[U-Boot] [PATCH v3 6/6] i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover

[Ismael Luceno Cortes]

Cosmetic change.  Any call to the recover function would need to do the
same check afterwards, so it's sensible to make it part of the function.

Signed-off-by: Ismael Luceno <ismael.luceno at silicon-gears.com>
---
 drivers/i2c/rcar_i2c.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c
index 78ef8acacc..8fe0aadffa 100644
--- a/drivers/i2c/rcar_i2c.c
+++ b/drivers/i2c/rcar_i2c.c
@@ -81,12 +81,13 @@ static int rcar_i2c_finish(struct udevice *dev)
 	return ret;
 }
 
-static void rcar_i2c_recover(struct udevice *dev)
+static int rcar_i2c_recover(struct udevice *dev)
 {
 	struct rcar_i2c_priv *priv = dev_get_priv(dev);
 	u32 mcr = RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_OBPC;
 	u32 mcra = mcr | RCAR_I2C_ICMCR_FSDA;
 	int i;
+	u32 mstat;
 
 	/* Send 9 SCL pulses */
 	for (i = 0; i < 9; i++) {
@@ -106,6 +107,9 @@ static void rcar_i2c_recover(struct udevice *dev)
 	udelay(5);
 	writel(mcra | RCAR_I2C_ICMCR_FSCL, priv->base + RCAR_I2C_ICMCR);
 	udelay(5);
+
+	mstat = readl(priv->base + RCAR_I2C_ICMSR);
+	return mstat & RCAR_I2C_ICMCR_FSDA ? -EBUSY : 0;
 }
 
 static int rcar_i2c_set_addr(struct udevice *dev, u8 chip, u8 read)
@@ -125,9 +129,7 @@ static int rcar_i2c_set_addr(struct udevice *dev, u8 chip, u8 read)
 	ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMCR,
 				RCAR_I2C_ICMCR_FSDA, false, 2, true);
 	if (ret) {
-		rcar_i2c_recover(dev);
-		val = readl(priv->base + RCAR_I2C_ICMSR);
-		if (val & RCAR_I2C_ICMCR_FSDA) {
+		if (rcar_i2c_recover(dev)) {
 			dev_err(dev, "Bus busy, aborting\n");
 			return ret;
 		}
-- 
2.19.1