[U-Boot] [V4 3/3] sunxi: Use clrsetbits_le32 instead of multiple instruction

[Shyam Saini]

From: Michael Trimarchi <michael at amarulasolutions.com>

This will improve code readabilty

Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Shyam Saini <shyam.saini at amarulasolutions.com>
---
Changelogs:
	   V1->V2: none
	   V2->V3: Fix use of clrsetbits_le32 and setbits_le32 functions
	   V3->V4: Rebase to original series's patch 2 and 3
---
 arch/arm/mach-sunxi/dram_sun8i_a33.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-sunxi/dram_sun8i_a33.c b/arch/arm/mach-sunxi/dram_sun8i_a33.c
index 63e18f17d0db..9fe4c88bd87f 100644
--- a/arch/arm/mach-sunxi/dram_sun8i_a33.c
+++ b/arch/arm/mach-sunxi/dram_sun8i_a33.c
@@ -145,11 +145,8 @@ static void auto_set_timing_para(struct dram_para *para)
 	reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0);
 	writel(reg_val, &mctl_ctl->dramtmg5);
 	/* Set two rank timing and exit self-refresh timing */
-	reg_val = readl(&mctl_ctl->dramtmg8);
-	reg_val &= ~(0xff << 8);
-	reg_val &= ~(0xff << 0);
-	reg_val |= (0x33 << 8);
-	reg_val |= (0x10 << 0);
+	clrsetbits_le32(&mctl_ctl->dramtmg8, (0xff << 8) | (0xff << 0));
+	setbits_le32(&mctl_ctl->dramtmg8, (0x33 << 8) | (0x10 << 0));
 	writel(reg_val, &mctl_ctl->dramtmg8);
 	/* Set phy interface time */
 	reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8)
-- 
2.11.0