[U-Boot] [PATCH v1 11/14] colibri-imx6ull: migrate fec to using driver model

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Migrate Ethernet FEC to using driver model.
Drop PHY_MICREL_KSZ90X1 which slipped in from Apalis iMX6.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

---

 arch/arm/dts/imx6ull-colibri.dts  | 31 ++++++++++++++++---------------
 configs/colibri-imx6ull_defconfig |  3 +--
 include/configs/colibri-imx6ull.h |  4 ----
 3 files changed, 17 insertions(+), 21 deletions(-)

diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts
index 91e48aab61..2f8865c29c 100644
--- a/arch/arm/dts/imx6ull-colibri.dts
+++ b/arch/arm/dts/imx6ull-colibri.dts
@@ -80,6 +80,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 };
 
+/* Ethernet */
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
@@ -233,6 +234,21 @@
 };
 
 &iomuxc {
+	pinctrl_enet2: enet2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+		>;
+	};
+
 	pinctrl_gpio1: gpio1-grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x74 /* SODIMM 55 */
@@ -295,21 +311,6 @@
 		>;
 	};
 
-	pinctrl_enet2: enet2-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-		>;
-	};
-
 	pinctrl_ecspi1_cs: ecspi1-cs-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x000a0
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index 0440b4ed94..a24c87f321 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -58,9 +58,8 @@ CONFIG_NAND_MXS=y
 CONFIG_NAND_MXS_DT=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_PHYLIB=y
-CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 7a7a70e457..fc39e807b6 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -19,10 +19,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
 
 /* Network */
-#define CONFIG_FEC_XCV_TYPE             RMII
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_MXC_PHYADDR		0
-
 #define CONFIG_IP_DEFRAG
 #define CONFIG_TFTP_BLOCKSIZE		16352
 #define CONFIG_TFTP_TSIZE
-- 
2.20.1