[U-Boot] [PATCH] ARM: Fix nand boot of imx6q and imx6qdl boards

[Michael Nazzareno Trimarchi]

Hi Jagan

On Fri, Mar 8, 2019 at 7:25 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> On Wed, Mar 6, 2019 at 1:16 PM Michael Trimarchi
> <michael at amarulasolutions.com> wrote:
> >
> > The nand boot require a little more memory that we had previosly
> > allocated so it stopped booting.
> > This patch increase CONFIG_SPL_SYS_MALLOC_F_LEN to 0x2000.
> >
> > Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
> > ---
>
> Commit head to be specify the issue on relevant board, so it can be
>
> configs: icore: Fix U-Boot proper loading from nand
>
> SPL on Engicam i.Core M6 boards enabled DM, so it would require some malloc()
> pool before relocation in order to load U-Boot proper properly.
>
> So, enable SPL malloc() pool of 0x2000 size similarly like what we have used for
> icore mmc defconfigs.
>
> Once this is added,
>
> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>

I will upload again.

Michael


-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |