-phy at 37 {
+ reg = <13>;
+ };
+ phy38: ethernet-phy at 38 {
+ reg = <14>;
+ };
+ phy39: ethernet-phy at 39 {
+ reg = <15>;
+ };
+ phy40: ethernet-phy at 40 {
+ reg = <16>;
+ };
+ phy41: ethernet-phy at 41 {
+ reg = <17>;
+ };
+ phy42: ethernet-phy at 42 {
+ reg = <18>;
+ };
+ phy43: ethernet-phy at 43 {
+ reg = <19>;
+ };
+ phy44: ethernet-phy at 44 {
+ reg = <20>;
+ };
+ phy45: ethernet-phy at 45 {
+ reg = <21>;
+ };
+ phy46: ethernet-phy at 46 {
+ reg = <22>;
+ };
+ phy47: ethernet-phy at 47 {
+ reg = <23>;
+ };
+};
+
+&switch {
+ ethernet-ports {
+ port0: port at 0 {
+ reg = <0>;
+ phy-handle = <&phy0>;
+ phys = <&serdes_hsio 0 SERDES6G(4) PHY_MODE_QSGMII>;
+ };
+ port1: port at 1 {
+ reg = <1>;
+ phy-handle = <&phy1>;
+ phys = <&serdes_hsio 1 0xff PHY_MODE_QSGMII>;
+ };
+ port2: port at 2 {
+ reg = <2>;
+ phy-handle = <&phy2>;
+ phys = <&serdes_hsio 2 0xff PHY_MODE_QSGMII>;
+ };
+ port3: port at 3 {
+ reg = <3>;
+ phy-handle = <&phy3>;
+ phys = <&serdes_hsio 3 0xff PHY_MODE_QSGMII>;
+ };
+ port4: port at 4 {
+ reg = <4>;
+ phy-handle = <&phy4>;
+ phys = <&serdes_hsio 4 SERDES6G(5) PHY_MODE_QSGMII>;
+ };
+ port5: port at 5 {
+ reg = <5>;
+ phy-handle = <&phy5>;
+ phys = <&serdes_hsio 5 0xff PHY_MODE_QSGMII>;
+ };
+ port6: port at 6 {
+ reg = <6>;
+ phy-handle = <&phy6>;
+ phys = <&serdes_hsio 6 0xff PHY_MODE_QSGMII>;
+ };
+ port7: port at 7 {
+ reg = <7>;
+ phy-handle = <&phy7>;
+ phys = <&serdes_hsio 7 0xff PHY_MODE_QSGMII>;
+ };
+ port8: port at 8 {
+ reg = <8>;
+ phy-handle = <&phy8>;
+ phys = <&serdes_hsio 8 SERDES6G(6) PHY_MODE_QSGMII>;
+ };
+ port9: port at 9 {
+ reg = <9>;
+ phy-handle = <&phy9>;
+ phys = <&serdes_hsio 9 0xff PHY_MODE_QSGMII>;
+ };
+ port10: port at 10 {
+ reg = <10>;
+ phy-handle = <&phy10>;
+ phys = <&serdes_hsio 10 0xff PHY_MODE_QSGMII>;
+ };
+ port11: port at 11 {
+ reg = <11>;
+ phy-handle = <&phy11>;
+ phys = <&serdes_hsio 11 0xff PHY_MODE_QSGMII>;
+ };
+ port12: port at 12 {
+ reg = <12>;
+ phy-handle = <&phy12>;
+ phys = <&serdes_hsio 12 SERDES6G(7) PHY_MODE_QSGMII>;
+ };
+ port13: port at 13 {
+ reg = <13>;
+ phy-handle = <&phy13>;
+ phys = <&serdes_hsio 13 0xff PHY_MODE_QSGMII>;
+ };
+ port14: port at 14 {
+ reg = <14>;
+ phy-handle = <&phy14>;
+ phys = <&serdes_hsio 14 0xff PHY_MODE_QSGMII>;
+ };
+ port15: port at 15 {
+ reg = <15>;
+ phy-handle = <&phy15>;
+ phys = <&serdes_hsio 15 0xff PHY_MODE_QSGMII>;
+ };
+ port16: port at 16 {
+ reg = <16>;
+ phy-handle = <&phy16>;
+ phys = <&serdes_hsio 16 SERDES6G(8) PHY_MODE_QSGMII>;
+ };
+ port17: port at 17 {
+ reg = <17>;
+ phy-handle = <&phy17>;
+ phys = <&serdes_hsio 17 0xff PHY_MODE_QSGMII>;
+ };
+ port18: port at 18 {
+ reg = <18>;
+ phy-handle = <&phy18>;
+ phys = <&serdes_hsio 18 0xff PHY_MODE_QSGMII>;
+ };
+ port19: port at 19 {
+ reg = <19>;
+ phy-handle = <&phy19>;
+ phys = <&serdes_hsio 19 0xff PHY_MODE_QSGMII>;
+ };
+ port20: port at 20 {
+ reg = <20>;
+ phy-handle = <&phy20>;
+ phys = <&serdes_hsio 20 SERDES6G(9) PHY_MODE_QSGMII>;
+ };
+ port21: port at 21 {
+ reg = <21>;
+ phy-handle = <&phy21>;
+ phys = <&serdes_hsio 21 0xff PHY_MODE_QSGMII>;
+ };
+ port22: port at 22 {
+ reg = <22>;
+ phy-handle = <&phy22>;
+ phys = <&serdes_hsio 22 0xff PHY_MODE_QSGMII>;
+ };
+ port23: port at 23 {
+ reg = <23>;
+ phy-handle = <&phy23>;
+ phys = <&serdes_hsio 23 0xff PHY_MODE_QSGMII>;
+ };
+ port24: port at 24 {
+ reg = <24>;
+ phy-handle = <&phy24>;
+ phys = <&serdes_hsio 24 SERDES6G(10) PHY_MODE_QSGMII>;
+ };
+ port25: port at 25 {
+ reg = <25>;
+ phy-handle = <&phy25>;
+ phys = <&serdes_hsio 25 0xff PHY_MODE_QSGMII>;
+ };
+ port26: port at 26 {
+ reg = <26>;
+ phy-handle = <&phy26>;
+ phys = <&serdes_hsio 26 0xff PHY_MODE_QSGMII>;
+ };
+ port27: port at 27 {
+ reg = <27>;
+ phy-handle = <&phy27>;
+ phys = <&serdes_hsio 27 0xff PHY_MODE_QSGMII>;
+ };
+ port28: port at 28 {
+ reg = <28>;
+ phy-handle = <&phy28>;
+ phys = <&serdes_hsio 28 SERDES6G(11) PHY_MODE_QSGMII>;
+ };
+ port29: port at 29 {
+ reg = <29>;
+ phy-handle = <&phy29>;
+ phys = <&serdes_hsio 29 0xff PHY_MODE_QSGMII>;
+ };
+ port30: port at 30 {
+ reg = <30>;
+ phy-handle = <&phy30>;
+ phys = <&serdes_hsio 30 0xff PHY_MODE_QSGMII>;
+ };
+ port31: port at 31 {
+ reg = <31>;
+ phy-handle = <&phy31>;
+ phys = <&serdes_hsio 31 0xff PHY_MODE_QSGMII>;
+ };
+ port32: port at 32 {
+ reg = <32>;
+ phy-handle = <&phy32>;
+ phys = <&serdes_hsio 32 SERDES6G(12) PHY_MODE_QSGMII>;
+ };
+ port33: port at 33 {
+ reg = <33>;
+ phy-handle = <&phy33>;
+ phys = <&serdes_hsio 33 0xff PHY_MODE_QSGMII>;
+ };
+ port34: port at 34 {
+ reg = <34>;
+ phy-handle = <&phy34>;
+ phys = <&serdes_hsio 34 0xff PHY_MODE_QSGMII>;
+ };
+ port35: port at 35 {
+ reg = <35>;
+ phy-handle = <&phy35>;
+ phys = <&serdes_hsio 35 0xff PHY_MODE_QSGMII>;
+ };
+ port36: port at 36 {
+ reg = <36>;
+ phy-handle = <&phy36>;
+ phys = <&serdes_hsio 36 SERDES6G(13) PHY_MODE_QSGMII>;
+ };
+ port37: port at 37 {
+ reg = <37>;
+ phy-handle = <&phy37>;
+ phys = <&serdes_hsio 37 0xff PHY_MODE_QSGMII>;
+ };
+ port38: port at 38 {
+ reg = <38>;
+ phy-handle = <&phy38>;
+ phys = <&serdes_hsio 38 0xff PHY_MODE_QSGMII>;
+ };
+ port39: port at 39 {
+ reg = <39>;
+ phy-handle = <&phy39>;
+ phys = <&serdes_hsio 39 0xff PHY_MODE_QSGMII>;
+ };
+ port40: port at 40 {
+ reg = <40>;
+ phy-handle = <&phy40>;
+ phys = <&serdes_hsio 40 SERDES6G(14) PHY_MODE_QSGMII>;
+ };
+ port41: port at 41 {
+ reg = <41>;
+ phy-handle = <&phy41>;
+ phys = <&serdes_hsio 41 0xff PHY_MODE_QSGMII>;
+ };
+ port42: port at 42 {
+ reg = <42>;
+ phy-handle = <&phy42>;
+ phys = <&serdes_hsio 42 0xff PHY_MODE_QSGMII>;
+ };
+ port43: port at 43 {
+ reg = <43>;
+ phy-handle = <&phy43>;
+ phys = <&serdes_hsio 43 0xff PHY_MODE_QSGMII>;
+ };
+ port44: port at 44 {
+ reg = <44>;
+ phy-handle = <&phy44>;
+ phys = <&serdes_hsio 44 SERDES6G(15) PHY_MODE_QSGMII>;
+ };
+ port45: port at 45 {
+ reg = <45>;
+ phy-handle = <&phy45>;
+ phys = <&serdes_hsio 45 0xff PHY_MODE_QSGMII>;
+ };
+ port46: port at 46 {
+ reg = <46>;
+ phy-handle = <&phy46>;
+ phys = <&serdes_hsio 46 0xff PHY_MODE_QSGMII>;
+ };
+ port47: port at 47 {
+ reg = <47>;
+ phy-handle = <&phy47>;
+ phys = <&serdes_hsio 47 0xff PHY_MODE_QSGMII>;
+ };
+ };
+};
diff --git a/arch/mips/dts/mscc,jr2.dtsi b/arch/mips/dts/mscc,jr2.dtsi
index 0900926..7f5a96f 100644
--- a/arch/mips/dts/mscc,jr2.dtsi
+++ b/arch/mips/dts/mscc,jr2.dtsi
@@ -183,5 +183,121 @@
gpio-bank-name = "sgpio2_";
sgpio-clock = <0x14>;
};
+
+ switch: switch at 1010000 {
+ compatible = "mscc,vsc7454-switch";
+ reg = <0x01040000 0x0100>, // VTSS_TO_DEV_0
+ <0x01050000 0x0100>, // VTSS_TO_DEV_1
+ <0x01060000 0x0100>, // VTSS_TO_DEV_2
+ <0x01070000 0x0100>, // VTSS_TO_DEV_3
+ <0x01080000 0x0100>, // VTSS_TO_DEV_4
+ <0x01090000 0x0100>, // VTSS_TO_DEV_5
+ <0x010a0000 0x0100>, // VTSS_TO_DEV_6
+ <0x010b0000 0x0100>, // VTSS_TO_DEV_7
+ <0x010c0000 0x0100>, // VTSS_TO_DEV_8
+ <0x010d0000 0x0100>, // VTSS_TO_DEV_9
+ <0x010e0000 0x0100>, // VTSS_TO_DEV_10
+ <0x010f0000 0x0100>, // VTSS_TO_DEV_11
+ <0x01100000 0x0100>, // VTSS_TO_DEV_12
+ <0x01110000 0x0100>, // VTSS_TO_DEV_13
+ <0x01120000 0x0100>, // VTSS_TO_DEV_14
+ <0x01130000 0x0100>, // VTSS_TO_DEV_15
+ <0x01140000 0x0100>, // VTSS_TO_DEV_16
+ <0x01150000 0x0100>, // VTSS_TO_DEV_17
+ <0x01160000 0x0100>, // VTSS_TO_DEV_18
+ <0x01170000 0x0100>, // VTSS_TO_DEV_19
+ <0x01180000 0x0100>, // VTSS_TO_DEV_20
+ <0x01190000 0x0100>, // VTSS_TO_DEV_21
+ <0x011a0000 0x0100>, // VTSS_TO_DEV_22
+ <0x011b0000 0x0100>, // VTSS_TO_DEV_23
+ <0x011c0000 0x0100>, // VTSS_TO_DEV_24
+ <0x011d0000 0x0100>, // VTSS_TO_DEV_25
+ <0x011e0000 0x0100>, // VTSS_TO_DEV_26
+ <0x011f0000 0x0100>, // VTSS_TO_DEV_27
+ <0x01200000 0x0100>, // VTSS_TO_DEV_28
+ <0x01210000 0x0100>, // VTSS_TO_DEV_29
+ <0x01220000 0x0100>, // VTSS_TO_DEV_30
+ <0x01230000 0x0100>, // VTSS_TO_DEV_31
+ <0x01240000 0x0100>, // VTSS_TO_DEV_32
+ <0x01250000 0x0100>, // VTSS_TO_DEV_33
+ <0x01260000 0x0100>, // VTSS_TO_DEV_34
+ <0x01270000 0x0100>, // VTSS_TO_DEV_35
+ <0x01280000 0x0100>, // VTSS_TO_DEV_36
+ <0x01290000 0x0100>, // VTSS_TO_DEV_37
+ <0x012a0000 0x0100>, // VTSS_TO_DEV_38
+ <0x012b0000 0x0100>, // VTSS_TO_DEV_39
+ <0x012c0000 0x0100>, // VTSS_TO_DEV_40
+ <0x012d0000 0x0100>, // VTSS_TO_DEV_41
+ <0x012e0000 0x0100>, // VTSS_TO_DEV_42
+ <0x012f0000 0x0100>, // VTSS_TO_DEV_43
+ <0x01300000 0x0100>, // VTSS_TO_DEV_44
+ <0x01310000 0x0100>, // VTSS_TO_DEV_45
+ <0x01320000 0x0100>, // VTSS_TO_DEV_46
+ <0x01330000 0x0100>, // VTSS_TO_DEV_47
+ <0x01f00000 0x100000>, // ANA_AC
+ <0x01d00000 0x100000>, // ANA_CL
+ <0x01e00000 0x100000>, // ANA_L2
+ <0x01410000 0x10000>, // ASM
+ <0x01460000 0x10000>, // HSIO
+ <0x01420000 0x00000>, // LRN
+ <0x017d0000 0x10000>, // QFWD
+ <0x01020000 0x20000>, // QS
+ <0x017e0000 0x10000>, // QSYS
+ <0x01b00000 0x80000>; // REW
+ reg-names = "port0", "port1", "port2", "port3", "port4",
+ "port5", "port6", "port7", "port8", "port9",
+ "port10", "port11", "port12", "port13",
+ "port14", "port15", "port16", "port17",
+ "port18", "port19", "port20", "port21",
+ "port22", "port23", "port24", "port25",
+ "port26", "port27", "port28", "port29",
+ "port30", "port31", "port32", "port33",
+ "port34", "port35", "port36", "port37",
+ "port38", "port39", "port40", "port41",
+ "port42", "port43", "port44", "port45",
+ "port46", "port47", "ana_ac", "ana_cl",
+ "ana_l2", "asm", "hsio", "lrn", "qfwd",
+ "qs", "qsys", "rew";
+ status = "okay";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ mdio0: mdio at 010100c8 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,jr2-miim";
+ reg = <0x010100c8 0x24>;
+ status = "disabled";
+ };
+
+ mdio1: mdio at 010100ec {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,jr2-miim";
+ reg = <0x010100ec 0x24>;
+ status = "disabled";
+ };
+
+ mdio2: mdio at 01010110 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,jr2-miim";
+ reg = <0x01010110 0x24>;
+ status = "disabled";
+ };
+
+ hsio: syscon at 10d0000 {
+ compatible = "mscc,jr2-hsio", "syscon", "simple-mfd";
+ reg = <0x10d0000 0x10000>;
+
+ serdes_hsio: serdes_hsio {
+ compatible = "mscc,vsc7454-serdes";
+ #phy-cells = <3>;
+ };
+ };
};
};
diff --git a/arch/mips/dts/serval2_pcb112.dts b/arch/mips/dts/serval2_pcb112.dts
index fe025f4..7a9d595 100644
--- a/arch/mips/dts/serval2_pcb112.dts
+++ b/arch/mips/dts/serval2_pcb112.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include "mscc,jr2.dtsi"
+#include <dt-bindings/mscc/jr2_data.h>
/ {
model = "Serval2 NID PCB112 Reference Board";
@@ -58,3 +59,46 @@
status = "okay";
sgpio-ports = <0x3fe0ffff>;
};
+
+&mdio0 {
+ status = "okay";
+
+ phy16: ethernet-phy at 16 {
+ reg = <16>;
+ };
+ phy17: ethernet-phy at 17 {
+ reg = <17>;
+ };
+ phy18: ethernet-phy at 18 {
+ reg = <18>;
+ };
+ phy19: ethernet-phy at 19 {
+ reg = <19>;
+ };
+};
+
+&switch {
+ ethernet-ports {
+
+ port0: port at 0 {
+ reg = <24>;
+ phy-handle = <&phy16>;
+ phys = <&serdes_hsio 24 SERDES6G(0) PHY_MODE_SGMII>;
+ };
+ port1: port at 1 {
+ reg = <25>;
+ phy-handle = <&phy17>;
+ phys = <&serdes_hsio 25 SERDES6G(1) PHY_MODE_SGMII>;
+ };
+ port2: port at 2 {
+ reg = <26>;
+ phy-handle = <&phy18>;
+ phys = <&serdes_hsio 26 SERDES6G(2) PHY_MODE_SGMII>;
+ };
+ port3: port at 3 {
+ reg = <27>;
+ phy-handle = <&phy19>;
+ phys = <&serdes_hsio 27 SERDES6G(3) PHY_MODE_SGMII>;
+ };
+ };
+};
diff --git a/include/dt-bindings/mscc/jr2_data.h b/include/dt-bindings/mscc/jr2_data.h
new file mode 100644
index 0000000..2f06fc5
--- /dev/null
+++ b/include/dt-bindings/mscc/jr2_data.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef _JR2_DATA_H_
+#define _JR2_DATA_H_
+
+#define SERDES1G(x) (x)
+#define SERDES1G_MAX SERDES1G(10)
+#define SERDES6G(x) (SERDES1G_MAX + 1 + (x))
+#define SERDES6G_MAX SERDES6G(17)
+#define SERDES_MAX (SERDES6G_MAX + 1)
+
+/* similar with phy_interface_t */
+#define PHY_MODE_SGMII 2
+#define PHY_MODE_QSGMII 4
+
+#endif
--
2.7.4
More information about the U-Boot
mailing list