[U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Offouga Joris
offougajoris at gmail.com
Sat Mar 9 22:21:34 UTC 2019
> Le 28 févr. 2019 à 23:06, Offouga Joris <offougajoris at gmail.com> a écrit :
>
>
>
>> Le 28 févr. 2019 à 21:38, Fabio Estevam <festevam at gmail.com> a écrit :
>>
>> Hi Joris,
>>
>>> On Sat, Feb 16, 2019 at 1:25 PM Fabio Estevam <festevam at gmail.com> wrote:
>>>
>>> Just run a "git bisect" and the problem comes from:
>>>
>>> commit 9e3c0174da842dd88f5feaffbf843ba332233897 (refs/bisect/bad)
>>> Author: Fabio Estevam <festevam at gmail.com>
>>> Date: Tue Dec 11 16:40:38 2018 -0200
>>>
>>> pico-imx7d: Add LCD support
>>>
>>> Add support for the VXT VL050-8048NT-C01 panel connected through
>>> the 24 bit parallel LCDIF interface.
>>>
>>> Signed-off-by: Fabio Estevam <festevam at gmail.com>
>>> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>>>
>>> It used to work at some point as I could see the splashscreen logo in
>>> the screen.
>>
>> Just a quick update: if I boot from eMMC I don't see this video
>> related hang. I only see the hang when I boot from USB.
> I do not have the screen connected when I do my tests and I disabled CONFIG_VIDEO because it lacks the GPIOs for the screen in the current device tree
Hi Fabio,
I revert the commit about add lcd and on u-boot master and u-boot imx i have the u-boot is flashed correctly in usb and dfu.
do you agree that I send the revert of the commit?
Best Regards,
Joris
More information about the U-Boot
mailing list