[U-Boot] [PATCH 2/3] net: rtl8169: Implement ->hwaddr_write() callback

Thierry Reding thierry.reding at gmail.com
Fri Mar 8 19:51:26 UTC 2019


From: Thierry Reding <treding at nvidia.com>

Implement this callback that allows the MAC address to be set for the
Ethernet card. This is necessary in order for the device to be able to
receive packets for the MAC address that U-Boot advertises.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 drivers/net/rtl8169.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index a78f3d233f1a..27e27b34176b 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -941,6 +941,23 @@ static void rtl_halt(struct eth_device *dev)
 }
 #endif
 
+#ifdef CONFIG_DM_ETH
+static int rtl8169_write_hwaddr(struct udevice *dev)
+{
+	struct eth_pdata *plat = dev_get_platdata(dev);
+	unsigned int i;
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+	for (i = 0; i < MAC_ADDR_LEN; i++)
+		RTL_W8(MAC0 + i, plat->enetaddr[i]);
+
+	RTL_W8(Cfg9346, Cfg9346_Lock);
+
+	return 0;
+}
+#endif
+
 /**************************************************************************
 INIT - Look for an adapter, this routine's visible to the outside
 ***************************************************************************/
@@ -1195,6 +1212,7 @@ static const struct eth_ops rtl8169_eth_ops = {
 	.send	= rtl8169_eth_send,
 	.recv	= rtl8169_eth_recv,
 	.stop	= rtl8169_eth_stop,
+	.write_hwaddr = rtl8169_write_hwaddr,
 };
 
 static const struct udevice_id rtl8169_eth_ids[] = {
-- 
2.20.1



More information about the U-Boot mailing list