[U-Boot] [U-Boot, v1, 26/26] board: colibri_imx6: check for and report ecc errors in fuses

[Stefano Babic]

On 24/03/19 22:42, Marcel Ziswiler wrote:
> Hi Stefano
> 
> On Wed, 2019-03-13 at 09:38 +0000, sbabic at denx.de wrote:
>>> From: Gerard Salvatella <gerard.salvatella at toradex.com>
>>> The PMIC on the Colibri iMX6 may have ECC errors in fuses that will
>>> prevent correct settings. Up to one bit error per fuse bank can be
>>> reported and corrected by the ECC logic. Two bit errors can only be
>>> reported.
>>> Signed-off-by: Gerard Salvatella <gerard.salvatella at toradex.com>
>>> Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>>
>> Applied to u-boot-imx, -next, thanks !
> 
> Unfortunately, I can't find that one anywhere on u-boot-imx.git/next.
> 
> I will resend it as a separate patch for you to pick up, OK?

mmhhh...I have applied them, I see in my local -next, I am sure I pushed
before. Let me see why they do not appear on git.denx.de, you do not
need to repush, they are alreay applied.

> 
> BTW: I will also send a V2 of the Colibri Vybrid stuff, plus the
> Colibri iMX6ULL overhaul and the initial add of the Colibri iMX8QXP.

Ok, thanks for info. I set V1 as obsolete in patchwork.

Regards,
Stefano

> 
>> Best regards,
>> Stefano Babic
> 
> Cheers
> 
> Marcel
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================