[U-Boot] [PATCH 03/16] gdsys: mpc8308: Fix style violations
Mario Six
mario.six at gdsys.cc
Fri Mar 29 09:18:06 UTC 2019
Fix some style violations in the gdsys MPC8308 board files, and make the
code more readable.
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
board/gdsys/mpc8308/hrcon.c | 55 ++++++++++++++++++-----------------
board/gdsys/mpc8308/mpc8308.c | 12 ++++----
board/gdsys/mpc8308/strider.c | 49 ++++++++++++++++---------------
3 files changed, 59 insertions(+), 57 deletions(-)
diff --git a/board/gdsys/mpc8308/hrcon.c b/board/gdsys/mpc8308/hrcon.c
index 2d709dee945..79e3b25de8c 100644
--- a/board/gdsys/mpc8308/hrcon.c
+++ b/board/gdsys/mpc8308/hrcon.c
@@ -35,11 +35,11 @@
#define MAX_MUX_CHANNELS 2
enum {
- MCFPGA_DONE = 1 << 0,
- MCFPGA_INIT_N = 1 << 1,
- MCFPGA_PROGRAM_N = 1 << 2,
- MCFPGA_UPDATE_ENABLE_N = 1 << 3,
- MCFPGA_RESET_N = 1 << 4,
+ MCFPGA_DONE = BIT(0),
+ MCFPGA_INIT_N = BIT(1),
+ MCFPGA_PROGRAM_N = BIT(2),
+ MCFPGA_UPDATE_ENABLE_N = BIT(3),
+ MCFPGA_RESET_N = BIT(4),
};
enum {
@@ -47,7 +47,7 @@ enum {
GPIO_MDIO = 1 << 15,
};
-unsigned int mclink_fpgacount;
+uint mclink_fpgacount;
struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
struct {
@@ -107,7 +107,7 @@ int checkboard(void)
printf("HRCon %s", hw_type_cat ? "CAT" : "Fiber");
- if (s != NULL) {
+ if (s) {
puts(", serial# ");
puts(s);
}
@@ -120,12 +120,11 @@ int checkboard(void)
int last_stage_init(void)
{
int slaves;
- unsigned int k;
- unsigned int mux_ch;
- unsigned char mclink_controllers[] = { 0x3c, 0x3d, 0x3e };
+ uint k;
+ uchar mclink_controllers[] = { 0x3c, 0x3d, 0x3e };
u16 fpga_features;
bool hw_type_cat = pca9698_get_value(0x20, 20);
- bool ch0_rgmii2_present = false;
+ bool ch0_rgmii2_present;
FPGA_GET_REG(0, fpga_features, &fpga_features);
@@ -137,16 +136,16 @@ int last_stage_init(void)
/* wait for FPGA done, then reset FPGA */
for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) {
- unsigned int ctr = 0;
+ uint ctr = 0;
if (i2c_probe(mclink_controllers[k]))
continue;
while (!(pca953x_get_val(mclink_controllers[k])
& MCFPGA_DONE)) {
- udelay(100000);
+ mdelay(100);
if (ctr++ > 5) {
- printf("no done for mclink_controller %d\n", k);
+ printf("no done for mclink_controller %u\n", k);
break;
}
}
@@ -159,8 +158,10 @@ int last_stage_init(void)
}
if (hw_type_cat) {
+ uint mux_ch;
int retval;
struct mii_dev *mdiodev = mdio_alloc();
+
if (!mdiodev)
return -ENOMEM;
strncpy(mdiodev->name, bb_miiphy_buses[0].name, MDIO_NAME_LEN);
@@ -179,7 +180,7 @@ int last_stage_init(void)
}
/* give slave-PLLs and Parade DP501 some time to be up and running */
- udelay(500000);
+ mdelay(500);
mclink_fpgacount = CONFIG_SYS_MCLINK_MAX;
slaves = mclink_probe();
@@ -207,6 +208,7 @@ int last_stage_init(void)
if (hw_type_cat) {
int retval;
struct mii_dev *mdiodev = mdio_alloc();
+
if (!mdiodev)
return -ENOMEM;
strncpy(mdiodev->name, bb_miiphy_buses[k].name,
@@ -233,17 +235,17 @@ int last_stage_init(void)
* provide access to fpga gpios and controls (for I2C bitbang)
* (these may look all too simple but make iocon.h much more readable)
*/
-void fpga_gpio_set(unsigned int bus, int pin)
+void fpga_gpio_set(uint bus, int pin)
{
FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.set, pin);
}
-void fpga_gpio_clear(unsigned int bus, int pin)
+void fpga_gpio_clear(uint bus, int pin)
{
FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.clear, pin);
}
-int fpga_gpio_get(unsigned int bus, int pin)
+int fpga_gpio_get(uint bus, int pin)
{
u16 val;
@@ -252,7 +254,7 @@ int fpga_gpio_get(unsigned int bus, int pin)
return val & pin;
}
-void fpga_control_set(unsigned int bus, int pin)
+void fpga_control_set(uint bus, int pin)
{
u16 val;
@@ -260,7 +262,7 @@ void fpga_control_set(unsigned int bus, int pin)
FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, control, val | pin);
}
-void fpga_control_clear(unsigned int bus, int pin)
+void fpga_control_clear(uint bus, int pin)
{
u16 val;
@@ -273,7 +275,7 @@ void mpc8308_init(void)
pca9698_direction_output(0x20, 4, 1);
}
-void mpc8308_set_fpga_reset(unsigned state)
+void mpc8308_set_fpga_reset(uint state)
{
pca9698_set_value(0x20, 4, state ? 0 : 1);
}
@@ -285,11 +287,11 @@ void mpc8308_setup_hw(void)
/*
* set "startup-finished"-gpios
*/
- setbits_be32(&immr->gpio[0].dir, (1 << (31-11)) | (1 << (31-12)));
- setbits_be32(&immr->gpio[0].dat, 1 << (31-12));
+ setbits_be32(&immr->gpio[0].dir, (BIT(31 - 11) | BIT(31 - 12)));
+ setbits_be32(&immr->gpio[0].dat, BIT(31 - 12));
}
-int mpc8308_get_fpga_done(unsigned fpga)
+int mpc8308_get_fpga_done(uint fpga)
{
return pca9698_get_value(0x20, 19);
}
@@ -367,7 +369,7 @@ int ft_board_setup(void *blob, bd_t *bd)
*/
struct fpga_mii {
- unsigned fpga;
+ uint fpga;
int mdio;
} fpga_mii[] = {
{ 0, 1},
@@ -494,5 +496,4 @@ struct bb_miiphy_bus bb_miiphy_buses[] = {
},
};
-int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
- sizeof(bb_miiphy_buses[0]);
+int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);
diff --git a/board/gdsys/mpc8308/mpc8308.c b/board/gdsys/mpc8308/mpc8308.c
index 0112244fc79..9fe1d66c605 100644
--- a/board/gdsys/mpc8308/mpc8308.c
+++ b/board/gdsys/mpc8308/mpc8308.c
@@ -24,14 +24,14 @@
DECLARE_GLOBAL_DATA_PTR;
-int get_fpga_state(unsigned dev)
+int get_fpga_state(uint dev)
{
return gd->arch.fpga_state[dev];
}
int board_early_init_f(void)
{
- unsigned k;
+ uint k;
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
gd->arch.fpga_state[k] = 0;
@@ -41,8 +41,8 @@ int board_early_init_f(void)
int board_early_init_r(void)
{
- unsigned k;
- unsigned ctr;
+ uint k;
+ uint ctr;
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
gd->arch.fpga_state[k] = 0;
@@ -59,7 +59,7 @@ int board_early_init_r(void)
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
ctr = 0;
while (!mpc8308_get_fpga_done(k)) {
- udelay(100000);
+ mdelay(100);
if (ctr++ > 5) {
gd->arch.fpga_state[k] |=
FPGA_STATE_DONE_FAILED;
@@ -86,7 +86,7 @@ int board_early_init_r(void)
if (val == REFLECTION_TESTPATTERN_INV)
break;
- udelay(100000);
+ mdelay(100);
if (ctr++ > 5) {
gd->arch.fpga_state[k] |=
FPGA_STATE_REFLECTION_FAILED;
diff --git a/board/gdsys/mpc8308/strider.c b/board/gdsys/mpc8308/strider.c
index fa26585296a..b1997f453ae 100644
--- a/board/gdsys/mpc8308/strider.c
+++ b/board/gdsys/mpc8308/strider.c
@@ -50,7 +50,7 @@ enum {
GPIO_MDIO = 1 << 15,
};
-unsigned int mclink_fpgacount;
+uint mclink_fpgacount;
struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
struct {
@@ -110,7 +110,7 @@ int checkboard(void)
printf("Strider %s", hw_type_cat ? "CAT" : "Fiber");
- if (s != NULL) {
+ if (s) {
puts(", serial# ");
puts(s);
}
@@ -123,17 +123,17 @@ int checkboard(void)
int last_stage_init(void)
{
int slaves;
- unsigned int k;
- unsigned int mux_ch;
- unsigned char mclink_controllers_dvi[] = { 0x3c, 0x3d, 0x3e };
+ uint k;
+ uint mux_ch;
+ uchar mclink_controllers_dvi[] = { 0x3c, 0x3d, 0x3e };
#ifdef CONFIG_STRIDER_CPU
- unsigned char mclink_controllers_dp[] = { 0x24, 0x25, 0x26 };
+ uchar mclink_controllers_dp[] = { 0x24, 0x25, 0x26 };
#endif
bool hw_type_cat = pca9698_get_value(0x20, 18);
#ifdef CONFIG_STRIDER_CON_DP
bool is_dh = pca9698_get_value(0x20, 25);
#endif
- bool ch0_sgmii2_present = false;
+ bool ch0_sgmii2_present;
/* Turn on Analog Devices ADV7611 */
pca9698_direction_output(0x20, 8, 0);
@@ -146,8 +146,8 @@ int last_stage_init(void)
/* wait for FPGA done, then reset FPGA */
for (k = 0; k < ARRAY_SIZE(mclink_controllers_dvi); ++k) {
- unsigned int ctr = 0;
- unsigned char *mclink_controllers = mclink_controllers_dvi;
+ uint ctr = 0;
+ uchar *mclink_controllers = mclink_controllers_dvi;
#ifdef CONFIG_STRIDER_CPU
if (i2c_probe(mclink_controllers[k])) {
@@ -161,7 +161,7 @@ int last_stage_init(void)
#endif
while (!(pca953x_get_val(mclink_controllers[k])
& MCFPGA_DONE)) {
- udelay(100000);
+ mdelay(100);
if (ctr++ > 5) {
printf("no done for mclink_controller %d\n", k);
break;
@@ -178,6 +178,7 @@ int last_stage_init(void)
if (hw_type_cat) {
int retval;
struct mii_dev *mdiodev = mdio_alloc();
+
if (!mdiodev)
return -ENOMEM;
strncpy(mdiodev->name, bb_miiphy_buses[0].name, MDIO_NAME_LEN);
@@ -196,7 +197,7 @@ int last_stage_init(void)
}
/* give slave-PLLs and Parade DP501 some time to be up and running */
- udelay(500000);
+ mdelay(500);
mclink_fpgacount = CONFIG_SYS_MCLINK_MAX;
slaves = mclink_probe();
@@ -235,7 +236,7 @@ int last_stage_init(void)
for (k = 1; k <= slaves; ++k)
FPGA_SET_REG(k, extended_control, 0x10); /* enable video */
- udelay(500000);
+ mdelay(500);
#endif
for (k = 1; k <= slaves; ++k) {
@@ -260,6 +261,7 @@ int last_stage_init(void)
if (hw_type_cat) {
int retval;
struct mii_dev *mdiodev = mdio_alloc();
+
if (!mdiodev)
return -ENOMEM;
strncpy(mdiodev->name, bb_miiphy_buses[k].name,
@@ -286,17 +288,17 @@ int last_stage_init(void)
* provide access to fpga gpios (for I2C bitbang)
* (these may look all too simple but make iocon.h much more readable)
*/
-void fpga_gpio_set(unsigned int bus, int pin)
+void fpga_gpio_set(uint bus, int pin)
{
FPGA_SET_REG(bus, gpio.set, pin);
}
-void fpga_gpio_clear(unsigned int bus, int pin)
+void fpga_gpio_clear(uint bus, int pin)
{
FPGA_SET_REG(bus, gpio.clear, pin);
}
-int fpga_gpio_get(unsigned int bus, int pin)
+int fpga_gpio_get(uint bus, int pin)
{
u16 val;
@@ -306,7 +308,7 @@ int fpga_gpio_get(unsigned int bus, int pin)
}
#ifdef CONFIG_STRIDER_CON_DP
-void fpga_control_set(unsigned int bus, int pin)
+void fpga_control_set(uint bus, int pin)
{
u16 val;
@@ -314,7 +316,7 @@ void fpga_control_set(unsigned int bus, int pin)
FPGA_SET_REG(bus, control, val | pin);
}
-void fpga_control_clear(unsigned int bus, int pin)
+void fpga_control_clear(uint bus, int pin)
{
u16 val;
@@ -328,7 +330,7 @@ void mpc8308_init(void)
pca9698_direction_output(0x20, 26, 1);
}
-void mpc8308_set_fpga_reset(unsigned state)
+void mpc8308_set_fpga_reset(uint state)
{
pca9698_set_value(0x20, 26, state ? 0 : 1);
}
@@ -340,11 +342,11 @@ void mpc8308_setup_hw(void)
/*
* set "startup-finished"-gpios
*/
- setbits_be32(&immr->gpio[0].dir, (1 << (31-11)) | (1 << (31-12)));
- setbits_be32(&immr->gpio[0].dat, 1 << (31-12));
+ setbits_be32(&immr->gpio[0].dir, BIT(31 - 11) | BIT(31 - 12));
+ setbits_be32(&immr->gpio[0].dat, BIT(31 - 12));
}
-int mpc8308_get_fpga_done(unsigned fpga)
+int mpc8308_get_fpga_done(uint fpga)
{
return pca9698_get_value(0x20, 20);
}
@@ -422,7 +424,7 @@ int ft_board_setup(void *blob, bd_t *bd)
*/
struct fpga_mii {
- unsigned fpga;
+ uint fpga;
int mdio;
} fpga_mii[] = {
{ 0, 1},
@@ -549,5 +551,4 @@ struct bb_miiphy_bus bb_miiphy_buses[] = {
},
};
-int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
- sizeof(bb_miiphy_buses[0]);
+int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);
--
2.20.1
More information about the U-Boot
mailing list