[U-Boot] [U-Boot, v1, 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements

sbabic at denx.de sbabic at denx.de
Wed Mar 13 09:29:57 UTC 2019


> From: Max Krummenacher <max.krummenacher at toradex.com>
> Colibri iMX6 V1.1 HW can use the PMIC GEN3 to power the NVCC_SD1.
> Change the settings fused into the PMIC's OTP to powerup with
> GEN3 set to output 3.3V.
> Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
> Acked-by: Stefan Agner <stefan.agner at toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Applied to u-boot-imx, -next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================



More information about the U-Boot mailing list