[U-Boot] [U-BOOT][V2 PATCH] configs: icore: Fix U-Boot proper loading from nand

Shyam Saini shyam.saini at amarulasolutions.com
Fri Mar 8 06:48:05 UTC 2019


From: Michael Trimarchi <michael at amarulasolutions.com>

SPL on Engicam i.Core M6 boards enabled DM, so it would require some
malloc() pool before relocation in order to load U-Boot proper properly.

So, enable SPL malloc() pool of 0x2000 size similarly like what we have
used for icore mmc defconfigs.

Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>
Tested-by: Shyam Saini <shyam.saini at amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
---
 configs/imx6dl_icore_nand_defconfig | 1 +
 configs/imx6q_icore_nand_defconfig  | 1 +
 2 files changed, 2 insertions(+)

diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig
index c34c515080e9..69c45b948b3a 100644
--- a/configs/imx6dl_icore_nand_defconfig
+++ b/configs/imx6dl_icore_nand_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_MX6Q_ENGICAM=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig
index cf149d615b32..b53a5010e5dd 100644
--- a/configs/imx6q_icore_nand_defconfig
+++ b/configs/imx6q_icore_nand_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_MX6Q_ENGICAM=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
-- 
2.11.0



More information about the U-Boot mailing list