[U-Boot] [PATCH v4 1/5] ARM: board: meson: rename odroid-c2 to p200
Neil Armstrong
narmstrong at baylibre.com
Sat Mar 23 10:10:10 UTC 2019
Le 15/03/2019 16:11, Mohammad Rasim a écrit :
> This renames the odroid-c2 to p200 and set it as the default GXBB board
> Other boards (odroid-c2 and nanopi-k2) will inherit from p200
>
> Signed-off-by: Mohammad Rasim <mohammad.rasim96 at gmail.com>
> ---
> arch/arm/mach-meson/Kconfig | 2 +-
> board/amlogic/{odroid-c2 => p200}/MAINTAINERS | 6 +-
> board/amlogic/{odroid-c2 => p200}/Makefile | 2 +-
> .../{odroid-c2 => p200}/README.nanopi-k2 | 0
> .../{odroid-c2 => p200}/README.odroid-c2 | 0
> board/amlogic/p200/README.p200 | 103 ++++++++++++++++++
This new file should go in patch 4
> .../{odroid-c2/odroid-c2.c => p200/p200.c} | 0
> configs/nanopi-k2_defconfig | 1 +
> configs/odroid-c2_defconfig | 1 +
> 9 files changed, 110 insertions(+), 5 deletions(-)
> rename board/amlogic/{odroid-c2 => p200}/MAINTAINERS (70%)
> rename board/amlogic/{odroid-c2 => p200}/Makefile (82%)
> rename board/amlogic/{odroid-c2 => p200}/README.nanopi-k2 (100%)
> rename board/amlogic/{odroid-c2 => p200}/README.odroid-c2 (100%)
> create mode 100644 board/amlogic/p200/README.p200
> rename board/amlogic/{odroid-c2/odroid-c2.c => p200/p200.c} (100%)
>
> diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
> index 11077bc6cc24..1b1d0aef0d22 100644
> --- a/arch/arm/mach-meson/Kconfig
> +++ b/arch/arm/mach-meson/Kconfig
> @@ -61,7 +61,7 @@ config SYS_VENDOR
>
> config SYS_BOARD
> string "Board name"
> - default "odroid-c2" if MESON_GXBB
> + default "p200" if MESON_GXBB
> default "p212" if MESON_GXL
> default "q200" if MESON_GXM
> default "s400" if MESON_AXG
> diff --git a/board/amlogic/odroid-c2/MAINTAINERS b/board/amlogic/p200/MAINTAINERS
> similarity index 70%
> rename from board/amlogic/odroid-c2/MAINTAINERS
> rename to board/amlogic/p200/MAINTAINERS
> index 6a853066d781..96fe92dd0874 100644
> --- a/board/amlogic/odroid-c2/MAINTAINERS
> +++ b/board/amlogic/p200/MAINTAINERS
> @@ -1,8 +1,8 @@
> -ODROID-C2
> +P200
> M: Beniamino Galvani <b.galvani at gmail.com>
> M: Neil Armstrong <narmstrong at baylibre.com>
> S: Maintained
> -F: board/amlogic/odroid-c2/
> -F: include/configs/odroid-c2.h
Good catch here
> +F: board/amlogic/p200/
> F: configs/nanopi-k2_defconfig
> F: configs/odroid-c2_defconfig
> +F: configs/p200_defconfig
You should add this one in patch 4
> diff --git a/board/amlogic/odroid-c2/Makefile b/board/amlogic/p200/Makefile
> similarity index 82%
> rename from board/amlogic/odroid-c2/Makefile
> rename to board/amlogic/p200/Makefile
> index a6a3db755f21..f82a7ea9ca6b 100644
> --- a/board/amlogic/odroid-c2/Makefile
> +++ b/board/amlogic/p200/Makefile
> @@ -2,4 +2,4 @@
> #
> # (C) Copyright 2016 Beniamino Galvani <b.galvani at gmail.com>
>
> -obj-y := odroid-c2.o
> +obj-y := p200.o
> diff --git a/board/amlogic/odroid-c2/README.nanopi-k2 b/board/amlogic/p200/README.nanopi-k2
> similarity index 100%
> rename from board/amlogic/odroid-c2/README.nanopi-k2
> rename to board/amlogic/p200/README.nanopi-k2
> diff --git a/board/amlogic/odroid-c2/README.odroid-c2 b/board/amlogic/p200/README.odroid-c2
> similarity index 100%
> rename from board/amlogic/odroid-c2/README.odroid-c2
> rename to board/amlogic/p200/README.odroid-c2
> diff --git a/board/amlogic/p200/README.p200 b/board/amlogic/p200/README.p200
> new file mode 100644
> index 000000000000..01d82d1e79e3
> --- /dev/null
> +++ b/board/amlogic/p200/README.p200
> @@ -0,0 +1,103 @@
> +U-Boot for Amlogic P200
> +=======================
> +
> +P200 is a reference board manufactured by Amlogic with the following
> +specifications:
> +
> + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
> + - ARM Mali 450 GPU
> + - 2GB DDR3 SDRAM
> + - Gigabit Ethernet
> + - HDMI 2.0 4K/60Hz display
> + - 2 x USB 2.0 Host
> + - eMMC, microSD
> + - Infrared receiver
> + - SDIO WiFi Module
> + - CVBS+Stereo Audio Jack
> +
> +Schematics are available from Amlogic on demand.
> +
> +Currently the u-boot port supports the following devices:
> + - serial
> + - eMMC, microSD
> + - Ethernet
> + - I2C
> + - Regulators
> + - Reset controller
> + - Clock controller
> + - USB Host
> + - ADC
> +
> +u-boot compilation
> +==================
> +
> + > export ARCH=arm
> + > export CROSS_COMPILE=aarch64-none-elf-
> + > make p200_defconfig
> + > make
> +
> +Image creation
> +==============
> +
> +Amlogic doesn't provide sources for the firmware and for tools needed
> +to create the bootloader image, so it is necessary to obtain them from
> +the git tree published by the board vendor:
> +
> + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
> + > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot
> + > cd amlogic-u-boot
> + > make gxb_p200_v1_defconfig
> + > make
> + > export FIPDIR=$PWD/fip
> +
> +Go back to mainline U-boot source tree then :
> + > mkdir fip
> +
> + > cp $FIPDIR/gxl/bl2.bin fip/
> + > cp $FIPDIR/gxl/acs.bin fip/
> + > cp $FIPDIR/gxl/bl21.bin fip/
> + > cp $FIPDIR/gxl/bl30.bin fip/
> + > cp $FIPDIR/gxl/bl301.bin fip/
> + > cp $FIPDIR/gxl/bl31.img fip/
> + > cp u-boot.bin fip/bl33.bin
> +
> + > $FIPDIR/blx_fix.sh \
> + fip/bl30.bin \
> + fip/zero_tmp \
> + fip/bl30_zero.bin \
> + fip/bl301.bin \
> + fip/bl301_zero.bin \
> + fip/bl30_new.bin \
> + bl30
> +
> + > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
> +
> + > $FIPDIR/blx_fix.sh \
> + fip/bl2_acs.bin \
> + fip/zero_tmp \
> + fip/bl2_zero.bin \
> + fip/bl21.bin \
> + fip/bl21_zero.bin \
> + fip/bl2_new.bin \
> + bl2
> +
> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
> + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
> + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
> + --output fip/u-boot.bin \
> + --bl2 fip/bl2.n.bin.sig \
> + --bl30 fip/bl30_new.bin.enc \
> + --bl31 fip/bl31.img.enc \
> + --bl33 fip/bl33.bin.enc
> +
> +and then write the image to SD with:
> +
> + > DEV=/dev/your_sd_device
> + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
> diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/p200/p200.c
> similarity index 100%
> rename from board/amlogic/odroid-c2/odroid-c2.c
> rename to board/amlogic/p200/p200.c
> diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig
> index 8bbf48f41f7d..a513bc7cf8ce 100644
> --- a/configs/nanopi-k2_defconfig
> +++ b/configs/nanopi-k2_defconfig
> @@ -38,3 +38,4 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_DEBUG_UART_SKIP_INIT=y
> CONFIG_MESON_SERIAL=y
> CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_SYS_BOARD="p200"
> diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig
> index 747da184b3ad..f19b291164b7 100644
> --- a/configs/odroid-c2_defconfig
> +++ b/configs/odroid-c2_defconfig
> @@ -39,3 +39,4 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_DEBUG_UART_SKIP_INIT=y
> CONFIG_MESON_SERIAL=y
> CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_SYS_BOARD="p200"
No need for these last two changes, you changed the
default SYS_BOARD config to p200
> --
> 2.21.0
>
Neil
More information about the U-Boot
mailing list