[U-Boot] [PATCHv4 05/12] pci: ls_pcie_g4: add device tree fixups for PCI Stream IDs
Z.q. Hou
zhiqiang.hou at nxp.com
Mon Mar 11 02:58:13 UTC 2019
From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
Add the infrastructure for Layerscape SoCs PCIe Gen4 controller
to update device tree nodes to convey SMMU stream IDs in the
device tree.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
V4:
- No change
drivers/pci/Makefile | 3 +-
drivers/pci/pcie_layerscape_gen4.c | 5 -
drivers/pci/pcie_layerscape_gen4_fixup.c | 249 +++++++++++++++++++++++
3 files changed, 251 insertions(+), 6 deletions(-)
create mode 100644 drivers/pci/pcie_layerscape_gen4_fixup.c
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 7f585aad55..8ee828af6d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
obj-$(CONFIG_PCIE_DW_MVEBU) += pcie_dw_mvebu.o
obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o
obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape_fixup.o
-obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie_layerscape_gen4.o
+obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie_layerscape_gen4.o \
+ pcie_layerscape_gen4_fixup.o
obj-$(CONFIG_PCI_XILINX) += pcie_xilinx.o
obj-$(CONFIG_PCIE_INTEL_FPGA) += pcie_intel_fpga.o
diff --git a/drivers/pci/pcie_layerscape_gen4.c b/drivers/pci/pcie_layerscape_gen4.c
index fbe7d35911..4e0d5b168e 100644
--- a/drivers/pci/pcie_layerscape_gen4.c
+++ b/drivers/pci/pcie_layerscape_gen4.c
@@ -570,8 +570,3 @@ U_BOOT_DRIVER(pcie_layerscape_gen4) = {
.probe = ls_pcie_g4_probe,
.priv_auto_alloc_size = sizeof(struct ls_pcie_g4),
};
-
-/* No any fixup so far */
-void ft_pci_setup(void *blob, bd_t *bd)
-{
-}
diff --git a/drivers/pci/pcie_layerscape_gen4_fixup.c b/drivers/pci/pcie_layerscape_gen4_fixup.c
new file mode 100644
index 0000000000..ceeea17f19
--- /dev/null
+++ b/drivers/pci/pcie_layerscape_gen4_fixup.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2018 NXP
+ *
+ * PCIe Gen4 driver for NXP Layerscape SoCs
+ * Author: Hou Zhiqiang <Minder.Hou at gmail.com>
+ *
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/io.h>
+#include <errno.h>
+#ifdef CONFIG_OF_BOARD_SETUP
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#ifdef CONFIG_ARM
+#include <asm/arch/clock.h>
+#endif
+#include "pcie_layerscape_gen4.h"
+
+#if defined(CONFIG_FSL_LSCH3) || defined(CONFIG_FSL_LSCH2)
+/*
+ * Return next available LUT index.
+ */
+static int ls_pcie_g4_next_lut_index(struct ls_pcie_g4 *pcie)
+{
+ if (pcie->next_lut_index < PCIE_LUT_ENTRY_COUNT)
+ return pcie->next_lut_index++;
+
+ return -ENOSPC; /* LUT is full */
+}
+
+/* returns the next available streamid for pcie, -errno if failed */
+static int ls_pcie_g4_next_streamid(struct ls_pcie_g4 *pcie)
+{
+ int stream_id = pcie->stream_id_cur;
+
+ if (stream_id > FSL_PEX_STREAM_ID_NUM)
+ return -EINVAL;
+
+ pcie->stream_id_cur++;
+
+ return stream_id | ((pcie->idx + 1) << 11);
+}
+
+/*
+ * Program a single LUT entry
+ */
+static void ls_pcie_g4_lut_set_mapping(struct ls_pcie_g4 *pcie, int index,
+ u32 devid, u32 streamid)
+{
+ /* leave mask as all zeroes, want to match all bits */
+ lut_writel(pcie, devid << 16, PCIE_LUT_UDR(index));
+ lut_writel(pcie, streamid | PCIE_LUT_ENABLE, PCIE_LUT_LDR(index));
+}
+
+/*
+ * An msi-map is a property to be added to the pci controller
+ * node. It is a table, where each entry consists of 4 fields
+ * e.g.:
+ *
+ * msi-map = <[devid] [phandle-to-msi-ctrl] [stream-id] [count]
+ * [devid] [phandle-to-msi-ctrl] [stream-id] [count]>;
+ */
+static void fdt_pcie_set_msi_map_entry(void *blob, struct ls_pcie_g4 *pcie,
+ u32 devid, u32 streamid)
+{
+ u32 *prop;
+ u32 phandle;
+ int nodeoff;
+
+#ifdef CONFIG_FSL_PCIE_COMPAT
+ nodeoff = fdt_node_offset_by_compat_reg(blob, CONFIG_FSL_PCIE_COMPAT,
+ pcie->ccsr_res.start);
+#else
+#error "No CONFIG_FSL_PCIE_COMPAT defined"
+#endif
+ if (nodeoff < 0) {
+ debug("%s: ERROR: failed to find pcie compatiable\n", __func__);
+ return;
+ }
+
+ /* get phandle to MSI controller */
+ prop = (u32 *)fdt_getprop(blob, nodeoff, "msi-parent", 0);
+ if (!prop) {
+ debug("\n%s: ERROR: missing msi-parent: PCIe%d\n",
+ __func__, pcie->idx);
+ return;
+ }
+ phandle = fdt32_to_cpu(*prop);
+
+ /* set one msi-map row */
+ fdt_appendprop_u32(blob, nodeoff, "msi-map", devid);
+ fdt_appendprop_u32(blob, nodeoff, "msi-map", phandle);
+ fdt_appendprop_u32(blob, nodeoff, "msi-map", streamid);
+ fdt_appendprop_u32(blob, nodeoff, "msi-map", 1);
+}
+
+/*
+ * An iommu-map is a property to be added to the pci controller
+ * node. It is a table, where each entry consists of 4 fields
+ * e.g.:
+ *
+ * iommu-map = <[devid] [phandle-to-iommu-ctrl] [stream-id] [count]
+ * [devid] [phandle-to-iommu-ctrl] [stream-id] [count]>;
+ */
+static void fdt_pcie_set_iommu_map_entry(void *blob, struct ls_pcie_g4 *pcie,
+ u32 devid, u32 streamid)
+{
+ u32 *prop;
+ u32 iommu_map[4];
+ int nodeoff;
+ int lenp;
+
+#ifdef CONFIG_FSL_PCIE_COMPAT
+ nodeoff = fdt_node_offset_by_compat_reg(blob, CONFIG_FSL_PCIE_COMPAT,
+ pcie->ccsr_res.start);
+#else
+#error "No CONFIG_FSL_PCIE_COMPAT defined"
+#endif
+ if (nodeoff < 0) {
+ debug("%s: ERROR: failed to find pcie compatiable\n", __func__);
+ return;
+ }
+
+ /* get phandle to iommu controller */
+ prop = fdt_getprop_w(blob, nodeoff, "iommu-map", &lenp);
+ if (!prop) {
+ debug("\n%s: ERROR: missing iommu-map: PCIe%d\n",
+ __func__, pcie->idx);
+ return;
+ }
+
+ /* set iommu-map row */
+ iommu_map[0] = cpu_to_fdt32(devid);
+ iommu_map[1] = *++prop;
+ iommu_map[2] = cpu_to_fdt32(streamid);
+ iommu_map[3] = cpu_to_fdt32(1);
+
+ if (devid == 0)
+ fdt_setprop_inplace(blob, nodeoff, "iommu-map", iommu_map, 16);
+ else
+ fdt_appendprop(blob, nodeoff, "iommu-map", iommu_map, 16);
+}
+
+static void fdt_fixup_pcie(void *blob)
+{
+ struct udevice *dev, *bus;
+ struct ls_pcie_g4 *pcie;
+ int streamid;
+ int index;
+ pci_dev_t bdf;
+
+ /* Scan all known buses */
+ for (pci_find_first_device(&dev); dev; pci_find_next_device(&dev)) {
+ for (bus = dev; device_is_on_pci_bus(bus);)
+ bus = bus->parent;
+ pcie = dev_get_priv(bus);
+
+ streamid = ls_pcie_g4_next_streamid(pcie);
+ if (streamid < 0) {
+ debug("ERROR: no stream ids free\n");
+ continue;
+ }
+
+ index = ls_pcie_g4_next_lut_index(pcie);
+ if (index < 0) {
+ debug("ERROR: no LUT indexes free\n");
+ continue;
+ }
+
+ /* the DT fixup must be relative to the hose first_busno */
+ bdf = dm_pci_get_bdf(dev) - PCI_BDF(bus->seq, 0, 0);
+ /* map PCI b.d.f to streamID in LUT */
+ ls_pcie_g4_lut_set_mapping(pcie, index, bdf >> 8, streamid);
+ /* update msi-map in device tree */
+ fdt_pcie_set_msi_map_entry(blob, pcie, bdf >> 8, streamid);
+ /* update iommu-map in device tree */
+ fdt_pcie_set_iommu_map_entry(blob, pcie, bdf >> 8, streamid);
+ }
+}
+#endif
+
+static void ft_pcie_ep_layerscape_gen4_fix(void *blob, struct ls_pcie_g4 *pcie)
+{
+ int off;
+
+ off = fdt_node_offset_by_compat_reg(blob, "fsl,lx2160a-pcie-ep",
+ pcie->ccsr_res.start);
+
+ if (off < 0) {
+ debug("%s: ERROR: failed to find pcie compatiable\n",
+ __func__);
+ return;
+ }
+
+ if (pcie->enabled && pcie->mode == PCI_HEADER_TYPE_NORMAL)
+ fdt_set_node_status(blob, off, FDT_STATUS_OKAY, 0);
+ else
+ fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+}
+
+static void ft_pcie_rc_layerscape_gen4_fix(void *blob, struct ls_pcie_g4 *pcie)
+{
+ int off;
+
+#ifdef CONFIG_FSL_PCIE_COMPAT
+ off = fdt_node_offset_by_compat_reg(blob, CONFIG_FSL_PCIE_COMPAT,
+ pcie->ccsr_res.start);
+#else
+#error "No CONFIG_FSL_PCIE_COMPAT defined"
+#endif
+ if (off < 0) {
+ debug("%s: ERROR: failed to find pcie compatiable\n", __func__);
+ return;
+ }
+
+ if (pcie->enabled && pcie->mode == PCI_HEADER_TYPE_BRIDGE)
+ fdt_set_node_status(blob, off, FDT_STATUS_OKAY, 0);
+ else
+ fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+}
+
+static void ft_pcie_layerscape_gen4_setup(void *blob, struct ls_pcie_g4 *pcie)
+{
+ ft_pcie_rc_layerscape_gen4_fix(blob, pcie);
+ ft_pcie_ep_layerscape_gen4_fix(blob, pcie);
+}
+
+/* Fixup Kernel DT for PCIe */
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+ struct ls_pcie_g4 *pcie;
+
+ list_for_each_entry(pcie, &ls_pcie_g4_list, list)
+ ft_pcie_layerscape_gen4_setup(blob, pcie);
+
+#if defined(CONFIG_FSL_LSCH3) || defined(CONFIG_FSL_LSCH2)
+ fdt_fixup_pcie(blob);
+#endif
+}
+
+#else /* !CONFIG_OF_BOARD_SETUP */
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+}
+#endif
--
2.17.1
More information about the U-Boot
mailing list