[U-Boot] [PATCH V2] Revert "pico-imx7d: Add LCD support"
Michael Nazzareno Trimarchi
michael at amarulasolutions.com
Tue Mar 12 18:29:06 UTC 2019
Hi
On Mon, Mar 11, 2019 at 10:47 PM Joris Offouga <offougajoris at gmail.com> wrote:
>
> This reverts commit 9e3c0174da842dd88f5feaffbf843ba332233897.
>
> This commit breaks U-Boot when is load with imx-usb-loader.
>
> Signed-off-by: Joris Offouga <offougajoris at gmail.com>
Can you try just define CONFIG_SYS_MALLOC_F_LEN=0x2000.
What is the value on your platform? we found it important on some SPL boot
scenario
Michael
> ---
> Changes for v2:
> - Add missing signed-off
> ---
> board/technexion/pico-imx7d/pico-imx7d.c | 55 --------------------------------
> configs/pico-hobbit-imx7d_defconfig | 1 -
> configs/pico-imx7d_defconfig | 1 -
> configs/pico-pi-imx7d_defconfig | 1 -
> include/configs/pico-imx7d.h | 12 -------
> 5 files changed, 70 deletions(-)
>
> diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c
> index 767d13d..53e1469 100644
> --- a/board/technexion/pico-imx7d/pico-imx7d.c
> +++ b/board/technexion/pico-imx7d/pico-imx7d.c
> @@ -39,16 +39,8 @@ DECLARE_GLOBAL_DATA_PTR;
> #define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
> PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
>
> -
> -#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
> - PAD_CTL_DSE_3P3V_49OHM)
> -
> -#define LCD_SYNC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
> - PAD_CTL_DSE_3P3V_196OHM)
> -
> #ifdef CONFIG_SYS_I2C_MXC
> #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
> -
> /* I2C4 for PMIC */
> static struct i2c_pads_info i2c_pad_info4 = {
> .scl = {
> @@ -254,58 +246,11 @@ int board_early_init_f(void)
> return 0;
> }
>
> -#ifdef CONFIG_VIDEO_MXS
> -static iomux_v3_cfg_t const lcd_pads[] = {
> - MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_SYNC_PAD_CTRL),
> - MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_SYNC_PAD_CTRL),
> - MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_SYNC_PAD_CTRL),
> - MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA18__LCD_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA19__LCD_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA20__LCD_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA21__LCD_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA22__LCD_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_LCD_DATA23__LCD_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_GPIO1_IO06__GPIO1_IO6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> - MX7D_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
> -};
> -
> -void setup_lcd(void)
> -{
> - imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
> - /* Set Brightness to high */
> - gpio_direction_output(IMX_GPIO_NR(1, 11) , 1);
> - /* Set LCD enable to high */
> - gpio_direction_output(IMX_GPIO_NR(1, 6) , 1);
> -}
> -#endif
> -
> int board_init(void)
> {
> /* address of boot parameters */
> gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
>
> -#ifdef CONFIG_VIDEO_MXS
> - setup_lcd();
> -#endif
> #ifdef CONFIG_FEC_MXC
> setup_fec();
> #endif
> diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig
> index f58d517..cb4a6bf 100644
> --- a/configs/pico-hobbit-imx7d_defconfig
> +++ b/configs/pico-hobbit-imx7d_defconfig
> @@ -57,5 +57,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
> CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
> CONFIG_CI_UDC=y
> -CONFIG_VIDEO=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig
> index 7e13923..f90d757 100644
> --- a/configs/pico-imx7d_defconfig
> +++ b/configs/pico-imx7d_defconfig
> @@ -57,5 +57,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
> CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
> CONFIG_CI_UDC=y
> -CONFIG_VIDEO=y
> CONFIG_OF_LIBFDT=y
> diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig
> index c8ac2ff..8e48ba7 100644
> --- a/configs/pico-pi-imx7d_defconfig
> +++ b/configs/pico-pi-imx7d_defconfig
> @@ -57,5 +57,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
> CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
> CONFIG_CI_UDC=y
> -CONFIG_VIDEO=y
> CONFIG_OF_LIBFDT=y
> diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
> index 0f6d6b7..1884c58 100644
> --- a/include/configs/pico-imx7d.h
> +++ b/include/configs/pico-imx7d.h
> @@ -64,12 +64,10 @@
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "script=boot.scr\0" \
> "image=zImage\0" \
> - "splashpos=m,m\0" \
> "console=ttymxc4\0" \
> "fdt_high=0xffffffff\0" \
> "initrd_high=0xffffffff\0" \
> "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
> - "videomode=video=ctfb:x:800,y:480,depth:24,mode:0,pclk:30000,le:46,ri:210,up:22,lo:23,hs:20,vs:10,sync:0,vmode:0\0" \
> BOOTMENU_ENV \
> "fdt_addr=0x83000000\0" \
> "fdt_addr_r=0x83000000\0" \
> @@ -133,16 +131,6 @@
> #define CONFIG_POWER_PFUZE3000
> #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
>
> -#ifdef CONFIG_VIDEO
> -#define CONFIG_VIDEO_MXS
> -#define CONFIG_VIDEO_LOGO
> -#define CONFIG_SPLASH_SCREEN
> -#define CONFIG_SPLASH_SCREEN_ALIGN
> -#define CONFIG_BMP_16BPP
> -#define CONFIG_VIDEO_BMP_RLE8
> -#define CONFIG_VIDEO_BMP_LOGO
> -#endif
> -
> /* FLASH and environment organization */
> #define CONFIG_ENV_SIZE SZ_8K
>
> --
> 2.7.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
More information about the U-Boot
mailing list