[U-Boot] [PATCH v2 00/15] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
Thierry Reding
thierry.reding at gmail.com
Tue Mar 26 17:19:50 UTC 2019
On Tue, Mar 26, 2019 at 04:06:46PM +0000, Peter Robinson wrote:
> > > > This set of patches move some code from the Tegra186 SoC specific
> > > > directory to a common location so that it can be more easily shared.
> > > > Since the differences between Tegra186 and earlier generations are
> > > > now very small, the builds are unified to avoid duplication of code.
> > > >
> > > > We also add support for accessing the PMC on systems where it can only
> > > > be accessed from TrustZone.
> > > >
> > > > Finally, all of this is used to implement support for the recently
> > > > announced NVIDIA Jetson Nano Developer Kit.
> > > >
> > > > These patches, along with patches to enable network booting[0], can also
> > > > be found in the p3450 branch of the following repository:
> > > >
> > > > https://github.com/thierryreding/u-boot
> > >
> > > I've tested this on both the Jetson TX1 and TX2 and I've very pleased
> > > to see this series. Overall it works fine with the 28.x SDK I've
> > > tested with in the past. I have one problem, which I also saw with my
> > > previous hacked up version of the NV patches I had to boot the TX1
> > > with cboot, when booting with UEFI I get the early boot crash below
> > > (earlyprintk cmd line args need) but if I put a line in the grub.cfg
> > > for grub to load the devicetree it boots fine. I suspect, but aren't
> > > entirely sure, that the fdt_addr_r is getting stomped on somewhere, or
> > > is inaccessible, when booted with UEFI where it's fine with extlinux
> > > booting.
> >
> > I'm not sure I understand exactly how UEFI boot works in conjunction
> > with U-Boot. Where does the FDT come from in that set up? Does U-Boot
>
> It's similar to the extlinux support in that it loads it off the disk
> if it can find it from the kernel. In my case I tried loading it from
> one provided by the kernel on the U-Boot cmd line and running it
> manually:
>
> load mmc 1:1 ${kernel_addr_r} efi/fedora/grubaa64.efi
> load mmc 1:2 ${fdt_addr_r} /dtb/nvidia/tegra186-p2771-0000.dtb
> bootefi ${kernel_addr_r} ${fdt_addr_r}
>
> The above crashed with the one below, if I load it by adding the line
> below to the grub config it boots fine.
> devicetree ($root)/dtb/nvidia/tegra186-p2771-0000.dtb
>
> > already load it from somewhere and pass it to Linux via UEFI? Or does
> > U-Boot pass on its builtin FDT? If the latter, that's not something
> > that we currently support, so I'm not surprised that it doesn't work.
>
> So if U-Boot can't fine it on disk it will fail back to the one
> provided by U-Boot but in the above that's not the case.
I think it is. If you look at the following line from the log you
posted:
[ 0.000000] Machine model: NVIDIA P2771-0000-500
that string matches exactly what's in the DTB that ships with U-Boot,
whereas upstream Linux uses this model string:
NVIDIA Tegra186 P2771-0000 Development Board
> > Given the error message before the crash, I think you might get a little
> > further if you copy the "timer" node from Linux's tegra186.dtsi to that
> > in U-Boot.
>
> Possibly but I don't believe it's using the U-Boot DT, at least based
> on my experience from all the other platforms we support it should be
> loading the kernel provided one off disk, unless the U-Boot it
> stomping on that one some how later in the process.
Given the above I don't think it's using the U-Boot that you've loaded
from disk, unless the version you have on disk is not the one installed
by Linux.
Thierry
> > > EFI stub: Booting Linux Kernel...
> > > EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied
> > > EFI stub: Using DTB from configuration table
> > > EFI stub: Exiting boot services and installing virtual address map...
> > > [ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x411fd073]
> > > [ 0.000000] Linux version 5.1.0-0.rc1.git0.1.fc29.aarch64
> > > (perobins at morpheus.roving-it.com) (gcc version 8.1.1 20180626 (Red Hat
> > > Cross 8.1.1-3) (GCC)) #1 SMP Tue Mar 19 16:05:25 GMT 2019
> > > [ 0.000000] Machine model: NVIDIA P2771-0000-500
> > > [ 0.000000] efi: Getting EFI parameters from FDT:
> > > [ 0.000000] efi: EFI v2.70 by Das U-Boot
> > > [ 0.000000] efi: SMBIOS=0xefffb000 MEMRESERVE=0xd0915040
> > > [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000
> > > [ 0.000000] earlycon: uart0 at MMIO 0x0000000003100000 (options '')
> > > [ 0.000000] printk: bootconsole [uart0] enabled
> > > [ 0.000000] NUMA: No NUMA configuration found
> > > [ 0.000000] NUMA: Faking a node at [mem
> > > 0x0000000080000000-0x00000002767fffff]
> > > [ 0.000000] NUMA: NODE_DATA [mem 0x2751f1780-0x2751fefff]
> > > [ 0.000000] Zone ranges:
> > > [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
> > > [ 0.000000] Normal [mem 0x0000000100000000-0x00000002767fffff]
> > > [ 0.000000] Movable zone start for each node
> > > [ 0.000000] Early memory node ranges
> > > [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087efafff]
> > > [ 0.000000] node 0: [mem 0x0000000087efb000-0x0000000087f04fff]
> > > [ 0.000000] node 0: [mem 0x0000000087f05000-0x00000000efff7fff]
> > > [ 0.000000] node 0: [mem 0x00000000efff8000-0x00000000efffffff]
> > > [ 0.000000] node 0: [mem 0x00000000f0200000-0x0000000275ffffff]
> > > [ 0.000000] node 0: [mem 0x0000000276600000-0x00000002767fffff]
> > > [ 0.000000] Zeroed struct page in unavailable ranges: 18 pages
> > > [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000002767fffff]
> > > [ 0.000000] On node 0 totalpages: 2056192
> > > [ 0.000000] DMA32 zone: 8192 pages used for memmap
> > > [ 0.000000] DMA32 zone: 0 pages reserved
> > > [ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63
> > > [ 0.000000] Normal zone: 23968 pages used for memmap
> > > [ 0.000000] Normal zone: 1532416 pages, LIFO batch:63
> > > [ 0.000000] Failed to find device node for boot cpu
> > > [ 0.000000] missing boot CPU MPIDR, not enabling secondaries
> > > [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55064
> > > r8192 d30952 u94208
> > > [ 0.000000] pcpu-alloc: s55064 r8192 d30952 u94208 alloc=23*4096
> > > [ 0.000000] pcpu-alloc: [0] 0
> > > [ 0.000000] Detected PIPT I-cache on CPU0
> > > [ 0.000000] CPU features: detected: EL2 vector hardening
> > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2024032
> > > [ 0.000000] Policy zone: Normal
> > > [ 0.000000] Kernel command line:
> > > BOOT_IMAGE=(hd0,msdos2)/vmlinuz-5.1.0-0.rc1.git0.1.fc29.aarch64
> > > root=UUID=fe563825-bdab-461d-9cbf-e340a971fa61 ro console=ttyS0,115200
> > > earlycon uefi_debug earlyprintk=serial,ttyS0,115200 debug
> > > [ 0.000000] software IO TLB: mapped [mem 0xf7fff000-0xfbfff000] (64MB)
> > > [ 0.000000] Memory: 7889768K/8224768K available (11068K kernel
> > > code, 2032K rwdata, 4808K rodata, 5952K init, 935K bss, 269464K
> > > reserved, 65536K cma-reserved)
> > > [ 0.000000] random: get_random_u64 called from
> > > kmem_cache_open+0x3c/0x4c0 with crng_init=0
> > > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> > > [ 0.000000] ftrace: allocating 40204 entries in 158 pages
> > > [ 0.000000] rcu: Hierarchical RCU implementation.
> > > [ 0.000000] rcu:RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
> > > [ 0.000000] Tasks RCU enabled.
> > > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> > > is 10 jiffies.
> > > [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
> > > [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> > > [ 0.000000] GIC: Using split EOI/Deactivate mode
> > > [ 0.000000] timer_probe: no matching timers found
> > > [ 0.000000] Kernel panic - not syncing: Unable to initialise
> > > architected timer.
> > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
> > > 5.1.0-0.rc1.git0.1.fc29.aarch64 #1
> > > [ 0.000000] Hardware name: NVIDIA P2771-0000-500 (DT)
> > > [ 0.000000] Call trace:
> > > [ 0.000000] dump_backtrace+0x0/0x128
> > > [ 0.000000] show_stack+0x24/0x30
> > > [ 0.000000] dump_stack+0xa8/0xcc
> > > [ 0.000000] panic+0x12c/0x2dc
> > > [ 0.000000] time_init+0x34/0x4c
> > > [ 0.000000] start_kernel+0x354/0x4c0
> > > [ 0.000000] ---[ end Kernel panic - not syncing: Unable to
> > > initialise architected timer. ]---
> > >
> > >
> > > > Thanks,
> > > > Thierry
> > > >
> > > > [0]: http://patchwork.ozlabs.org/project/uboot/list/?series=96153
> > > >
> > > > Thierry Reding (15):
> > > > ARM: tegra: Use common header for PMU declarations
> > > > ARM: tegra: Guard clock code with a Kconfig symbol
> > > > ARM: tegra: Guard GP pad control code with a Kconfig symbol
> > > > ARM: tegra: Guard memory controller code with a Kconfig symbol
> > > > ARM: tegra: Guard pin controller code with a Kconfig symbol
> > > > ARM: tegra: Guard powergate code with a Kconfig symbol
> > > > ARM: tegra: Fix save_boot_params() prototype
> > > > ARM: tegra: Allow boards to override boot target devices
> > > > ARM: tegra: Support TZ-only access to PMC
> > > > ARM: tegra: Workaround UDC boot issues only if necessary
> > > > ARM: tegra: Restore DRAM bank count
> > > > ARM: tegra: Unify Tegra186 builds
> > > > ARM: tegra: Implement cboot_save_boot_params() in C
> > > > ARM: tegra: Implement cboot_get_ethaddr()
> > > > ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
> > > >
> > > > arch/arm/dts/tegra210-p3450-0000.dts | 130 ++++++++
> > > > arch/arm/include/asm/arch-tegra/cboot.h | 45 +++
> > > > arch/arm/include/asm/arch-tegra/pmc.h | 20 +-
> > > > .../asm/{arch-tegra20 => arch-tegra}/pmu.h | 6 +-
> > > > arch/arm/include/asm/arch-tegra/tegra.h | 6 +
> > > > arch/arm/include/asm/arch-tegra114/pmu.h | 12 -
> > > > arch/arm/include/asm/arch-tegra124/pmu.h | 13 -
> > > > arch/arm/include/asm/arch-tegra210/pmu.h | 13 -
> > > > arch/arm/include/asm/arch-tegra30/pmu.h | 12 -
> > > > arch/arm/mach-tegra/Kconfig | 31 ++
> > > > arch/arm/mach-tegra/Makefile | 16 +-
> > > > arch/arm/mach-tegra/board.c | 41 ++-
> > > > arch/arm/mach-tegra/board186.c | 32 --
> > > > arch/arm/mach-tegra/board2.c | 37 ++-
> > > > arch/arm/mach-tegra/cache.c | 2 +
> > > > .../{tegra186/nvtboot_board.c => cboot.c} | 280 ++++++++++++++++--
> > > > arch/arm/mach-tegra/clock.c | 13 +-
> > > > arch/arm/mach-tegra/cmd_enterrcm.c | 6 +-
> > > > arch/arm/mach-tegra/cpu.c | 20 +-
> > > > arch/arm/mach-tegra/emc.c | 2 +-
> > > > arch/arm/mach-tegra/lowlevel_init.S | 39 ---
> > > > arch/arm/mach-tegra/pmc.c | 92 ++++++
> > > > arch/arm/mach-tegra/powergate.c | 11 +-
> > > > arch/arm/mach-tegra/tegra186/Makefile | 4 -
> > > > arch/arm/mach-tegra/tegra186/nvtboot_ll.S | 20 --
> > > > arch/arm/mach-tegra/tegra186/nvtboot_mem.c | 172 -----------
> > > > arch/arm/mach-tegra/tegra210/Kconfig | 7 +
> > > > board/nvidia/p2771-0000/p2771-0000.c | 10 +-
> > > > board/nvidia/p3450-0000/Kconfig | 12 +
> > > > board/nvidia/p3450-0000/MAINTAINERS | 6 +
> > > > board/nvidia/p3450-0000/Makefile | 8 +
> > > > board/nvidia/p3450-0000/p3450-0000.c | 143 +++++++++
> > > > .../p3450-0000/pinmux-config-p3450-0000.h | 257 ++++++++++++++++
> > > > configs/p2771-0000-000_defconfig | 2 +-
> > > > configs/p2771-0000-500_defconfig | 2 +-
> > > > configs/p3450-0000_defconfig | 54 ++++
> > > > include/configs/p3450-0000.h | 44 +++
> > > > include/configs/tegra-common-post.h | 2 +
> > > > 38 files changed, 1230 insertions(+), 392 deletions(-)
> > > > create mode 100644 arch/arm/dts/tegra210-p3450-0000.dts
> > > > create mode 100644 arch/arm/include/asm/arch-tegra/cboot.h
> > > > rename arch/arm/include/asm/{arch-tegra20 => arch-tegra}/pmu.h (73%)
> > > > delete mode 100644 arch/arm/include/asm/arch-tegra114/pmu.h
> > > > delete mode 100644 arch/arm/include/asm/arch-tegra124/pmu.h
> > > > delete mode 100644 arch/arm/include/asm/arch-tegra210/pmu.h
> > > > delete mode 100644 arch/arm/include/asm/arch-tegra30/pmu.h
> > > > delete mode 100644 arch/arm/mach-tegra/board186.c
> > > > rename arch/arm/mach-tegra/{tegra186/nvtboot_board.c => cboot.c} (50%)
> > > > delete mode 100644 arch/arm/mach-tegra/lowlevel_init.S
> > > > create mode 100644 arch/arm/mach-tegra/pmc.c
> > > > delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_ll.S
> > > > delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_mem.c
> > > > create mode 100644 board/nvidia/p3450-0000/Kconfig
> > > > create mode 100644 board/nvidia/p3450-0000/MAINTAINERS
> > > > create mode 100644 board/nvidia/p3450-0000/Makefile
> > > > create mode 100644 board/nvidia/p3450-0000/p3450-0000.c
> > > > create mode 100644 board/nvidia/p3450-0000/pinmux-config-p3450-0000.h
> > > > create mode 100644 configs/p3450-0000_defconfig
> > > > create mode 100644 include/configs/p3450-0000.h
> > > >
> > > > --
> > > > 2.21.0
> > > >
> > > > _______________________________________________
> > > > U-Boot mailing list
> > > > U-Boot at lists.denx.de
> > > > https://lists.denx.de/listinfo/u-boot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190326/4491b456/attachment.sig>
More information about the U-Boot
mailing list