[U-Boot] [PATCH 4/4] Makefile: Correct logic for DM_SCSI + unconverted drivers check

Stefan Roese sr at denx.de
Tue Mar 12 06:45:04 UTC 2019


On 11.03.19 15:09, Tom Rini wrote:
> On Mon, Mar 11, 2019 at 01:29:23PM +0100, Stefan Roese wrote:
> 
>> When checking for boards that are enabling a SATA driver that isn't
>> converted to DM yet we need to be sure to not also trip over boards that
>> do set CONFIG_AHCI & CONFIG_BLK by itself, as that is not a bug.
>>
>> This was detected when converting the Armada XP SATA driver sata_mv.c
>> to DM with AHCI & BLK support. This warning is still printed without
>> this patch applied here.
>>
>> Signed-off-by: Stefan Roese <sr at denx.de>
>> Cc: Simon Glass <sjg at chromium.org>
>> Cc: Tom Rini <trini at konsulko.com>
>> ---
>>   Makefile | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/Makefile b/Makefile
>> index 26db4e7b59..896e0c3350 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -940,6 +940,7 @@ endif
>>   endif
>>   ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
>>   ifneq ($(CONFIG_DM_SCSI),y)
>> +ifneq ($(CONFIG_BLK)$(CONFIG_AHCI),yy)
>>   	@echo >&2 "===================== WARNING ======================"
>>   	@echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
>>   	@echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
> 
> OK, I think we need to properly clarify the logic, and perhaps I was
> being too clever trying to catch all of the cases under drivers/ata that
> aren't converted yet.  We have, after your patches, afaict:
> - MVSATA_IDE
> - DWC_AHSATA
> - FSL_SATA
> - SATA_SIL
> - SATA_SIL3114
> 
> Of these, MVSATA_IDE has no further deps.  Everything else depends on
> LIBATA.  Before SATA_MV was converted, everything that was converted
> depends on DM_SCSI and AHCI.  So I made my messages / logic like the
> above.  But perhaps the right answer really is:
> 1) MVSATA_IDE alone.
> 2) LIBATA && !AHCI
> 
> So... we can just re-work the second part of the check logic to be what
> you added, as all converted drivers under drivers/ata will be both
> BLK&&AHCI enabled.

I'll work on a v2 of this patch shortly.
  
> And also as you note, it's not quite AHCI as the controller in question
> here isn't AHCI-compatible, but is SATA, so a fixup / rename of some
> CONFIG checks in code / Kconfig is in order, somewhere, but perhaps
> after conversion?

I agree.

>  Also, probably some re-organization of drivers/block,
> drivers/ide, drivers/ata, drivers/nvme (and common/usb_storage.c) too,
> to be more consistent.

Yes, that could also be helpful.

Thanks,
Stefan


More information about the U-Boot mailing list