[U-Boot] [PATCH] ARM: da850evm: Remove legacy MMC code

[Adam Ford]

With the migration to DM in SPL and the DT support, the
old legacy code is no longer neaded, so this patch removes it

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index e8ec553f99..1bc26828bf 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -204,25 +204,6 @@ int misc_init_r(void)
 	return 0;
 }
 
-#ifndef CONFIG_DM_MMC
-#ifdef CONFIG_MMC_DAVINCI
-static struct davinci_mmc mmc_sd0 = {
-	.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
-	.host_caps = MMC_MODE_4BIT,     /* DA850 supports only 4-bit SD/MMC */
-	.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version = MMC_CTLR_VERSION_2,
-};
-
-int board_mmc_init(bd_t *bis)
-{
-	mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
-
-	/* Add slot-0 to mmc subsystem */
-	return davinci_mmc_init(bis, &mmc_sd0);
-}
-#endif
-#endif
-
 static const struct pinmux_config gpio_pins[] = {
 #ifdef CONFIG_USE_NOR
 	/* GP0[11] is required for NOR to work on Rev 3 EVMs */
-- 
2.17.1